Фазовый состав, структура и механические свойства богатых титаном сплавов системы Ti–Dy–Sn
The phase composition, structure, and mechanical properties of Ti-rich alloys of the Ti–Dy–Sn system are studied. It is shown that plasticity at 20 °C of as-cast and annealed Ti–Dy–Sn alloys decreases versus tin concentration. The concentration dependence of plasticity at 800 °C of as-cast and annea...
Збережено в:
| Дата: | 2007 |
|---|---|
| Автори: | , , , , |
| Формат: | Стаття |
| Мова: | Russian |
| Опубліковано: |
Видавничий дім "Академперіодика" НАН України
2007
|
| Теми: | |
| Онлайн доступ: | https://nasplib.isofts.kiev.ua/handle/123456789/1829 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Фазовый состав, структура и механические свойства богатых титаном сплавов системы Ti–Dy–Sn / М.В. Буланова, Ю.Н. Подрезов, Ю.В. Фартушная, А.Н. Рафал, С.А. Фирстов // Доп. НАН України. — 2007. — N 6. — С. 95–104. — Бібліогр.: 7 назв. — рос. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | The phase composition, structure, and mechanical properties of Ti-rich alloys of the Ti–Dy–Sn system are studied. It is shown that plasticity at 20 °C of as-cast and annealed Ti–Dy–Sn alloys decreases versus tin concentration. The concentration dependence of plasticity at 800 °C of as-cast and annealed alloys shows the maximum at 10–15% (аt.) Sn. The values of yield stress and ultimate stress at 20 and 800 °C of both as-cast and annealed alloys demonstrate the maxima at 10–15% (аt.) tin, as well. This corresponds to the <β*–Ti>+<Dy5Sn3>/<β*–Ti>+<Ti3Sn>+<Dy5Sn3> phase boundary. |
|---|