Strengthening of pipe tools for cold roller rolling of corrosion-resistant pipes by application of amorphous alloys

• Дата: 2021
• Автори: Krivchik, L., Khokhlova, T., Pinchuk, V., Holovachov, А., Srebryansky, G., Nosenko, V., Zagorodniy, O.
• Формат: Стаття
• Мова: English
• Опубліковано: Національний науковий центр «Харківський фізико-технічний інститут» НАН України 2021
• Назва видання: Вопросы атомной науки и техники
• Теми: Physics of radiation and ion-plasma technologies
• Онлайн доступ: http://dspace.nbuv.gov.ua/handle/123456789/195451
• Назва журналу: Digital Library of Periodicals of National Academy of Sciences of Ukraine
• Цитувати: Strengthening of pipe tools for cold roller rolling of corrosion-resistant pipes by application of amorphous alloys / Lilia Krivchik, Tatiana Khokhlova, Victoria Pinchuk, Аrtem Holovachov, Grigory Srebryansky, Victor Nosenko, Oleksiy Zagorodniy // Problems of Atomic Science and Technology. — 2021. — № 5. — С. 131-138. — Бібліогр.: 30 назв. — англ.

In the production of pipes from corrosion-resistant steels on pipe rolling plants, the current problem is the low stability of the pipe tool. Therefore, the creation of high-performance and durable tools is associated primarily with the production and processing of materials that could withstand harsh working conditions. The technology of heat hardening of the pipe tool for cold roller rolling of corrosion-resistant pipes (rollers and support laths of HPTR mills) from 4Х5МФ1С steel which excludes the third holiday and uses drawing of a covering from powders of amorphous alloys 100…150 µm thick is offered in the work. As a result of the offered technology durability, wear resistance, and also hardness to HV0.1 950–1050 (in comparison with HV 587–690 on existing technology of heat treatment in factory conditions) increases. A wide range of studies of the structure of the coating and industrial tests of rollers and support bars. It is shown that gas-plasma coating of amorphous alloy based on Fe–Si–B system increases the hardness of the tool surface by 1.3–1.6 times and their stability by ~ 30…50%.