Buchumschlag

AN INDUCTION SENSOR FOR MEASURING CURRENTS OF NANOSECOND RANGE

Purpose. A current meter based on the principle of electromagnetic induction is designed to register the current flowing in the rod lightning. The aim of the article is to describe the way of increasing the sensitivity of the converter by means of their serial communication. Methodology. The recorde...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2016
1. Verfasser:	Shalamov, S. P.
Format:	Artikel
Sprache:	Englisch Russisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2016
Schlagworte:	magnetic field strength corona current surge characteristic electromagnetic induction bi-exponential pulse induction transformer’s calibration distributed parameter line 621.3.022
Online Zugang:	http://eie.khpi.edu.ua/article/view/2074-272X.2016.5.09
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

POWERFUL GENERATORS OF HIGH-VOLTAGE PULSES WITH NANOSECOND FRONTS
von: Boyko, N. I.
Veröffentlicht: (2018)

CALCULATION OF THE EQUIVALENT ELECTRICAL PARAMETERS OF THE INDUCTOR OF INDUCTION CHANNEL FURNACE WITH DEFECTS IN ITS LINING
von: Podoltsev, A. D., et al.
Veröffentlicht: (2018)

AN INDUCTION INDUCTOR SYSTEM WITH A CIRCULAR TURN WITH A CUT BETWEEN TWO THIN-WALLED SHEET METALS
von: Gnatov, A. V.
Veröffentlicht: (2013)

A METHOD OF REDUCING THE ERROR IN DETERMINING THE ANGULAR DISPLACEMENTS WHEN USING INDUCTIVE SENSORS
von: Snitkov, K. I., et al.
Veröffentlicht: (2020)

Wavelet packet analysis for rotor bar breakage in an inverter induction motor
von: Abu Ibaid, O. Z. I., et al.
Veröffentlicht: (2023)

REFINED MODELLING OF INDUCTION MACHINES OF RENEWABLE ENERGY SYSTEMS WITH CHANGES IN THE DEGREE OF LOAD
von: Popovych , O., et al.
Veröffentlicht: (2025)

Plasma acceleration in the atmosphere by pulsed inductive thruster
von: Korytchenko, K. V., et al.
Veröffentlicht: (2024)

Variations of induction vector in North America
von: Babak, V., et al.
Veröffentlicht: (2014)

Electromechanical and thermophysical processes in the pulse induction accelerator of plasma formation
von: Korytchenko, K. V., et al.
Veröffentlicht: (2023)

The experience of comparing the variations of the induction vector in magnetically conjugate points
von: Rokityansky, I., et al.
Veröffentlicht: (2017)

Research of operating modes of conductors in power supply systems of cranes with induction feed, taking into account the influence of higher harmonics of the current
von: Andrienko, P. D., et al.
Veröffentlicht: (2021)

Annual, 11-year period and aperiodic variations of the induction vector by eight observatories of Intermagnet network
von: Ваbак, V. I., et al.
Veröffentlicht: (2017)

AIRGAP MAGNETIC INDUCTION DISTRIBUTION IN A COAXIALLY-LINEAR SYNCHRONOUS MOTOR WITH AXIAL AND RADIAL DIRECTION OF THE RUNNER PERMANENT MAGNETS MAGNETIZATION
von: Golenkov, G. M., et al.
Veröffentlicht: (2013)

Research for an enhanced fault-tolerant solution against the current sensor fault types in induction motor drives
von: Tran, C. D., et al.
Veröffentlicht: (2024)

INFLUENCE OF CORONARY DISCHARGE PARAMETERS ON THE EFFICIENCY OF LIGHTNING PROTECTION SYSTEM ELEMENTS
von: Chernukhin, A. Yu.
Veröffentlicht: (2017)

THE LAW OF ELECTROMAGNETIC INDUCTION
von: Kutkovetskyy, V. J.
Veröffentlicht: (2014)

DISTRIBUTION OF MAGNETIC INDUCTION LINEAR SYNCHRONUS MOTOR WITH MAGNETIC SUSPENSION
von: Golenkov, G. M., et al.
Veröffentlicht: (2013)

APPROXIMATE CALCULATION OF BASIC CHARACTERISTICS OF PLASMA AT THE AIR ELECTRIC EXPLOSION OF METAL CONDUCTOR
von: Baranov, M. I., et al.
Veröffentlicht: (2017)

IMPROVEMENT OF MICRODIPOLE MODEL OF BALL LIGHTNING AND ELECTRODYNAMIC DEVELOPMENT OF THEORY OF THIS PHENOMENON
von: Baranov, M. I.
Veröffentlicht: (2013)

THE DIAGNOSTICS OF INDUCTION MOTORS ROTOR BAR BREAKS BASED ON THE ANALYSIS OF ELECTROMOTIVE FORCE IN THE STATOR WINDINGS
von: Zagirnyak, M. V., et al.
Veröffentlicht: (2014)

PHYSIC BASIS OF ELECTROMAGNETIC INDUCTION LOW
von: Kutkovetskyy, V. J.
Veröffentlicht: (2015)

Indirect active and reactive powers control of doubly fed induction generator fed by three-level adaptive-network-based fuzzy inference system – pulse width modulation converter with a robust method based on super twisting algorithms
von: Benbouhenni, H., et al.
Veröffentlicht: (2021)

SOME RESULTS OF EXPERIMENTAL RESEARCH ON ARTIFICIAL BALL LIGHTNING LOW-ENERGY PLASMOIDS IN A HIGH-VOLTAGE LABORATORY
von: Baranov, M. I.
Veröffentlicht: (2013)

RESEARCH OF DYNAMIC CHARACTERISTICS OF INDUCTION MOTORS IN ELECTRIC DRIVES WITH MATCHING TRANSFORMER AND REDUCER
von: Petrushin, V. S., et al.
Veröffentlicht: (2019)

Theory and practice of numerical-field analysis and refinement of electromagnetic and energy parameters in the designs of three-phase induction motors
von: Milykh, V. I.
Veröffentlicht: (2026)

THE ROLE OF RADIO WAVE PROPAGATION EFFECTS IN THE SOLAR CORONA TO INTERPRET THE BEHIND-LIMB BURSTS
von: Stanislavsky, A. A.
Veröffentlicht: (2016)

Features on realization of measurement system for geophysical metrological vibration platform based on the laser digital interferometry
von: Kosyak, I. V., et al.
Veröffentlicht: (2015)

COAXIAL DISK SHUNT FOR MEASURING IN THE HEAVY-CURRENT CHAIN OF HIGH-VOLTAGE GENERATOR OF STORM DISCHARGES OF IMPULSES OF CURRENT OF ARTIFICIAL LIGHTNING WITH THE INTEGRAL OF ACTION TO 15•106 J/OHM
von: Baranov, M. I., et al.
Veröffentlicht: (2017)

ANALYSIS OF MUTUAL CAPACITANCE AND INDUCTANCE OF PRINTED CIRCUIT
von: Ivanov, V. G.
Veröffentlicht: (2014)

Influence of limiting the duration of the armature winding current on the operating indicators of a linear pulse electromechanical induction type converter
von: Bolyukh, V.F., et al.
Veröffentlicht: (2021)

Study of the piezoelectric sensor KD-35 properties on the calibration device by the method of external pulse and on a real Earth track
von: Shcherbina, S.V., et al.
Veröffentlicht: (2016)

APPROXIMATE CALCULATION OF ACTIVE RESISTANCE AND TEMPERATURE OF THE PULSE ELECTRIC ARC CHANNEL IN A HIGH-CURRENT DISCHARGE CIRCUIT OF A POWERFUL HIGH-VOLTAGE CAPACITOR ENERGY STORAGE
von: Baranov, M. I., et al.
Veröffentlicht: (2017)

Induction arrow spatial and temporal variations
von: Rokityansky, Igor, et al.
Veröffentlicht: (2024)

CALCULATION AND EXPERIMENTAL DETERMINATION OF CRITICAL SECTIONS OF ELECTRIC WIRES AND CABLES IN THE CIRCUITS OF DEVICES OF HIGH-VOLTAGE HIGH-CURRENT PULSE TECHNIQUE
von: Baranov, M. I.
Veröffentlicht: (2019)

Constructions of BiHom-X algebras and bimodules of some BiHom-dialgebras
von: Laraiedh, I., et al.
Veröffentlicht: (2023)

DESIGN RANGE CRITERIA IN DESIGNING OF CONTROLLED ASYNCHRONOUS MOTORS
von: Petrushin, V. S., et al.
Veröffentlicht: (2014)

Analysis of operating modes of a stand-alone wind turbine with induction generator using pulse converter for charging batteries based on simulation
von: Holovko, V., et al.
Veröffentlicht: (2017)

REACTIVE CURRENT OF AN INDUCTION ELECTRIC DRIVES WITH THYRISTOR VOLTAGE REGULATOR
von: Kovalova, J. V.
Veröffentlicht: (2014)

A mathematical model of an induction motor with the stator and rotor unsymmetry
von: Chaban, V. Y., et al.
Veröffentlicht: (2012)

COMPARATIVE ANALYSIS OF ELECTRICAL AND THERMAL CONTROL OF THE LINING STATE OF INDUCTION APPARATUS OF COPPER WIRE MANUFACTURE
von: Zolotaryov, V. M., et al.
Veröffentlicht: (2018)