Structure and stress state of TiN and Ti₀.₅₋xAl₀.₅YxN coatings prepared by the PIII&D technique from filtered vacuum-arc plasma

The results of investigations of the structure and stress state of TiN and Ti₀.₅₋xAl₀.₅YxN coatings deposited from the filtered vacuum-arc plasma under high voltage pulsed bias potential on the substrate are presented. It was found that axial texture [110] is formed in coatings when pulses potential...

Повний опис

Збережено в:
Бібліографічні деталі
Видавець:Національний науковий центр «Харківський фізико-технічний інститут» НАН України
Дата:2014
Автор: Reshetnyak, E.N.
Формат: Стаття
Мова:English
Опубліковано: Національний науковий центр «Харківський фізико-технічний інститут» НАН України 2014
Назва видання:Вопросы атомной науки и техники
Теми:
Онлайн доступ:http://dspace.nbuv.gov.ua/handle/123456789/79928
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Цитувати:Structure and stress state of TiN and Ti₀.₅₋xAl₀.₅YxN coatings prepared by the PIII&D technique from filtered vacuum-arc plasma/ E.N. Reshetnyak // Вопросы атомной науки и техники. — 2014. — № 1. — С. 159-162. — Бібліогр.: 17 назв. — анг.

Репозиторії

Digital Library of Periodicals of National Academy of Sciences of Ukraine
id irk-123456789-79928
record_format dspace
spelling irk-123456789-799282015-04-10T03:02:02Z Structure and stress state of TiN and Ti₀.₅₋xAl₀.₅YxN coatings prepared by the PIII&D technique from filtered vacuum-arc plasma Reshetnyak, E.N. Физика и технология конструкционных материалов The results of investigations of the structure and stress state of TiN and Ti₀.₅₋xAl₀.₅YxN coatings deposited from the filtered vacuum-arc plasma under high voltage pulsed bias potential on the substrate are presented. It was found that axial texture [110] is formed in coatings when pulses potential with an amplitude 0.5…2.5 kV are applied. For TiN coatings with increasing amplitude of the potential the perfection of texture is increased and the level of residual compressive stress is decreased. As for Ti₀.₅₋xAl₀.₅YxN coatings with increasing amplitude the stress level is increased. In this case the texture is most strong outlined at the amplitude of 1 kV. With further increase in the amplitude the texture perfection becomes weaker. Differences of structure and stress state may occur due to the possibility of phase transition for multi-component coatings Ti-Al-Y-N associated with the decay of the supersaturated solid solution (Ti,Al)N stimulated by high energy ion bombardment. Приведены результаты исследований структуры и напряженного состояния TiN- и Ti₀.₅₋xAl₀.₅YxN-покрытий, полученных из фильтрованной вакуумно-дуговой плазмы при подаче высоковольтного импульсного потенциала смещения на подложку. Обнаружено, что при амплитуде импульсного потенциала 0,5…2,5 кВ в покрытиях формируется аксиальная текстура [110]. Для TiN-покрытий с ростом амплитуды степень совершенства текстуры растет, а уровень остаточных напряжений сжатия падает. Для покрытий Ti₀.₅₋xAl₀.₅YxN с ростом амплитуды уровень напряжений увеличивается. При этом наиболее совершенная текстура наблюдается при амплитуде 1 кВ. При дальнейшем увеличении амплитуды степень совершенства текстуры уменьшается. Различия структуры и напряженного состояния покрытий могут быть обусловлены возможностью фазового перехода в многокомпонентных покрытиях Ti-Al-Y-N, связанного с распадом пересыщенного твердого раствора (Ti, Al)N под действием высокоэнергетичной ионной бомбардировки Наведено результати досліджень структури і напруженого стану TiN- та Ti₀.₅₋xAl₀.₅YxN-покриттів, отриманих з фільтрованої вакуумно-дугової плазми при подачі високовольтного імпульсного потенціалу зміщення на підкладку. Виявлено, що при амплітуді імпульсного потенціалу 0,5…2,5 кВ у покриттях формується аксіальна текстура [110]. Для TiN-покриттів із зростанням амплітуди потенціалу ступінь досконалості текстури зростає, а рівень залишкових напружень стиснення падає. Для покриттів Ti₀.₅₋xAl₀.₅YxN із зростанням амплітуди рівень напружень збільшується. При цьому найбільш досконала текстура спостерігається при амплітуді 1 кВ. При подальшому збільшенні амплітуди ступінь досконалості текстури зменшується. Відмінності структури і напруженого стану покриттів можуть бути обумовлені можливістю фазового переходу в багатокомпонентних покриттях Ti-Al-Y-N, пов'язаного з розпадом пересиченого твердого розчину (Ti, Al)N під впливом високоенергетичного іонного бомбардування. 2014 Article Structure and stress state of TiN and Ti₀.₅₋xAl₀.₅YxN coatings prepared by the PIII&D technique from filtered vacuum-arc plasma/ E.N. Reshetnyak // Вопросы атомной науки и техники. — 2014. — № 1. — С. 159-162. — Бібліогр.: 17 назв. — анг. 1562-6016 http://dspace.nbuv.gov.ua/handle/123456789/79928 621.793: 548.73 en Вопросы атомной науки и техники Національний науковий центр «Харківський фізико-технічний інститут» НАН України
institution Digital Library of Periodicals of National Academy of Sciences of Ukraine
collection DSpace DC
language English
topic Физика и технология конструкционных материалов
Физика и технология конструкционных материалов
spellingShingle Физика и технология конструкционных материалов
Физика и технология конструкционных материалов
Reshetnyak, E.N.
Structure and stress state of TiN and Ti₀.₅₋xAl₀.₅YxN coatings prepared by the PIII&D technique from filtered vacuum-arc plasma
Вопросы атомной науки и техники
description The results of investigations of the structure and stress state of TiN and Ti₀.₅₋xAl₀.₅YxN coatings deposited from the filtered vacuum-arc plasma under high voltage pulsed bias potential on the substrate are presented. It was found that axial texture [110] is formed in coatings when pulses potential with an amplitude 0.5…2.5 kV are applied. For TiN coatings with increasing amplitude of the potential the perfection of texture is increased and the level of residual compressive stress is decreased. As for Ti₀.₅₋xAl₀.₅YxN coatings with increasing amplitude the stress level is increased. In this case the texture is most strong outlined at the amplitude of 1 kV. With further increase in the amplitude the texture perfection becomes weaker. Differences of structure and stress state may occur due to the possibility of phase transition for multi-component coatings Ti-Al-Y-N associated with the decay of the supersaturated solid solution (Ti,Al)N stimulated by high energy ion bombardment.
format Article
author Reshetnyak, E.N.
author_facet Reshetnyak, E.N.
author_sort Reshetnyak, E.N.
title Structure and stress state of TiN and Ti₀.₅₋xAl₀.₅YxN coatings prepared by the PIII&D technique from filtered vacuum-arc plasma
title_short Structure and stress state of TiN and Ti₀.₅₋xAl₀.₅YxN coatings prepared by the PIII&D technique from filtered vacuum-arc plasma
title_full Structure and stress state of TiN and Ti₀.₅₋xAl₀.₅YxN coatings prepared by the PIII&D technique from filtered vacuum-arc plasma
title_fullStr Structure and stress state of TiN and Ti₀.₅₋xAl₀.₅YxN coatings prepared by the PIII&D technique from filtered vacuum-arc plasma
title_full_unstemmed Structure and stress state of TiN and Ti₀.₅₋xAl₀.₅YxN coatings prepared by the PIII&D technique from filtered vacuum-arc plasma
title_sort structure and stress state of tin and ti₀.₅₋xal₀.₅yxn coatings prepared by the piii&d technique from filtered vacuum-arc plasma
publisher Національний науковий центр «Харківський фізико-технічний інститут» НАН України
publishDate 2014
topic_facet Физика и технология конструкционных материалов
url http://dspace.nbuv.gov.ua/handle/123456789/79928
citation_txt Structure and stress state of TiN and Ti₀.₅₋xAl₀.₅YxN coatings prepared by the PIII&D technique from filtered vacuum-arc plasma/ E.N. Reshetnyak // Вопросы атомной науки и техники. — 2014. — № 1. — С. 159-162. — Бібліогр.: 17 назв. — анг.
series Вопросы атомной науки и техники
work_keys_str_mv AT reshetnyaken structureandstressstateoftinandti05xal05yxncoatingspreparedbythepiiidtechniquefromfilteredvacuumarcplasma
first_indexed 2023-10-18T19:19:48Z
last_indexed 2023-10-18T19:19:48Z
_version_ 1796146622092017664