STRUCTURAL SYNTHESIS OF A STABILIZING ROBUST CONTROLLER OF THE ROTOR FLUX LINKAGE
Purpose. The aim is to structural synthesis of robust stabilizing control of the rotor flux vector control system of induction motor. Methodology. Synthesis controller structure was carried out in two stages. The first stage constructed a mathematical model of the channel of the rotor flux with para...
Saved in:
| Date: | 2017 |
|---|---|
| Main Authors: | Khlopenko, N. J., Khlopenko, I. N. |
| Format: | Article |
| Language: | English Russian |
| Published: |
National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine
2017
|
| Subjects: | |
| Online Access: | http://eie.khpi.edu.ua/article/view/2074-272X.2017.1.04 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Electrical Engineering & Electromechanics |
Institution
Electrical Engineering & ElectromechanicsSimilar Items
ANALYSIS AND VERIFICATION OF THE OPERATION OF THE STABILIZING ROBUST CONTROLLER'S ELECTRICAL CIRCUIT OF THE ROTOR FLUX-LINKAGE CONTROL SYSTEM
by: Khlopenko, I. N., et al.
Published: (2020)
by: Khlopenko, I. N., et al.
Published: (2020)
STABILITY AND ACCURACY OF THE ROBUST SYSTEM FOR STABILIZING THE ROTOR FLUX-LINKAGE OF AN ASYNCHRONOUS ELECTRIC DRIVE AT RANDOM VARIATIONS OF THE UNCERTAIN PARAMETERS WITHIN THE SPECIFIED BOUNDARIES
by: Khlopenko, I. N., et al.
Published: (2018)
by: Khlopenko, I. N., et al.
Published: (2018)
STABILIZATION OF PARAMETERS OF ASYNCHRONOUS ELECTRIC DRIVE WITH VECTOR CONTROL
by: Khlopenko, N. J., et al.
Published: (2015)
by: Khlopenko, N. J., et al.
Published: (2015)
CALCULATION AND DESIGN OF A ROBUST SPEED CONTROLLER OF A FREQUENCY-CONTROLLED INDUCTION ELECTRIC DRIVE
by: Khlopenko, N. J.
Published: (2020)
by: Khlopenko, N. J.
Published: (2020)
Автоматична оптимізація виконання для задачі метеорологічного прогнозування
by: Doroshenko, A.Yu., et al.
Published: (2015)
by: Doroshenko, A.Yu., et al.
Published: (2015)
Creation of an Internet portal providing meteorological forecasting services on multiprocessor platform
by: Doroshenko, А.Yu., et al.
Published: (2017)
by: Doroshenko, А.Yu., et al.
Published: (2017)
Autotuner and visualization for meteorological forecasting model
by: Ivanenko, P.A., et al.
Published: (2025)
by: Ivanenko, P.A., et al.
Published: (2025)
Neurocontrol Methods: A Survey
by: Chernodub, A.N., et al.
Published: (2025)
by: Chernodub, A.N., et al.
Published: (2025)
Mathematical modeling in problem of searching optimal control of alloys obtaining for machine parts under uncertainty conditions
by: Demin, Dmitriy
Published: (2014)
by: Demin, Dmitriy
Published: (2014)
Mathematical modeling in problem of searching optimal control of alloys obtaining for machine parts under uncertainty conditions
by: Demin, Dmitriy
Published: (2014)
by: Demin, Dmitriy
Published: (2014)
Sensorless control of switched reluctance motor based on a simple flux linkage model
by: Fan, J., et al.
Published: (2023)
by: Fan, J., et al.
Published: (2023)
Mathematical modelling of transients in the electric drive of the turnout of the mono-sleeper type with switched-inductor motor
by: Buriakovskyi, S. G., et al.
Published: (2021)
by: Buriakovskyi, S. G., et al.
Published: (2021)
Performance enhancement of direct torque control induction motor drive using space vector modulation strategy
by: Moussaoui, L.
Published: (2022)
by: Moussaoui, L.
Published: (2022)
Improved speed sensorless control for induction motor drives using rotor flux angle estimation
by: Tran, C. D., et al.
Published: (2025)
by: Tran, C. D., et al.
Published: (2025)
Development and study of a microprocessor automatic control system for a mono-switch tie type with a linear inductive electric motor and a discrete speed controller
by: Buriakovskyi, S. G., et al.
Published: (2022)
by: Buriakovskyi, S. G., et al.
Published: (2022)
Fractional-based iterative learning-optimal model predictive control of speed induction motor regulation for electric vehicles application
by: Nemouchi, B., et al.
Published: (2024)
by: Nemouchi, B., et al.
Published: (2024)
A robust control design approach for altitude control and trajectory tracking of a quadrotor
by: Gulshan, Z. A., et al.
Published: (2021)
by: Gulshan, Z. A., et al.
Published: (2021)
STATISTICAL OPTIMIZATION OF FREQUENCY REGULATED INDUCTION ELECTRIC DRIVES WITH SCALAR CONTROL
by: Shurub, Yu. V.
Published: (2017)
by: Shurub, Yu. V.
Published: (2017)
SYNTHESIS AND ANALYSIS OF ARC FURNACE ELECTRICAL MODE CONTROL SYSTEM ON THE BASIS OF THREE-DIMENSIONAL PHASE CURRENTS VECTOR DISTRIBUTION
by: Lozynskyi, O. Y., et al.
Published: (2019)
by: Lozynskyi, O. Y., et al.
Published: (2019)
MULTIOBJECTIVE SYNTHESIS OF ROBUST CONTROL BY MULTIMASS ELECTROMECHANICAL SYSTEMS BASED ON PARETO-OPTIMAL SOLUTION
by: Nikitina, T. B.
Published: (2015)
by: Nikitina, T. B.
Published: (2015)
Simulation and genetic optimization of control systems by LabVIEW programming
by: Zherebko, V.A., et al.
Published: (2018)
by: Zherebko, V.A., et al.
Published: (2018)
Axial flux machine with non-slotted torus-ns rotor type. Design and investigate for electric traction
by: Larbi, B., et al.
Published: (2023)
by: Larbi, B., et al.
Published: (2023)
CAST-FILM POLYMER COMPOSITION DOSING SYSTEM DRIVE CONTROL
by: Kulinchenko, G. V., et al.
Published: (2014)
by: Kulinchenko, G. V., et al.
Published: (2014)
Inverter fuzzy speed control of multi-machine system series-connected fed by a single five-phase an asymmetrical 19-level inverter with less number of switches
by: Bessaad, T., et al.
Published: (2025)
by: Bessaad, T., et al.
Published: (2025)
Hybrid autotuning model with statistic modelling
by: Doroshenko, А.Yu., et al.
Published: (2018)
by: Doroshenko, А.Yu., et al.
Published: (2018)
SLIDING MODE CONTROL OF THE DFIG USED IN WIND ENERGY SYSTEM
by: Glaoui, Hachemi, et al.
Published: (2018)
by: Glaoui, Hachemi, et al.
Published: (2018)
SYNTHESIS OF NEURAL NETWORK MODEL REFERENCE CONTROLLER FOR AIMING AND STABILIZING SYSTEM
by: Kuznetsov, B. I., et al.
Published: (2015)
by: Kuznetsov, B. I., et al.
Published: (2015)
Robust fault-tolerant sliding mode control and advanced fault diagnosis for doubly-fed induction generators
by: Hamdi, N., et al.
Published: (2025)
by: Hamdi, N., et al.
Published: (2025)
The method of multi objective synthesis of stochastic robust control by multimass electromechanical systems under non-gausian random external disturbances
by: Kuznetsov, B. I., et al.
Published: (2022)
by: Kuznetsov, B. I., et al.
Published: (2022)
ENERGY STORAGE SYSTEMS APPLICATION FOR OPERATION MANAGEMENT PROBLEMS IN ELECTRIC POWER SYSTEM OF UKRAINE. STATUS AND DEVELOPMENT PROSPECTS
by: Bolotnyi, N., et al.
Published: (2022)
by: Bolotnyi, N., et al.
Published: (2022)
Finite-time robust position tracking control for DC motors under uncertain dynamics
by: Nguyen, Q. B., et al.
Published: (2026)
by: Nguyen, Q. B., et al.
Published: (2026)
OPTIMAL CONTROL OF THE ELECTRIC SHIPS’ PROPULSION MOTORS DURING REVERSAL
by: Yarovenko, V. A., et al.
Published: (2018)
by: Yarovenko, V. A., et al.
Published: (2018)
STRUCTURAL-PARAMETRIC SYNTHESIS OF ROLLING MILLS MULTI-MOTOR ELECTRIC DRIVES
by: Kuznetsov, B. I., et al.
Published: (2020)
by: Kuznetsov, B. I., et al.
Published: (2020)
CONTROL OF ELECTRIC SHIPS’ PROPULSION MOTORS WHEN MOVING ON CURVILINEAR TRAJECTORY
by: Yarovenko, V. A., et al.
Published: (2020)
by: Yarovenko, V. A., et al.
Published: (2020)
Intelligent fuzzy back-stepping observer design based induction motor robust nonlinear sensorless control
by: Abed, K., et al.
Published: (2024)
by: Abed, K., et al.
Published: (2024)
The method of limitation of dynamic loads of nonlinear electromechanical systems under state vector robust control
by: Kuznetsov, B. I., et al.
Published: (2022)
by: Kuznetsov, B. I., et al.
Published: (2022)
NEURO-SYSTEM OF AIMING AND STABILIZING WITH A REGULATOR ON THE BASIS OF STANDARD MODEL MODEL REFERENCE CONTROLLER
by: Kuznetsov, B. I., et al.
Published: (2015)
by: Kuznetsov, B. I., et al.
Published: (2015)
SYNTHESIS OF A TWO-MASS ELECTRIC DRIVE WITH AN ASTATIC SYSTEM OF SUBORDINATE REGULATION AT THE ACTION OF VARIABLE FRICTION FORCES
by: Zadorozhniaia, I. N., et al.
Published: (2018)
by: Zadorozhniaia, I. N., et al.
Published: (2018)
Mathematical modeling in the problem of selecting opti-mal control of obtaining alloys for machine parts in un-certainty conditions
by: Дёмин, Дмитрий Александрович
Published: (2015)
by: Дёмин, Дмитрий Александрович
Published: (2015)
Mathematical modeling in the problem of selecting opti-mal control of obtaining alloys for machine parts in un-certainty conditions
by: Дёмин, Дмитрий Александрович
Published: (2015)
by: Дёмин, Дмитрий Александрович
Published: (2015)
Similar Items
-
ANALYSIS AND VERIFICATION OF THE OPERATION OF THE STABILIZING ROBUST CONTROLLER'S ELECTRICAL CIRCUIT OF THE ROTOR FLUX-LINKAGE CONTROL SYSTEM
by: Khlopenko, I. N., et al.
Published: (2020) -
STABILITY AND ACCURACY OF THE ROBUST SYSTEM FOR STABILIZING THE ROTOR FLUX-LINKAGE OF AN ASYNCHRONOUS ELECTRIC DRIVE AT RANDOM VARIATIONS OF THE UNCERTAIN PARAMETERS WITHIN THE SPECIFIED BOUNDARIES
by: Khlopenko, I. N., et al.
Published: (2018) -
STABILIZATION OF PARAMETERS OF ASYNCHRONOUS ELECTRIC DRIVE WITH VECTOR CONTROL
by: Khlopenko, N. J., et al.
Published: (2015) -
CALCULATION AND DESIGN OF A ROBUST SPEED CONTROLLER OF A FREQUENCY-CONTROLLED INDUCTION ELECTRIC DRIVE
by: Khlopenko, N. J.
Published: (2020) -
Автоматична оптимізація виконання для задачі метеорологічного прогнозування
by: Doroshenko, A.Yu., et al.
Published: (2015)