Chill mould design for manufacture of vital figurine cast parts of power engineering
For rapid development of manufacturing technology of vital figurine cast parts, the use of the modern method of rapid prototyping, allowing to build-up ready models from photopolymer resin on the predesigned 3D-model using laser sintering plants, is of practical interest. The example of application...
Збережено в:
| Дата: | 2014 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | Russian |
| Опубліковано: |
Journal of Mechanical Engineering
2014
|
| Теми: | |
| Онлайн доступ: | https://journals.uran.ua/jme/article/view/19917 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Journal of Mechanical Engineering |