Cover Image

MODELING CONTROLLED ASYNCHRONOUS ELECTRIC DRIVES WITH MATCHING REDUCERS AND TRANSFORMERS

Purpose. Working out of mathematical models of the speed-controlled induction electric drives ensuring joint consideration of transformers, motors and loadings, and also matching reducers and transformers, both in static, and in dynamic regimes for the analysis of their operating characteristics. Me...

Full description

Saved in:

Bibliographic Details
Date:	2015
Main Authors:	Petrushin, V. S., Yakimets, A. M., Jenoktajev, R. N.
Format:	Article
Language:	Russian
Published:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2015
Subjects:	induction electric drive reducer transformer an speed-controlled induction motor adjusting characteristics dynamic models thermal state band measure cost of losses well-founded sampling 621.313.333.2
Online Access:	http://eie.khpi.edu.ua/article/view/2074-272X.2015.2.05
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Similar Items

DESIGN RANGE CRITERIA IN DESIGNING OF CONTROLLED ASYNCHRONOUS MOTORS
by: Petrushin, V. S., et al.
Published: (2014)

RESEARCH OF DYNAMIC CHARACTERISTICS OF INDUCTION MOTORS IN ELECTRIC DRIVES WITH MATCHING TRANSFORMER AND REDUCER
by: Petrushin, V. S., et al.
Published: (2019)

Energy-efficient induction motors designing with application of a modified criterion of reduced costs
by: Petrushin, V. S.
Published: (2014)

STABILIZATION OF PARAMETERS OF ASYNCHRONOUS ELECTRIC DRIVE WITH VECTOR CONTROL
by: Khlopenko, N. J., et al.
Published: (2015)

ANALYSIS OF A THYRISTOR VOLTAGE CONVERTER FED INDUCTION MOTOR START
by: Petrushin, V. S., et al.
Published: (2012)

COMPARISON OF ADJUSTABLE HIGH-PHASE ORDER INDUCTION MOTORS’ MERITS
by: Petrushin, V. S., et al.
Published: (2016)

REACTIVE CURRENT OF AN INDUCTION ELECTRIC DRIVES WITH THYRISTOR VOLTAGE REGULATOR
by: Kovalova, J. V.
Published: (2014)

Investigation of a three-phase-single-phase induction electric drive under stochastic loads
by: Shurub, Yu. V.
Published: (2014)

Optimization of loading modes of a controlled asynchronous electric drive
by: Kanov, L. N.
Published: (2013)

STATISTICAL OPTIMIZATION OF FREQUENCY REGULATED INDUCTION ELECTRIC DRIVES WITH SCALAR CONTROL
by: Shurub, Yu. V.
Published: (2017)

Analysis of suitable converter for the implementation of drive system in solar photovoltaic panels
by: Themozhi, G., et al.
Published: (2024)

A MATHEMATICAL MODEL OF THERMAL POWER PLANTS SMOKE EXHAUSTERS INDUCTION MOTORS SYSTEM OPERATION MODES
by: Vasyliv, K. M.
Published: (2017)

The high harmonic components of voltage and current of the asynchronous generator with short-circuited rotor winding in small wind and hydroelectric installations
by: Vasko, P., et al.
Published: (2016)

HARMONIC ANALYSIS OF THE COMBINED CIRCUIT OF SINGLE-PHASE SWITCHING OF INDUCTION ELECTRIC DRIVE WITH THYRISTOR CONTROL
by: Shurub, Yu. V., et al.
Published: (2020)

Refined calculation of energy modes of a frequency-regulated induction motor
by: Volkov, V. A., et al.
Published: (2024)

CALCULATION AND DESIGN OF A ROBUST SPEED CONTROLLER OF A FREQUENCY-CONTROLLED INDUCTION ELECTRIC DRIVE
by: Khlopenko, N. J.
Published: (2020)

Improved speed sensorless control for induction motor drives using rotor flux angle estimation
by: Tran, C. D., et al.
Published: (2025)

ANALYSIS OF THE SPECIAL FEATURES OF THE THERMAL PROCESS IN AN INDUCTION GENERATOR AT HIGH SATURATION OF THE MAGNETIC SYSTEM
by: Chenchevoi, V., et al.
Published: (2017)

Development and study of a microprocessor automatic control system for a mono-switch tie type with a linear inductive electric motor and a discrete speed controller
by: Buriakovskyi, S. G., et al.
Published: (2022)

PECULIARITIES OF DYNAMICS OF A FAST-DRIVEN INDUCTION-DYNAMIC DRIVE WITH A BISTABLE LATCH OF CONTACTS POSITION OF A CIRCUIT BREAKER BASED ON PERMANENT MAGNETS
by: Baida, E. I., et al.
Published: (2020)

REACTIVE POWER COMPENSATION IN ASYNCHRONOUS ELECTRIC DRIVES.
by: Malyar, V. S., et al.
Published: (2013)

MODELLING OF DYNAMIC MODES OF AN INDUCTION ELECTRIC DRIVE AT PERIODIC LOAD
by: Malyar, V. S., et al.
Published: (2020)

Research for an enhanced fault-tolerant solution against the current sensor fault types in induction motor drives
by: Tran, C. D., et al.
Published: (2024)

ANALYSIS OF ELECTRICITY CONSUMPTION OF INDUCTION MOTORS OF IE1 AND IE2 EFFICIENCY CLASSES IN A 11 kW PUMP INSTALLATION
by: Oshurbekov, S. Kh., et al.
Published: (2020)

OBJECTIVE FUNCTIONS OF THE COMPARATIVE ANALYSIS OF THE ENERGY EFFICIENCY OF ELECTROMAGNETIC SYSTEMS OF INDUCTION MOTORS WITH INNER AND OUTER ROTORS
by: Stavinskii, A. A., et al.
Published: (2015)

POWER CHARACTERISTICS OF A VIBRATOR WITH A LINEAR NONSALIENT-POLE ARMATURE MOTOR DRIVE
by: Bondar, R. P.
Published: (2014)

Statistical Analysis of Employment and Health Impacts on Demographic Trends in the Kakheti Region of Georgia
by: Dokhturishvili, Nino, et al.
Published: (2025)

THE DIAGNOSTICS OF INDUCTION MOTORS ROTOR BAR BREAKS BASED ON THE ANALYSIS OF ELECTROMOTIVE FORCE IN THE STATOR WINDINGS
by: Zagirnyak, M. V., et al.
Published: (2014)

Additional power loss in a frequency-controlled induction motor due to voltage higher harmonics
by: Petrenko, A. N., et al.
Published: (2012)

Mathematical modelling of transients in the electric drive of the turnout of the mono-sleeper type with switched-inductor motor
by: Buriakovskyi, S. G., et al.
Published: (2021)

Performance enhancement of direct torque control induction motor drive using space vector modulation strategy
by: Moussaoui, L.
Published: (2022)

RESEARCH INTO VALVE-ENGINE TRANSDUCERS OF BRUSHLESS SYNCHRONOUS AND ASYNCHRONIZED MACHINES IN A CIRCUIT SIMULATION SYSTEM.
by: Galinovskiy, A. M.
Published: (2013)

The experience of comparing the variations of the induction vector in magnetically conjugate points
by: Rokityansky, I., et al.
Published: (2017)

COMPARATIVE ANALYSIS OF ACTIVE POWER LOSSES OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
by: Stavinskii, A. A., et al.
Published: (2015)

Primary Large Sample Partitioning for Diagnosis and Recognition Problem Solving on the Basis of Computational Intelligence Methods
by: Subbotin, S. A.
Published: (2013)

PERFORMANCE ANALYSIS OF SIX-PHASE INDUCTION MACHINE-MULTILEVEL INVERTER WITH ARBITRARY DISPLACEMENT
by: Ben Slimene, Marwa
Published: (2020)

REGULARITIES OF ELECTROMAGNETIC PROCESSES OF A CONTACTLESS EXCITATION SYSTEM OF AN ASYNCHRONIZED GENERATOR BASED ON A CASCADE THREE-PHASE-THREE-PHASE VOLTAGE MODULATOR IN A SINGLE-STAR CIRCUIT
by: Vasyliv, K. M.
Published: (2018)

Variations of induction vector in North America
by: Babak, V., et al.
Published: (2014)

Implementation of a new flux rotor based on model reference adaptive system for sensorless direct torque control modified for induction motor
by: Saifi, R.
Published: (2023)

DIAGNOSTICS OF INDUCTION MOTOR ROTOR COMBINED DEFECTS WITH AN INDUCTION METHOD
by: Vaskovskyi, Yu. M., et al.
Published: (2013)