Buchumschlag

К-325-23,5 Steam Turbine High-Pressure Rotor Thermal and Thermo-structural State during cold start-up

The high-pressure turbine rotor is the most critical and costly steam turbine component. Service experience for the machines with a power of 150 MW and more shows that cracks appear in the region of regulation stage fillets and end seals in high-pressure turbine rotors. The cause of this effect can...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	Бахмутская, Ю. О., Голощапов, В. Н.
Format:	Artikel
Sprache:	Russisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2017
Schlagworte:	steam turbine high pressure rotor boundary conditions thermal state thermal stress
Online Zugang:	https://journals.uran.ua/jme/article/view/105599
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Energy Technologies & Resource Saving

Institution

Energy Technologies & Resource Saving

Ähnliche Einträge

К-325-23,5 Steam Turbine High-Pressure Rotor Thermal and Thermo-structural State during cold start-up
von: Бахмутская, Ю. О., et al.
Veröffentlicht: (2017)

K-325-23,5 steam turbine high-pressure rotor thermal and thermo-structural state during cold start-up
von: Ju. O. Bakhmutskaja, et al.
Veröffentlicht: (2017)

Thermal state of the rotor winding of the turbogenerator with direct hydrogen cooling
von: Кобзарь, К. А., et al.
Veröffentlicht: (2015)

Thermal state of the rotor winding of the turbogenerator with direct hydrogen cooling
von: Кобзарь, К. А., et al.
Veröffentlicht: (2015)

Thermal and Stress State of the Steam Turbine Control Valve Casing, with the Turbine Operation in the Stationary Modes
von: Koliadiuk, Andrii S., et al.
Veröffentlicht: (2019)

Thermal and Stress State of the Steam Turbine Control Valve Casing, with the Turbine Operation in the Stationary Modes
von: Koliadiuk, Andrii S., et al.
Veröffentlicht: (2019)

Recognition of emergency situations of large hydrogenerators and turbogenerators by multi factors analysis of complicated stressed states of units and component parts
von: Вакуленко, А. Н., et al.
Veröffentlicht: (2015)

Recognition of emergency situations of large hydrogenerators and turbogenerators by multi factors analysis of complicated stressed states of units and component parts
von: Вакуленко, А. Н., et al.
Veröffentlicht: (2015)

Development Thermal state of the rotor of the turbogenerator with direct hydrogen cooling
von: Овсянникова, Е. А.
Veröffentlicht: (2017)

Development Thermal state of the rotor of the turbogenerator with direct hydrogen cooling
von: Овсянникова, Е. А.
Veröffentlicht: (2017)

Тепловое и термонапряженное состояния ротора высокого давления турбины К-325-23,5 при пуске из холодного состояния
von: Бахмутская, Ю.О., et al.
Veröffentlicht: (2017)

Performance analysis of a new LP stage located upstream the extraction point in a 225 MW turbine
von: Шиманяк, М., et al.
Veröffentlicht: (2016)

Performance analysis of a new LP stage located upstream the extraction point in a 225 MW turbine
von: Шиманяк, М., et al.
Veröffentlicht: (2016)

Thermostressed State of the Lock Joint of Turbine Rotor Blades of the First Stage of К-500-240 Steam Turbine Medium Pressure Cylinder
von: Palkov, Ihor A., et al.
Veröffentlicht: (2019)

Thermostressed State of the Lock Joint of Turbine Rotor Blades of the First Stage of К-500-240 Steam Turbine Medium Pressure Cylinder
von: Palkov, Ihor A., et al.
Veröffentlicht: (2019)

DEVELOPMENT OF A MATHEMATICAL MODEL FOR A FREQUENCY-CONTROLLED ASYNCHRONOUS MOTOR ROTOR TEMPERATURE FIELD ON THE BASIS OF DIFFERENTIAL EQUATIONS OF HEAT CONDUCTION
von: Ostashevskiy, N. A., et al.
Veröffentlicht: (2013)

Thermal and Stress-Strain State of Cast Bodies of Control Valves of 200 MW Power Units
von: Chernousenko, O. Yu., et al.
Veröffentlicht: (2020)

Thermal and Stress-Strain State of Cast Bodies of Control Valves of 200 MW Power Units
von: Chernousenko, O. Yu., et al.
Veröffentlicht: (2020)

Elastic Stress-Strain State of Elements of the Internal High-Pressure Casing for Steam Turbines
von: Palkov, Serhii A., et al.
Veröffentlicht: (2019)

Elastic Stress-Strain State of Elements of the Internal High-Pressure Casing for Steam Turbines
von: Palkov, Serhii A., et al.
Veröffentlicht: (2019)

Fractal model of estimating quality of cold worked fuel cladding tubes
von: Vakhrusheva, V.S., et al.
Veröffentlicht: (2021)

Features of prolongation of the service life of high- and intermediate-pressure rotors of K-200-130 steam turbine of Luhansk TPP
von: Chernousenko O.Yu., et al.
Veröffentlicht: (2018)

Mathematical modeling of rheostat-reactor start of wound-rotor induction motors
von: Malyar, V. S., et al.
Veröffentlicht: (2022)

The problems and prospects of thermal-pump technologies development in Ukraine
von: Kulyk М.M., et al.
Veröffentlicht: (2006)

CALCULATION OF THE THERMAL FIELD OF A POLYFUNCTIONAL ELECTROMECHANICAL TRANSDUCER WITH A HOLLOW PERFORATED ROTOR
von: Zablodskii, N. N., et al.
Veröffentlicht: (2013)

TWO-DIMENSIONAL MODEL OF THE SOLID FUEL GASIFICATION IN A FIXED BED UNDER PRESSER. 1. INVESTIGATION OF SHUBARKOL COAL CONVERSION IN A STEAM-OXYGEN MIXTURE WITH THE MASS PART OF H2О/O2=45/55
von: Rokhman, B.
Veröffentlicht: (2019)

Expediency of using the method of thermochemical regeneration at the reconstruction of a gas thermal power plant
von: Antonets I.V.
Veröffentlicht: (2020)

Газодинамическое совершенствование проточной части цилиндра високого давления паровой турбины К-325-23,5
von: Русанов, А.В., et al.
Veröffentlicht: (2013)

Gas-dynamic Development of Steam Turbine K-325-23,5 High-pressure Cylinder Setting
von: A. V. Rusanov, et al.
Veröffentlicht: (2013)

APPLICATION OF AN ARTIFICIAL NEURAL NETWORK FOR PREDICTING THE THERMAL STATE OF AN AIR-SOIL HEAT EXCHANGER
von: Basok , B., et al.
Veröffentlicht: (2025)

AN ANTHOLOGY OF THE DISTINGUISHED ACHIEVEMENTS IN SCIENCE AND TECHNIQUE. PART 43: TRADITIONAL POWER ENGINEERING. THERMAL POWER PLANTS: STATE AND PROSPECTS OF THEIR DEVELOPMENT
von: Baranov, M. I.
Veröffentlicht: (2018)

power efficiency, power intensity of products, the division of general power, multifood production.
von: Kuts G.O.
Veröffentlicht: (2010)

Calculation Study of Thermal Stresses in the Medium-Pressure Rotor of the K-200-130 Turbine During Start-Up from a Cold State
von: Ліщук, С. Р., et al.
Veröffentlicht: (2024)

Calculation Study of Thermal Stresses in the Medium-Pressure Rotor of the K-200-130 Turbine During Start-Up from a Cold State
von: Ліщук, С. Р., et al.
Veröffentlicht: (2024)

DESIGN FEATURES OF THE EXPERIMENTAL UNIT AND NUMERICAL STUDIES OF BIOMASS THERMO-CHEMICAL PROCESSING PART 4 CALCULATIONS RESULTS OF ELECTRIC HEATERS AND COKE ASH RESIDUE GASIFICATION
von: Rokhman, B., et al.
Veröffentlicht: (2025)

THE INFLUENCE OF AERODYNAMIC CHARACTERISTICS OF A BLADE PROFILE ON THE ENERGY CHARACTERISTICS OF A WINDOW ROTOR
von: Holovko, V., et al.
Veröffentlicht: (2019)

PECULIARITIES OF CALCULATION OF MAGNETIC SYSTEMS WITH SHORT-CIRCUITED SECONDARY WINDINGS IN IN-PLANE FORMULATION
von: Baida, E. I.
Veröffentlicht: (2015)

Stress-Strain State of Steam Turbine Lock Joint under Plastic Deformation
von: Palkov, Ihor A., et al.
Veröffentlicht: (2021)

Stress-Strain State of Steam Turbine Lock Joint under Plastic Deformation
von: Palkov, Ihor A., et al.
Veröffentlicht: (2021)

Features load capacity assessment of power transformers in the wind power plants
von: Kazanskiy, S., et al.
Veröffentlicht: (2017)