The influence of current density of deposition on Zn–Ni coatings properties
Zn–Ni coatings were deposited under galvanostatic conditions at current density in the range of 20 to 60 mA⋅cm⁻². The influence of current density of deposition on the surface morphology, chemical and phase composition and corrosion resistance was investigated. Structural investigations were perform...
Збережено в:
Видавець: | Фізико-механічний інститут ім. Г.В. Карпенка НАН України |
---|---|
Дата: | 2011 |
Автори: | , , , , |
Формат: | Стаття |
Мова: | English |
Опубліковано: |
Фізико-механічний інститут ім. Г.В. Карпенка НАН України
2011
|
Назва видання: | Фізико-хімічна механіка матеріалів |
Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/138346 |
Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
Цитувати: | The influence of current density of deposition on Zn–Ni coatings properties / K. Wykpis, M. Popczyk, J. Niedbała, A. Budniok, E. Łągiewka // Фізико-хімічна механіка матеріалів. — 2011. — Т. 47, № 6. — С.107-114. — Бібліогр.: 12 назв. — англ. |