Effect of Nano-TiO₂ Particles on Wear and Corrosion Behaviour of AA6063 Surface Composite Fabricated by Friction Stir Processing
In this investigation, the effect of nano-TiO₂ particles on wear and corrosion behaviour of AA6063 surface nanocomposites produced viavia friction stir processing (FSP) was studied. Microstructure analysis of fabricated surface nanocomposites was done with scanning electron microscope and found that...
Збережено в:
| Опубліковано в: : | Металлофизика и новейшие технологии |
|---|---|
| Дата: | 2018 |
| Автори: | Muthukrishnan, D., Balaji, A.N., Raghav, G.R. |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
Інститут металофізики ім. Г.В. Курдюмова НАН України
2018
|
| Теми: | |
| Онлайн доступ: | https://nasplib.isofts.kiev.ua/handle/123456789/145921 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Effect of Nano-TiO₂ Particles on Wear and Corrosion Behaviour of AA6063 Surface Composite Fabricated by Friction Stir Processing / D. Muthukrishnan, A.N. Balaji, G.R. Raghav // Металлофизика и новейшие технологии. — 2018. — Т. 40, № 3. — С. 397-409. — Бібліогр.: 22 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of UkraineСхожі ресурси
Fabrication of Aluminium AA7075 Reinforced by Zinc Metal Matrix Composites and Their Wear Behaviour Analysis
за авторством: Dinesh, M., та інші
Опубліковано: (2017)
за авторством: Dinesh, M., та інші
Опубліковано: (2017)
Microstructure and Salt Fog Corrosion Behaviour of AA2219 Friction Stir Welded Aluminium Alloy
за авторством: Srinivasa Rao, G., та інші
Опубліковано: (2015)
за авторством: Srinivasa Rao, G., та інші
Опубліковано: (2015)
Preparation of Co–Gr Nanocomposites and Analysis of Their Tribological and Corrosion Characteristics
за авторством: Raghav, G.R., та інші
Опубліковано: (2018)
за авторством: Raghav, G.R., та інші
Опубліковано: (2018)
Wear Behaviour of Crankshaft Journals Filled by Submerged Arc Welding
за авторством: Öztürk, A.A., та інші
Опубліковано: (2014)
за авторством: Öztürk, A.A., та інші
Опубліковано: (2014)
Effect of plate thickness on weld speed in friction stir welding of AA6061-T6 Al-alloy plates
за авторством: G. Ipekoglu, та інші
Опубліковано: (2018)
за авторством: G. Ipekoglu, та інші
Опубліковано: (2018)
The Effect of Metal Fibres and Borax Powders on the Wear and Friction Performances of the Organic Based Brake Pads
за авторством: İrem Burcu Algan, та інші
Опубліковано: (2017)
за авторством: İrem Burcu Algan, та інші
Опубліковано: (2017)
The effect of friction stir welding on corrosion resistance of high strength aluminum alloys
за авторством: I. O. Hnatenko, та інші
Опубліковано: (2019)
за авторством: I. O. Hnatenko, та інші
Опубліковано: (2019)
Corrosion and wear behaviour of alumina coatings obtained by various methods
за авторством: T. Lampke, та інші
Опубліковано: (2010)
за авторством: T. Lampke, та інші
Опубліковано: (2010)
Corrosion and wear behaviour of alumina coatings obtained by various methods
за авторством: Lampke, Т., та інші
Опубліковано: (2010)
за авторством: Lampke, Т., та інші
Опубліковано: (2010)
The Effects of Rotation Speed and Friction Time for Joining of AISI 4340—2205 Steels by Friction Welding
за авторством: Caligulu, U., та інші
Опубліковано: (2015)
за авторством: Caligulu, U., та інші
Опубліковано: (2015)
Friction stir welding in aerospace industry (Review)
за авторством: E. V. Sergeeva
Опубліковано: (2013)
за авторством: E. V. Sergeeva
Опубліковано: (2013)
Application of Stir Tool Force Measuring Dynamometer for Friction Stir Welding of Aluminum Alloys
за авторством: Wang, H.F., та інші
Опубліковано: (2017)
за авторством: Wang, H.F., та інші
Опубліковано: (2017)
Effect of Friction Time on Microstructure and Mechanical Properties of Friction Welded AISI 304 Stainless Steel to AISI 1060 Steel
за авторством: Ates, H., та інші
Опубліковано: (2013)
за авторством: Ates, H., та інші
Опубліковано: (2013)
The resistance to stress corrosion cracking of the AMg5M alloy joints received by TIG and friction stir welding
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2015)
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2015)
Recent advances in the quantitative understanding of friction stir welding
за авторством: A. De, та інші
Опубліковано: (2013)
за авторством: A. De, та інші
Опубліковано: (2013)
Recent advances in the quantitative understanding of friction stir welding
за авторством: De, A., та інші
Опубліковано: (2013)
за авторством: De, A., та інші
Опубліковано: (2013)
Friction stir welding of aluminium alloys of different systems of alloying
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2010)
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2010)
Friction stir welding of composite, granulated and quasicrystalline aluminium alloys
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2011)
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2011)
Prediction of parameters of friction stir welding of sheet aluminium alloys
за авторством: A. G. Pokljatskij
Опубліковано: (2019)
за авторством: A. G. Pokljatskij
Опубліковано: (2019)
Mechanical Properties of Friction Stir-Welded Joints of Aluminum Alloys
за авторством: Chen, W.J., та інші
Опубліковано: (2015)
за авторством: Chen, W.J., та інші
Опубліковано: (2015)
Fabrication and properties of conducting diamond nano-crystalline coatings
за авторством: S. F. Dudnik, та інші
Опубліковано: (2014)
за авторством: S. F. Dudnik, та інші
Опубліковано: (2014)
Improving wear and corrosion properties of magnesium alloy by cold sprayed nano WC–17Co coating
за авторством: Chen Jie, та інші
Опубліковано: (2021)
за авторством: Chen Jie, та інші
Опубліковано: (2021)
Thermo-mechanical processes in friction stir welding of magnesium alloy sheets
за авторством: М. А. Khokhlov, та інші
Опубліковано: (2024)
за авторством: М. А. Khokhlov, та інші
Опубліковано: (2024)
Friction stir welding is an effective method of improvement of service characteristics of structures
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2010)
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2010)
Determination of parameters of friction stir welding mode of aluminum-based alloy
за авторством: I. O. Vakulenko, та інші
Опубліковано: (2018)
за авторством: I. O. Vakulenko, та інші
Опубліковано: (2018)
Application of friction stir method for joining of magnesium alloys and their structure modifying
за авторством: A. L. Majstrenko, та інші
Опубліковано: (2016)
за авторством: A. L. Majstrenko, та інші
Опубліковано: (2016)
Application of friction stir method for joining of magnesium alloys and their structure modifying
за авторством: G. M. Grigorenko, та інші
Опубліковано: (2016)
за авторством: G. M. Grigorenko, та інші
Опубліковано: (2016)
Mechanical Behaviour of the Porous and Foam Aluminium in Conditions of Compression: Determination of Key Mechanical Characteristics
за авторством: Byakova, O.V., та інші
Опубліковано: (2017)
за авторством: Byakova, O.V., та інші
Опубліковано: (2017)
Effect of Rotation Speed Parameter on Mechanical Properties of Similar AISI 1040 Parts Joined by Friction Welding
за авторством: Balalan, Z., та інші
Опубліковано: (2018)
за авторством: Balalan, Z., та інші
Опубліковано: (2018)
Investigation of temperature state of copper plate in the weld zone at friction STIR welding
за авторством: M. A. Polieshchuk, та інші
Опубліковано: (2021)
за авторством: M. A. Polieshchuk, та інші
Опубліковано: (2021)
Modeling of heat processes for improvement of structure of metals and alloys in friction stir welding
за авторством: A. L. Majstrenko, та інші
Опубліковано: (2015)
за авторством: A. L. Majstrenko, та інші
Опубліковано: (2015)
Experimental study on full-penetration friction stir welding of 2219 aluminum alloy
за авторством: Sun Qian, та інші
Опубліковано: (2018)
за авторством: Sun Qian, та інші
Опубліковано: (2018)
Modern Polymer Composites for Friction and Wear Applications
за авторством: K. Friedrich, та інші
Опубліковано: (2012)
за авторством: K. Friedrich, та інші
Опубліковано: (2012)
The influence of hydrogen on friction and wear of metals (Review)
за авторством: V. I. Pokhmurskyi, та інші
Опубліковано: (2012)
за авторством: V. I. Pokhmurskyi, та інші
Опубліковано: (2012)
Fabrication and electrical characteristics of nano black phosphorus thin film transistor
за авторством: Wang Lie-long
Опубліковано: (2016)
за авторством: Wang Lie-long
Опубліковано: (2016)
Micro-nano zinc nitrate hexahydrate film fabricated by biomimetic mineralization
за авторством: Lu, F., та інші
Опубліковано: (2019)
за авторством: Lu, F., та інші
Опубліковано: (2019)
Silver nano-particles as friction modificators in couples steel-steel
за авторством: V. I. Pokhmurskyi, та інші
Опубліковано: (2012)
за авторством: V. I. Pokhmurskyi, та інші
Опубліковано: (2012)
Mathematical model of determination of residual stresses and strains in friction stir welding of aluminium alloy
за авторством: B. R. Tsaryk, та інші
Опубліковано: (2022)
за авторством: B. R. Tsaryk, та інші
Опубліковано: (2022)
Some advantages of welded joints of aluminum 1201 alloy produced by friction stir welding
за авторством: A. H. Pokliatskyi, та інші
Опубліковано: (2021)
за авторством: A. H. Pokliatskyi, та інші
Опубліковано: (2021)
Study of specifics of mass transfer in friction stir welding process using physical modeling
за авторством: A. G. Pokljatskij
Опубліковано: (2011)
за авторством: A. G. Pokljatskij
Опубліковано: (2011)
Схожі ресурси
-
Fabrication of Aluminium AA7075 Reinforced by Zinc Metal Matrix Composites and Their Wear Behaviour Analysis
за авторством: Dinesh, M., та інші
Опубліковано: (2017) -
Microstructure and Salt Fog Corrosion Behaviour of AA2219 Friction Stir Welded Aluminium Alloy
за авторством: Srinivasa Rao, G., та інші
Опубліковано: (2015) -
Preparation of Co–Gr Nanocomposites and Analysis of Their Tribological and Corrosion Characteristics
за авторством: Raghav, G.R., та інші
Опубліковано: (2018) -
Wear Behaviour of Crankshaft Journals Filled by Submerged Arc Welding
за авторством: Öztürk, A.A., та інші
Опубліковано: (2014) -
Effect of plate thickness on weld speed in friction stir welding of AA6061-T6 Al-alloy plates
за авторством: G. Ipekoglu, та інші
Опубліковано: (2018)