К-325-23,5 Steam Turbine High-Pressure Rotor Thermal and Thermo-structural State during cold start-up
The high-pressure turbine rotor is the most critical and costly steam turbine component. Service experience for the machines with a power of 150 MW and more shows that cracks appear in the region of regulation stage fillets and end seals in high-pressure turbine rotors. The cause of this effect can...
Saved in:
| Date: | 2017 |
|---|---|
| Main Authors: | Бахмутская, Ю. О., Голощапов, В. Н. |
| Format: | Article |
| Language: | Russian |
| Published: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2017
|
| Subjects: | |
| Online Access: | https://journals.uran.ua/jme/article/view/105599 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Journal of Mechanical Engineering |
Institution
Journal of Mechanical EngineeringSimilar Items
К-325-23,5 Steam Turbine High-Pressure Rotor Thermal and Thermo-structural State during cold start-up
by: Бахмутская, Ю. О., et al.
Published: (2017)
by: Бахмутская, Ю. О., et al.
Published: (2017)
K-325-23,5 steam turbine high-pressure rotor thermal and thermo-structural state during cold start-up
by: Ju. O. Bakhmutskaja, et al.
Published: (2017)
by: Ju. O. Bakhmutskaja, et al.
Published: (2017)
Thermal state of the rotor winding of the turbogenerator with direct hydrogen cooling
by: Кобзарь, К. А., et al.
Published: (2015)
by: Кобзарь, К. А., et al.
Published: (2015)
Thermal state of the rotor winding of the turbogenerator with direct hydrogen cooling
by: Кобзарь, К. А., et al.
Published: (2015)
by: Кобзарь, К. А., et al.
Published: (2015)
Thermal and Stress State of the Steam Turbine Control Valve Casing, with the Turbine Operation in the Stationary Modes
by: Koliadiuk, Andrii S., et al.
Published: (2019)
by: Koliadiuk, Andrii S., et al.
Published: (2019)
Thermal and Stress State of the Steam Turbine Control Valve Casing, with the Turbine Operation in the Stationary Modes
by: Koliadiuk, Andrii S., et al.
Published: (2019)
by: Koliadiuk, Andrii S., et al.
Published: (2019)
Recognition of emergency situations of large hydrogenerators and turbogenerators by multi factors analysis of complicated stressed states of units and component parts
by: Вакуленко, А. Н., et al.
Published: (2015)
by: Вакуленко, А. Н., et al.
Published: (2015)
Recognition of emergency situations of large hydrogenerators and turbogenerators by multi factors analysis of complicated stressed states of units and component parts
by: Вакуленко, А. Н., et al.
Published: (2015)
by: Вакуленко, А. Н., et al.
Published: (2015)
Thermostressed State of the Lock Joint of Turbine Rotor Blades of the First Stage of К-500-240 Steam Turbine Medium Pressure Cylinder
by: Palkov, Ihor A., et al.
Published: (2019)
by: Palkov, Ihor A., et al.
Published: (2019)
Thermostressed State of the Lock Joint of Turbine Rotor Blades of the First Stage of К-500-240 Steam Turbine Medium Pressure Cylinder
by: Palkov, Ihor A., et al.
Published: (2019)
by: Palkov, Ihor A., et al.
Published: (2019)
Development Thermal state of the rotor of the turbogenerator with direct hydrogen cooling
by: Овсянникова, Е. А.
Published: (2017)
by: Овсянникова, Е. А.
Published: (2017)
Development Thermal state of the rotor of the turbogenerator with direct hydrogen cooling
by: Овсянникова, Е. А.
Published: (2017)
by: Овсянникова, Е. А.
Published: (2017)
Performance analysis of a new LP stage located upstream the extraction point in a 225 MW turbine
by: Шиманяк, М., et al.
Published: (2016)
by: Шиманяк, М., et al.
Published: (2016)
Performance analysis of a new LP stage located upstream the extraction point in a 225 MW turbine
by: Шиманяк, М., et al.
Published: (2016)
by: Шиманяк, М., et al.
Published: (2016)
Elastic Stress-Strain State of Elements of the Internal High-Pressure Casing for Steam Turbines
by: Palkov, Serhii A., et al.
Published: (2019)
by: Palkov, Serhii A., et al.
Published: (2019)
Elastic Stress-Strain State of Elements of the Internal High-Pressure Casing for Steam Turbines
by: Palkov, Serhii A., et al.
Published: (2019)
by: Palkov, Serhii A., et al.
Published: (2019)
DEVELOPMENT OF A MATHEMATICAL MODEL FOR A FREQUENCY-CONTROLLED ASYNCHRONOUS MOTOR ROTOR TEMPERATURE FIELD ON THE BASIS OF DIFFERENTIAL EQUATIONS OF HEAT CONDUCTION
by: Ostashevskiy, N. A., et al.
Published: (2013)
by: Ostashevskiy, N. A., et al.
Published: (2013)
Тепловое и термонапряженное состояния ротора высокого давления турбины К-325-23,5 при пуске из холодного состояния
by: Бахмутская, Ю.О., et al.
Published: (2017)
by: Бахмутская, Ю.О., et al.
Published: (2017)
Thermal and Stress-Strain State of Cast Bodies of Control Valves of 200 MW Power Units
by: Chernousenko, O. Yu., et al.
Published: (2020)
by: Chernousenko, O. Yu., et al.
Published: (2020)
Thermal and Stress-Strain State of Cast Bodies of Control Valves of 200 MW Power Units
by: Chernousenko, O. Yu., et al.
Published: (2020)
by: Chernousenko, O. Yu., et al.
Published: (2020)
Features of prolongation of the service life of high- and intermediate-pressure rotors of K-200-130 steam turbine of Luhansk TPP
by: Chernousenko O.Yu., et al.
Published: (2018)
by: Chernousenko O.Yu., et al.
Published: (2018)
Fractal model of estimating quality of cold worked fuel cladding tubes
by: Vakhrusheva, V.S., et al.
Published: (2021)
by: Vakhrusheva, V.S., et al.
Published: (2021)
TWO-DIMENSIONAL MODEL OF THE SOLID FUEL GASIFICATION IN A FIXED BED UNDER PRESSER. 1. INVESTIGATION OF SHUBARKOL COAL CONVERSION IN A STEAM-OXYGEN MIXTURE WITH THE MASS PART OF H2О/O2=45/55
by: Rokhman, B.
Published: (2019)
by: Rokhman, B.
Published: (2019)
Mathematical modeling of rheostat-reactor start of wound-rotor induction motors
by: Malyar, V. S., et al.
Published: (2022)
by: Malyar, V. S., et al.
Published: (2022)
The problems and prospects of thermal-pump technologies development in Ukraine
by: Kulyk М.M., et al.
Published: (2006)
by: Kulyk М.M., et al.
Published: (2006)
Stress-Strain State of Steam Turbine Lock Joint under Plastic Deformation
by: Palkov, Ihor A., et al.
Published: (2021)
by: Palkov, Ihor A., et al.
Published: (2021)
Stress-Strain State of Steam Turbine Lock Joint under Plastic Deformation
by: Palkov, Ihor A., et al.
Published: (2021)
by: Palkov, Ihor A., et al.
Published: (2021)
Development of generating capacities in the Moldavian power system on the basis of steam gas plants using
by: Bicova E.V., et al.
Published: (2003)
by: Bicova E.V., et al.
Published: (2003)
Expediency of using the method of thermochemical regeneration at the reconstruction of a gas thermal power plant
by: Antonets I.V.
Published: (2020)
by: Antonets I.V.
Published: (2020)
CALCULATION OF THE THERMAL FIELD OF A POLYFUNCTIONAL ELECTROMECHANICAL TRANSDUCER WITH A HOLLOW PERFORATED ROTOR
by: Zablodskii, N. N., et al.
Published: (2013)
by: Zablodskii, N. N., et al.
Published: (2013)
APPLICATION OF AN ARTIFICIAL NEURAL NETWORK FOR PREDICTING THE THERMAL STATE OF AN AIR-SOIL HEAT EXCHANGER
by: Basok , B., et al.
Published: (2025)
by: Basok , B., et al.
Published: (2025)
AN ANTHOLOGY OF THE DISTINGUISHED ACHIEVEMENTS IN SCIENCE AND TECHNIQUE. PART 43: TRADITIONAL POWER ENGINEERING. THERMAL POWER PLANTS: STATE AND PROSPECTS OF THEIR DEVELOPMENT
by: Baranov, M. I.
Published: (2018)
by: Baranov, M. I.
Published: (2018)
power efficiency, power intensity of products, the division of general power, multifood production.
by: Kuts G.O.
Published: (2010)
by: Kuts G.O.
Published: (2010)
Physical-mechanical aspects of degradation of heat-echange tubes metal for steam-generators of the type PGW-1000
by: Voyevodin, V.N., et al.
Published: (2019)
by: Voyevodin, V.N., et al.
Published: (2019)
Gas-dynamic Development of Steam Turbine K-325-23,5 High-pressure Cylinder Setting
by: A. V. Rusanov, et al.
Published: (2013)
by: A. V. Rusanov, et al.
Published: (2013)
Effect of TiN inclusions and vibration loads on damage of heat exchange pipes of PGV-1000 steam generators
by: Mitrofanov, A.S.
Published: (2022)
by: Mitrofanov, A.S.
Published: (2022)
Calculation Study of Thermal Stresses in the Medium-Pressure Rotor of the K-200-130 Turbine During Start-Up from a Cold State
by: Ліщук, С. Р., et al.
Published: (2024)
by: Ліщук, С. Р., et al.
Published: (2024)
Calculation Study of Thermal Stresses in the Medium-Pressure Rotor of the K-200-130 Turbine During Start-Up from a Cold State
by: Ліщук, С. Р., et al.
Published: (2024)
by: Ліщук, С. Р., et al.
Published: (2024)
DESIGN FEATURES OF THE EXPERIMENTAL UNIT AND NUMERICAL STUDIES OF BIOMASS THERMO-CHEMICAL PROCESSING PART 4 CALCULATIONS RESULTS OF ELECTRIC HEATERS AND COKE ASH RESIDUE GASIFICATION
by: Rokhman, B., et al.
Published: (2025)
by: Rokhman, B., et al.
Published: (2025)
THE INFLUENCE OF AERODYNAMIC CHARACTERISTICS OF A BLADE PROFILE ON THE ENERGY CHARACTERISTICS OF A WINDOW ROTOR
by: Holovko, V., et al.
Published: (2019)
by: Holovko, V., et al.
Published: (2019)
Similar Items
-
К-325-23,5 Steam Turbine High-Pressure Rotor Thermal and Thermo-structural State during cold start-up
by: Бахмутская, Ю. О., et al.
Published: (2017) -
K-325-23,5 steam turbine high-pressure rotor thermal and thermo-structural state during cold start-up
by: Ju. O. Bakhmutskaja, et al.
Published: (2017) -
Thermal state of the rotor winding of the turbogenerator with direct hydrogen cooling
by: Кобзарь, К. А., et al.
Published: (2015) -
Thermal state of the rotor winding of the turbogenerator with direct hydrogen cooling
by: Кобзарь, К. А., et al.
Published: (2015) -
Thermal and Stress State of the Steam Turbine Control Valve Casing, with the Turbine Operation in the Stationary Modes
by: Koliadiuk, Andrii S., et al.
Published: (2019)