Multi-Cycle Fatigue of Composite Three-Layer Plates with Honeycomb Structure Made by Additive FDM Technologies
The multi-cycle fatigue of three-layer plates with honeycomb structure, which was manufactured using additive FDM technologies from polylactide, is considered. Carbon fiber based on the SIGRAPREG C U200-0/NF-E310/30% pre-preg is chosen as a material for the upper and lower covers. Fatigue analysis o...
Збережено в:
Дата: | 2022 |
---|---|
Автори: | , , , , |
Формат: | Стаття |
Мова: | English Ukrainian |
Опубліковано: |
Journal of Mechanical Engineering
2022
|
Онлайн доступ: | https://journals.uran.ua/jme/article/view/266921 |
Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
Назва журналу: | Journal of Mechanical Engineering |