Compact-sized excimer laser with two-side preionization

Compact-sized monopulse excimer laser with the foot-print equal to only 250×80 mm, total height 250 mm and beam axis height 50 mm was designed. Output energy at the wavelength 308 nm (XeCl* mixture) is 5 mJ, maximal repetition rate – 1-2 pulses per second, beam divergence – 8 milliradians. The...

Повний опис

Збережено в:
Бібліографічні деталі
Видавець:Інститут фізики напівпровідників імені В.Є. Лашкарьова НАН України
Дата:2010
Автори: Baschenko, S.M., Marchenko, L.S.
Формат: Стаття
Мова:English
Опубліковано: Інститут фізики напівпровідників імені В.Є. Лашкарьова НАН України 2010
Назва видання:Semiconductor Physics Quantum Electronics & Optoelectronics
Онлайн доступ:http://dspace.nbuv.gov.ua/handle/123456789/118566
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Цитувати:Compact-sized excimer laser with two-side preionization / S.M. Baschenko, L.S. Marchenko // Semiconductor Physics Quantum Electronics & Optoelectronics. — 2010. — Т. 13, № 4. — С. 426-427. — Бібліогр.: 3 назв. — англ.

Репозиторії

Digital Library of Periodicals of National Academy of Sciences of Ukraine
Опис
Резюме:Compact-sized monopulse excimer laser with the foot-print equal to only 250×80 mm, total height 250 mm and beam axis height 50 mm was designed. Output energy at the wavelength 308 nm (XeCl* mixture) is 5 mJ, maximal repetition rate – 1-2 pulses per second, beam divergence – 8 milliradians. The small foot-print, small axis height of beam in combination with low weight of laser (5 kg) allow this laser to be used in various optical schemes, where traditional, typical bulky ecximer lasers are unapplicable. Moreover, small dimensions, low weight in combination with low energy consumption (a few watts) allow them to be used in clear “field” conditions. Beside abovementioned characteristics, the designed laser differs from the traditional ones by two-side preionization that has a “spark” character near the “hot” massive electrode and the so-called “capacitive” or “barrier” one under the ground grid. This two-side preionization provides both igniting and sustaining of wider discharge thus allowing to reach beam with higher symmetry – its cross-section is 15×20 mm².