Modeling and forming the magnetic field of the heavy ion cyclotron

The heavy ion cyclotron was designed and constructed in the Dzhelepov Laboratory of Nuclear Problem, Joint Institute for Nuclear Research. Ions with A/Z~5 were accelerated up to the energy E=2.4 MeV/nucleon. The ECR source with an intensity of 3.5⋅10¹² ions/sec is used as an ion source. The extr...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Datum:2004
Hauptverfasser: Alenitsky, Yu.G., Chesnov, A.F., Kostromin, S.A., Onischenko, L.M., Samsonov, E.V., Zaplatin, N.L.
Format: Artikel
Sprache:English
Veröffentlicht: Національний науковий центр «Харківський фізико-технічний інститут» НАН України 2004
Schriftenreihe:Вопросы атомной науки и техники
Schlagworte:
Online Zugang:https://nasplib.isofts.kiev.ua/handle/123456789/79366
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:Modeling and forming the magnetic field of the heavy ion cyclotron / Yu.G. Alenitsky, A.F. Chesnov, S.A. Kostromin, L.M. Onischenko, E.V. Samsonov, N.L. Zaplatin // Вопросы атомной науки и техники. — 2004. — № 2. — С. 78-80. — Бібліогр.: 5 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine
Beschreibung
Zusammenfassung:The heavy ion cyclotron was designed and constructed in the Dzhelepov Laboratory of Nuclear Problem, Joint Institute for Nuclear Research. Ions with A/Z~5 were accelerated up to the energy E=2.4 MeV/nucleon. The ECR source with an intensity of 3.5⋅10¹² ions/sec is used as an ion source. The extracted beam of ~10¹¹ ions/sec is intended for the track membrane production. The magnetic field of this cyclotron is formed in the compact magnet with the pole diameter 1.6 m by means of four pairs of sector shims installed symmetrically up and down. The gaps are 100 mm, and 40 mm between the poles and shims, respectively. The proper dependence of the isochronous magnetic field on the radius is created, basically, by increasing the angular extension of sector shims inside the range α = 30º...41.8º. Power consumption of an electromagnet is 25 kW.