Peculiarities of obtaining diamond-(Fe-Cu-Ni-Sn) composite materials by hot pressing
Structure formation processes were investigated depending on sintering temperature in hot pressing of diamond-(Fe-Cu-Ni-Sn) composition and their impact on physical and mechanical properties of obtained composite materials. Properties of the composites, such as hardness, wear resistance and strength...
Gespeichert in:
| Datum: | 2017 |
|---|---|
| Hauptverfasser: | , , , , , , |
| Format: | Artikel |
| Sprache: | English |
| Veröffentlicht: |
НТК «Інститут монокристалів» НАН України
2017
|
| Schriftenreihe: | Functional Materials |
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/136690 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Peculiarities of obtaining diamond-(Fe-Cu-Ni-Sn) composite materials by hot pressing / E. Gevorkyan, V. Mechnik, N. Bondarenko, R. Vovk, S. Lytovchenko, V. Chishkala, O. Melnik // Functional Materials. — 2017. — Т. 24, № 1. — С. 31-45. — Бібліогр.: 27 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Zusammenfassung: | Structure formation processes were investigated depending on sintering temperature in hot pressing of diamond-(Fe-Cu-Ni-Sn) composition and their impact on physical and mechanical properties of obtained composite materials. Properties of the composites, such as hardness, wear resistance and strength limits in compressing and folding were studied. It was found that the composite obtained by hot pressing in the temperature range of 20-1000°C and under a pressure of 0.5-40 MPa had the best properties. The results were compared with mechanical properties of composites obtained earlier by sintering in molds placed in a furnace with hydrogen environment at 800°C during 1 h with subsequent hot repressing under different pressures. |
|---|