STATISTICAL PROCEDURES FOR TWO-SIDED LIMIT OF A CONTROLLED PARAMETER IN THE PROCESS OF PRODUCTION OF CABLE AND WIRE PRODUCTS
Purpose. To consider issues of statistical control in the process of mass production of cable and wire products on the example of enameled wire. To analyze the results of direct control of the diameter of the wire in two-layer polyimide insulation in a continuous technological cycle. To submit to th...
Збережено в:
| Дата: | 2016 |
|---|---|
| Автор: | |
| Формат: | Стаття |
| Мова: | English Russian |
| Опубліковано: |
National Technical University "Kharkiv Polytechnic Institute" and State Institution “Institute of Technical Problems of Magnetism of the National Academy of Sciences of Ukraine”
2016
|
| Теми: | |
| Онлайн доступ: | http://eie.khpi.edu.ua/article/view/2074-272X.2016.5.07 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Electrical Engineering & Electromechanics |
Репозитарії
Electrical Engineering & Electromechanics| id |
eiekhpieduua-article-81025 |
|---|---|
| record_format |
ojs |
| spelling |
eiekhpieduua-article-810252017-08-21T18:31:00Z STATISTICAL PROCEDURES FOR TWO-SIDED LIMIT OF A CONTROLLED PARAMETER IN THE PROCESS OF PRODUCTION OF CABLE AND WIRE PRODUCTS СТАТИСТИЧЕСКИЕ ПРОЦЕДУРЫ ПРИ ДВУХСТОРОННЕМ ОГРАНИЧЕНИИ КОНТРОЛИРУЕМОГО ПАРАМЕТРА В ПРОЦЕССЕ ПРОИЗВОДСТВА КАБЕЛЬНО-ПРОВОДНИКОВОЙ ПРОДУКЦИИ СТАТИСТИЧЕСКИЕ ПРОЦЕДУРЫ ПРИ ДВУХСТОРОННЕМ ОГРАНИЧЕНИИ КОНТРОЛИРУЕМОГО ПАРАМЕТРА В ПРОЦЕССЕ ПРОИЗВОДСТВА КАБЕЛЬНО-ПРОВОДНИКОВОЙ ПРОДУКЦИИ Golik, O. V. enameled wire double polyimide insulation control card maximum probability of the parameter exit for the regulatory limit 621.315.2 эмальпровод двойная полиимидная изоляция контрольная карта максимальная вероятность выхода параметра за нормативный предел 621.315.2 емальдріт подвійна поліімідна ізоляція контрольна карта максимальна ймовірність виходу параметра за нормативну межу 621.315.2 Purpose. To consider issues of statistical control in the process of mass production of cable and wire products on the example of enameled wire. To analyze the results of direct control of the diameter of the wire in two-layer polyimide insulation in a continuous technological cycle. To submit to the control map of maximum probability of the exit diameter outside a specific range. To analyze the conditions under which maximum sensitivity of process control. Methodology. Study of the sensitivity of the control map of maximum probability of the exit option for regulatory of limit in the field deviations of the centered parameter close to zero. The existence of stable trends in the change of a controlled parameter can reduce the sensitivity of punishment to instability of the process. Results. To achieve maximum sensitivity of control of the technological frontier should be selected on the basis of the achieved level of the average value of the parameter and its statistical scattering. Process boundaries must be changed in accordance with the achieved level of the average value of the parameter and its statistical scattering. Such a change may serve as a quantitative indicator of trends in the increase or decrease in the reliability of the technological system. Originality. In particular the tasks of current control using engineering tolerances for controlled parameter are impractical. Control on Pmax should be directed to the exception of manufacturing, the parameters of which extend beyond the technical tolerances. Practical value. The exception is the manufacture of bulk cable products, the parameters of which extend beyond the technical tolerances. Рассмотрены вопросы статистического контроля в процессе производства массовой кабельно-проводниковой продукции на примере эмальпроводов. Получены результаты непосредственного контроля диаметра эмальпровода с полиимидной двухслойной изоляцией в непрерывном технологическом цикле. Представлена контрольная карта максимальной вероятности выхода диаметра за пределы определенного диапазона. Розглянуті питання статистичного контролю у процесі виробництва масової кабельно-провідникової продукції на прикладі емальпроводів. Отримані результати безпосереднього контролю діаметра емальдроту з поліімдною ізоляцією у неперервному технологічному циклі. Представлена контрольна карта максимальної ймовірності виходу діаметру за межі визначеного діапазону. National Technical University "Kharkiv Polytechnic Institute" and State Institution “Institute of Technical Problems of Magnetism of the National Academy of Sciences of Ukraine” 2016-10-31 Article Article application/pdf application/pdf http://eie.khpi.edu.ua/article/view/2074-272X.2016.5.07 10.20998/2074-272X.2016.5.07 Electrical Engineering & Electromechanics; No. 5 (2016); 47-50 Электротехника и Электромеханика; № 5 (2016); 47-50 Електротехніка і Електромеханіка; № 5 (2016); 47-50 2309-3404 2074-272X en ru http://eie.khpi.edu.ua/article/view/2074-272X.2016.5.07/77283 http://eie.khpi.edu.ua/article/view/2074-272X.2016.5.07/77284 Copyright (c) 2016 O. V. Golik https://creativecommons.org/licenses/by-nc/4.0 |
| institution |
Electrical Engineering & Electromechanics |
| collection |
OJS |
| language |
English Russian |
| topic |
enameled wire double polyimide insulation control card maximum probability of the parameter exit for the regulatory limit 621.315.2 эмальпровод двойная полиимидная изоляция контрольная карта максимальная вероятность выхода параметра за нормативный предел 621.315.2 емальдріт подвійна поліімідна ізоляція контрольна карта максимальна ймовірність виходу параметра за нормативну межу 621.315.2 |
| spellingShingle |
enameled wire double polyimide insulation control card maximum probability of the parameter exit for the regulatory limit 621.315.2 эмальпровод двойная полиимидная изоляция контрольная карта максимальная вероятность выхода параметра за нормативный предел 621.315.2 емальдріт подвійна поліімідна ізоляція контрольна карта максимальна ймовірність виходу параметра за нормативну межу 621.315.2 Golik, O. V. STATISTICAL PROCEDURES FOR TWO-SIDED LIMIT OF A CONTROLLED PARAMETER IN THE PROCESS OF PRODUCTION OF CABLE AND WIRE PRODUCTS |
| topic_facet |
enameled wire double polyimide insulation control card maximum probability of the parameter exit for the regulatory limit 621.315.2 эмальпровод двойная полиимидная изоляция контрольная карта максимальная вероятность выхода параметра за нормативный предел 621.315.2 емальдріт подвійна поліімідна ізоляція контрольна карта максимальна ймовірність виходу параметра за нормативну межу 621.315.2 |
| format |
Article |
| author |
Golik, O. V. |
| author_facet |
Golik, O. V. |
| author_sort |
Golik, O. V. |
| title |
STATISTICAL PROCEDURES FOR TWO-SIDED LIMIT OF A CONTROLLED PARAMETER IN THE PROCESS OF PRODUCTION OF CABLE AND WIRE PRODUCTS |
| title_short |
STATISTICAL PROCEDURES FOR TWO-SIDED LIMIT OF A CONTROLLED PARAMETER IN THE PROCESS OF PRODUCTION OF CABLE AND WIRE PRODUCTS |
| title_full |
STATISTICAL PROCEDURES FOR TWO-SIDED LIMIT OF A CONTROLLED PARAMETER IN THE PROCESS OF PRODUCTION OF CABLE AND WIRE PRODUCTS |
| title_fullStr |
STATISTICAL PROCEDURES FOR TWO-SIDED LIMIT OF A CONTROLLED PARAMETER IN THE PROCESS OF PRODUCTION OF CABLE AND WIRE PRODUCTS |
| title_full_unstemmed |
STATISTICAL PROCEDURES FOR TWO-SIDED LIMIT OF A CONTROLLED PARAMETER IN THE PROCESS OF PRODUCTION OF CABLE AND WIRE PRODUCTS |
| title_sort |
statistical procedures for two-sided limit of a controlled parameter in the process of production of cable and wire products |
| title_alt |
СТАТИСТИЧЕСКИЕ ПРОЦЕДУРЫ ПРИ ДВУХСТОРОННЕМ ОГРАНИЧЕНИИ КОНТРОЛИРУЕМОГО ПАРАМЕТРА В ПРОЦЕССЕ ПРОИЗВОДСТВА КАБЕЛЬНО-ПРОВОДНИКОВОЙ ПРОДУКЦИИ СТАТИСТИЧЕСКИЕ ПРОЦЕДУРЫ ПРИ ДВУХСТОРОННЕМ ОГРАНИЧЕНИИ КОНТРОЛИРУЕМОГО ПАРАМЕТРА В ПРОЦЕССЕ ПРОИЗВОДСТВА КАБЕЛЬНО-ПРОВОДНИКОВОЙ ПРОДУКЦИИ |
| description |
Purpose. To consider issues of statistical control in the process of mass production of cable and wire products on the example of enameled wire. To analyze the results of direct control of the diameter of the wire in two-layer polyimide insulation in a continuous technological cycle. To submit to the control map of maximum probability of the exit diameter outside a specific range. To analyze the conditions under which maximum sensitivity of process control. Methodology. Study of the sensitivity of the control map of maximum probability of the exit option for regulatory of limit in the field deviations of the centered parameter close to zero. The existence of stable trends in the change of a controlled parameter can reduce the sensitivity of punishment to instability of the process. Results. To achieve maximum sensitivity of control of the technological frontier should be selected on the basis of the achieved level of the average value of the parameter and its statistical scattering. Process boundaries must be changed in accordance with the achieved level of the average value of the parameter and its statistical scattering. Such a change may serve as a quantitative indicator of trends in the increase or decrease in the reliability of the technological system. Originality. In particular the tasks of current control using engineering tolerances for controlled parameter are impractical. Control on Pmax should be directed to the exception of manufacturing, the parameters of which extend beyond the technical tolerances. Practical value. The exception is the manufacture of bulk cable products, the parameters of which extend beyond the technical tolerances. |
| publisher |
National Technical University "Kharkiv Polytechnic Institute" and State Institution “Institute of Technical Problems of Magnetism of the National Academy of Sciences of Ukraine” |
| publishDate |
2016 |
| url |
http://eie.khpi.edu.ua/article/view/2074-272X.2016.5.07 |
| work_keys_str_mv |
AT golikov statisticalproceduresfortwosidedlimitofacontrolledparameterintheprocessofproductionofcableandwireproducts AT golikov statističeskieprocedurypridvuhstoronnemograničeniikontroliruemogoparametravprocesseproizvodstvakabelʹnoprovodnikovojprodukcii |
| first_indexed |
2024-06-01T14:38:37Z |
| last_indexed |
2024-06-01T14:38:37Z |
| _version_ |
1800669985793638400 |