Shear Modulus of a Fiber Composite with a Transtropic Viscolelastic Matrix and Transtropic Elastic Fiber
When solving the problems of deformation solid mechanics, the inhomogeneous composite material is modeled as homogeneous, with averaged mechanical properties − effective characteristics. The purpose of this paper is to develop a technique for determining the effective shear modulus for a viscoelasti...
Gespeichert in:
| Datum: | 2018 |
|---|---|
| Hauptverfasser: | Grebenyuk, Sergey N., Klimenko, Mikhail I. |
| Format: | Artikel |
| Sprache: | Englisch Russisch |
| Veröffentlicht: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2018
|
| Schlagworte: | |
| Online Zugang: | https://journals.uran.ua/jme/article/view/144196 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Journal of Mechanical Engineering |
Institution
Journal of Mechanical EngineeringÄhnliche Einträge
Shear Modulus of a Fiber Composite with a Transtropic Viscolelastic Matrix and Transtropic Elastic Fiber
von: Grebenyuk, Sergey N., et al.
Veröffentlicht: (2018)
von: Grebenyuk, Sergey N., et al.
Veröffentlicht: (2018)
A FIBER-OPTIC HYDROACOUSTIC PRESSURE SENSOR BASED ON INTERMODE INTERFERENCE
von: Linchevskyi, I. V., et al.
Veröffentlicht: (2025)
von: Linchevskyi, I. V., et al.
Veröffentlicht: (2025)
EFFECT OF ANOMALOUSLY STRONG ABSORPTION OF ELECTROMAGNETIC RADIATION IN FINE CONDUCTIVE FIBERS
von: Kokodii, M. G., et al.
Veröffentlicht: (2024)
von: Kokodii, M. G., et al.
Veröffentlicht: (2024)
On the electromagnetic shielding properties of carbon fiber materials
von: Rosu, G., et al.
Veröffentlicht: (2022)
von: Rosu, G., et al.
Veröffentlicht: (2022)
The theory of reducing speckles in a laser projector with a very long multimode fiber
von: Лапчук, А. С., et al.
Veröffentlicht: (2020)
von: Лапчук, А. С., et al.
Veröffentlicht: (2020)
Modernization of an experimental installation and a procedure for investigating the anisotropic viscoelastic properties of composite materials at elevated temperatures
von: Martynenko, V. G., et al.
Veröffentlicht: (2018)
von: Martynenko, V. G., et al.
Veröffentlicht: (2018)
Modernization of an experimental installation and a procedure for investigating the anisotropic viscoelastic properties of composite materials at elevated temperatures
von: Martynenko, V. G., et al.
Veröffentlicht: (2018)
von: Martynenko, V. G., et al.
Veröffentlicht: (2018)
DECAMETER TYPE IV BURSTS, FIBER-BURSTS AND TYPE III BURSTS ASSOCIATED WITH GROUP OF SOLAR ACTIVE REGIONS
von: Antonov, A. V., et al.
Veröffentlicht: (2015)
von: Antonov, A. V., et al.
Veröffentlicht: (2015)
Computer modeling of the thermal field in the elementary volume of polymer composites
von: Мелентьев, Р. Ю.
Veröffentlicht: (2014)
von: Мелентьев, Р. Ю.
Veröffentlicht: (2014)
Computer modeling of the thermal field in the elementary volume of polymer composites
von: Мелентьев, Р. Ю.
Veröffentlicht: (2014)
von: Мелентьев, Р. Ю.
Veröffentlicht: (2014)
Modelling of crack nucleation in the fibre of composite reinforced with unidirectional fibres under shear
von: Гасанов, Ф. Ф.
Veröffentlicht: (2014)
von: Гасанов, Ф. Ф.
Veröffentlicht: (2014)
Modelling of crack nucleation in the fibre of composite reinforced with unidirectional fibres under shear
von: Гасанов, Ф. Ф.
Veröffentlicht: (2014)
von: Гасанов, Ф. Ф.
Veröffentlicht: (2014)
On the similarity of shear deformation of a granular massif and a fragmented medium in the seismically active area
von: Mykulyak, S. V., et al.
Veröffentlicht: (2021)
von: Mykulyak, S. V., et al.
Veröffentlicht: (2021)
A STUDY OF MATERIAL RECOGNITION ACCURACY BY RADIO WAVE METHODS
von: Ovsyannikov, V. V., et al.
Veröffentlicht: (2023)
von: Ovsyannikov, V. V., et al.
Veröffentlicht: (2023)
SEASONAL AND DAILY VARIABILITY ANALYSIS OF THE WIND SHEAR COEFFICIENT
von: Petrenko, K., et al.
Veröffentlicht: (2023)
von: Petrenko, K., et al.
Veröffentlicht: (2023)
Formation of radial optical structures on a circular laser recording system
von: Косяк, І. В., et al.
Veröffentlicht: (2024)
von: Косяк, І. В., et al.
Veröffentlicht: (2024)
Designing finishing materials with a gradient of electrophysical properties
von: Biruk, Yana
Veröffentlicht: (2022)
von: Biruk, Yana
Veröffentlicht: (2022)
On fibers and accessibility of groups acting on trees with inversions
von: Mahmood, Rasheed Mahmood Saleh
Veröffentlicht: (2015)
von: Mahmood, Rasheed Mahmood Saleh
Veröffentlicht: (2015)
OPTICAL WAVELENGTH CONVERTERS IN FIBER OPTICAL NETWORKS
von: UTRERAS TELLO, A. J., et al.
Veröffentlicht: (2018)
von: UTRERAS TELLO, A. J., et al.
Veröffentlicht: (2018)
Shear processes in anisotropic anticlinal geostructures under the gravity action
von: Lubkov, Michail
Veröffentlicht: (2024)
von: Lubkov, Michail
Veröffentlicht: (2024)
Equistrong hole shape for crack growth deceleration under longitudinal shear
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
Equistrong hole shape for crack growth deceleration under longitudinal shear
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
Сonceptualization of latent ecosystem services
von: Morozova, Tetiana V., et al.
Veröffentlicht: (2019)
von: Morozova, Tetiana V., et al.
Veröffentlicht: (2019)
Experimental study of the thermal conductivity of composite materials collectors of solar energy
von: Reztsov, V., et al.
Veröffentlicht: (2016)
von: Reztsov, V., et al.
Veröffentlicht: (2016)
The system of diagnostic of a thermostressed state and operation of a resource for a rotor of a high pressure of turbine T-250/300-240 on stationary and variable operat-ing modes
von: Шульженко, Николай Григорьевич, et al.
Veröffentlicht: (2015)
von: Шульженко, Николай Григорьевич, et al.
Veröffentlicht: (2015)
The system of diagnostic of a thermostressed state and operation of a resource for a rotor of a high pressure of turbine T-250/300-240 on stationary and variable operat-ing modes
von: Шульженко, Николай Григорьевич, et al.
Veröffentlicht: (2015)
von: Шульженко, Николай Григорьевич, et al.
Veröffentlicht: (2015)
Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2019)
von: Fridman, Мark M.
Veröffentlicht: (2019)
Optimization of Bendable I-Section Elements Subject to Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2020)
von: Fridman, Мark M.
Veröffentlicht: (2020)
Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2019)
von: Fridman, Мark M.
Veröffentlicht: (2019)
Optimization of Bendable I-Section Elements Subject to Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2020)
von: Fridman, Мark M.
Veröffentlicht: (2020)
APPLICATION OF MAGNETORHEOLOGICAL ELASTOMERS FOR PERFORMANCE CONTROL OF CUSHIONING SYSTEMS FOR WHEELED VEHICLES
von: Dushchenko, V. V., et al.
Veröffentlicht: (2019)
von: Dushchenko, V. V., et al.
Veröffentlicht: (2019)
Design of Nanostructured Luminofor Coating for a Multi-Junction Solar Cell
von: Beliak, Ie. V., et al.
Veröffentlicht: (2013)
von: Beliak, Ie. V., et al.
Veröffentlicht: (2013)
Non-stationary Response of a Carbon Nanotube-reinforced Composite Conical Shell
von: Avramov, Kostiantyn V., et al.
Veröffentlicht: (2025)
von: Avramov, Kostiantyn V., et al.
Veröffentlicht: (2025)
Non-stationary Response of a Carbon Nanotube-reinforced Composite Conical Shell
von: Avramov, Kostiantyn V., et al.
Veröffentlicht: (2025)
von: Avramov, Kostiantyn V., et al.
Veröffentlicht: (2025)
Ecologically clean evaporation-condensation method application for obtaining of electrical contacts based on copper composite materials
von: Grechanuyk, V.G., et al.
Veröffentlicht: (2018)
von: Grechanuyk, V.G., et al.
Veröffentlicht: (2018)
Determination of the maximum mechanical stresses in the insulating material around a defect with a high dielectric permittivity in an electrostatic field
von: Palchykov, O. О.
Veröffentlicht: (2024)
von: Palchykov, O. О.
Veröffentlicht: (2024)
Еnergy-saving technology for processing of galvanic sludge with obtaining of radio-absorbing materials
von: Samchenko, Dmitry N., et al.
Veröffentlicht: (2020)
von: Samchenko, Dmitry N., et al.
Veröffentlicht: (2020)
INVESTIGATION OF ENERGY PARAMETERS OF BIOMATERIAL CONVERSION PROCESS IN CLOSED FERMENTATION CHAMBER
von: Tereshchuk, M., et al.
Veröffentlicht: (2021)
von: Tereshchuk, M., et al.
Veröffentlicht: (2021)
AN ANTHOLOGY OF THE DISTINGUISHED ACHIEVEMENTS IN SCIENCE AND TECHNIQUE. PART 41: COMPOSITE MATERIALS: THEIR CLASSIFICATION, TECHNOLOGIES OF MAKING, PROPERTIES AND APPLICATION DOMAINS IN MODERN TECHNIQUE
von: Baranov, M. I.
Veröffentlicht: (2017)
von: Baranov, M. I.
Veröffentlicht: (2017)
Approaches to building integrated system of municipal solid waste management: classification of packaging waste
von: Koval, I.I., et al.
Veröffentlicht: (2018)
von: Koval, I.I., et al.
Veröffentlicht: (2018)
Ähnliche Einträge
-
Shear Modulus of a Fiber Composite with a Transtropic Viscolelastic Matrix and Transtropic Elastic Fiber
von: Grebenyuk, Sergey N., et al.
Veröffentlicht: (2018) -
A FIBER-OPTIC HYDROACOUSTIC PRESSURE SENSOR BASED ON INTERMODE INTERFERENCE
von: Linchevskyi, I. V., et al.
Veröffentlicht: (2025) -
EFFECT OF ANOMALOUSLY STRONG ABSORPTION OF ELECTROMAGNETIC RADIATION IN FINE CONDUCTIVE FIBERS
von: Kokodii, M. G., et al.
Veröffentlicht: (2024) -
On the electromagnetic shielding properties of carbon fiber materials
von: Rosu, G., et al.
Veröffentlicht: (2022) -
The theory of reducing speckles in a laser projector with a very long multimode fiber
von: Лапчук, А. С., et al.
Veröffentlicht: (2020)