Assessment of the Low-Cycle Strain-Induced Martensite Transformation in AISI 316 Stainless Steel by Magnetic and Acoustic Nondestructive Methods

• Datum: 2018
• 1. Verfasser: Kim, C.S.
• Format: Artikel
• Sprache: English
• Veröffentlicht: Інститут проблем міцності ім. Г.С. Писаренко НАН України 2018
• Schriftenreihe: Проблемы прочности
• Schlagworte: Научно-технический раздел
• Online Zugang: https://nasplib.isofts.kiev.ua/handle/123456789/173812
• Назва журналу: Digital Library of Periodicals of National Academy of Sciences of Ukraine
• Zitieren: Assessment of the Low-Cycle Strain-Induced Martensite Transformation in AISI 316 Stainless Steel by Magnetic and Acoustic Nondestructive Methods / C.S. Kim // Проблемы прочности. — 2018. — № 1. — С. 50-55. — Бібліогр.: 6 назв. — англ.

The strain-induced martensite transformation during the low-cycle fatigue in austenitic AISI 316 stainless steel was investigated by magnetic and acoustic nondestructive methods. The low-cycle fatigue test was performed at various strain amplitudes. The volume fraction of α’-martensite was determined for the fatigue-failed specimens by magnetic property measurements with further microstructure detection. The cyclic hardening behavior was discussed in terms of the α’-martensite transformation. The volume fraction of α’-martensite was growing with the strain amplitude. An increase in the α’-martensite fraction was evaluated with the nonlinear ultrasonic parameter. The α’-martensite fraction may distort the lattice in austenitic stainless steel, resulting in the distortion of an ultrasonic wave. From this distortion, superharmonics may be generated with the α’-martensite nucleation, which strongly depends on the strain amplitude. The relationship between nonlinear acoustic characteristic and the volume fraction of α’-martensite is linear.