STATISTICAL PROCEDURES FOR TWO-SIDED LIMIT OF A CONTROLLED PARAMETER IN THE PROCESS OF PRODUCTION OF CABLE AND WIRE PRODUCTS

• Видавець: National Technical University "Kharkiv Polytechnic Institute" and State Institution “Institute of Technical Problems of Magnetism of the National Academy of Sciences of Ukraine”
• Дата: 2016
• Автор: Golik, O. V.
• Формат: Стаття
• Мова: English; Russian
• Опубліковано: National Technical University "Kharkiv Polytechnic Institute" and State Institution “Institute of Technical Problems of Magnetism of the National Academy of Sciences of Ukraine” 2016
• Теми: enameled wire; double polyimide insulation; control card; maximum probability of the parameter exit for the regulatory limit; 621.315.2; эмальпровод; двойная полиимидная изоляция; контрольная карта; максимальная вероятность выхода параметра за нормативный предел; емальдріт; подвійна поліімідна ізоляція; контрольна карта; максимальна ймовірність виходу параметра за нормативну межу
• Онлайн доступ: http://eie.khpi.edu.ua/article/view/2074-272X.2016.5.07

Purpose. To consider issues of statistical control in the process of mass production of cable and wire products on the example of enameled wire. To analyze the results of direct control of the diameter of the wire in two-layer polyimide insulation in a continuous technological cycle. To submit to th...