Влияние пластической деформации на структуру и свойства газаров

It is determined that the mechanical properties of gazars depend on the degree and method of their deformation, changes in the porous structure. It is established that during rolling, the change in the strength properties of gazars occurs more intensively than when drawing by 25-40%. It is shown tha...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Datum:2017
Hauptverfasser: Карпов, В.Ю., Губенко, С.И., Карпов, В.В.
Format: Artikel
Sprache:Russian
Veröffentlicht: Українське матеріалознавче товариство 2017
Schriftenreihe:Вісник Українського матеріалознавчого товариства
Schlagworte:
Online Zugang:https://nasplib.isofts.kiev.ua/handle/123456789/143736
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:Влияние пластической деформации на структуру и свойства газаров / В.Ю. Карпов, С.И. Губенко, В.В. Карпов // Вісник Українського матеріалознавчого товариства. — 2017. — № 1(10). — С. 96-102. — Бібліогр.: 4 назв. — рос.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine
Beschreibung
Zusammenfassung:It is determined that the mechanical properties of gazars depend on the degree and method of their deformation, changes in the porous structure. It is established that during rolling, the change in the strength properties of gazars occurs more intensively than when drawing by 25-40%. It is shown that the surface porous layers of gazars are intensively deformed, become practically monolithic and receive a high level of hard work, which sharply increases their strength. It is proved that deformed but not annealed samples have a strength of 2 ... 3 above higher than monolithic samples of the same dimensions. After annealing, the strength of gazars is 1.5 ... 2 above higher. The process of changing the structure of gazars after annealing for removing internal stresses is considered. Possible mechanisms for changing the porous structure of gazars and increasing their strength are proposed.