Predictive Performance of Artificial Neural Network and Multiple Linear Regression Models in Predicting Adhesive Bonding Strength of Wood

The purpose of this study was to develop artificial neural network (ANN) and multiple linear regression (MLR) models that arecapable of predicting the bonding strength of wood base on moisture content, open assembly time and closed assembly time of the joints prior to pressing process. For this purp...

Повний опис

Збережено в:
Бібліографічні деталі
Дата:2016
Автори: Bardak, S., Tiryaki, S., Bardak, T., Aydin A.
Формат: Стаття
Мова:English
Опубліковано: Інститут проблем міцності ім. Г.С. Писаренко НАН України 2016
Назва видання:Проблемы прочности
Теми:
Онлайн доступ:http://dspace.nbuv.gov.ua/handle/123456789/173559
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:Digital Library of Periodicals of National Academy of Sciences of Ukraine
Цитувати:Predictive Performance of Artificial Neural Network and Multiple Linear Regression Models in Predicting Adhesive Bonding Strength of Wood / S. Bardak, S. Tiryaki, T. Bardak, A. Aydin // Проблемы прочности. — 2016. — № 6. — С. 95-110. — Бібліогр.: 45 назв. — англ.

Репозитарії

Digital Library of Periodicals of National Academy of Sciences of Ukraine
Опис
Резюме:The purpose of this study was to develop artificial neural network (ANN) and multiple linear regression (MLR) models that arecapable of predicting the bonding strength of wood base on moisture content, open assembly time and closed assembly time of the joints prior to pressing process. For this purpose, the experimental studies were conducted and the models basedon experimental results were set up. As a result of the experiments conducted, it was observed that bonding strength first increased and then decreased with increasing the wood moisture content and adhesive open assembly time. In addition, the increased closed assembly time caused a decrease in bonding strength of wood. The ANN results were compared with the results obtained from the MLR modelto evaluate the models’ predictive performance. It was found that the ANN model with the R² value of 97.7% and the mean absolute percentage error of 3.587% in test phase exhibits higher prediction accuracy than the MLR model. The comparison results confirm the feasibility of ANN model in terms of predictive performance. Consequently, it can be said that ANN is an effective tool in predicting wood bonding strength, and quite useful instead of costly and time-consuming experimental investigations.