Buchumschlag

К-325-23,5 Steam Turbine High-Pressure Rotor Thermal and Thermo-structural State during cold start-up

The high-pressure turbine rotor is the most critical and costly steam turbine component. Service experience for the machines with a power of 150 MW and more shows that cracks appear in the region of regulation stage fillets and end seals in high-pressure turbine rotors. The cause of this effect can...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	Бахмутская, Ю. О., Голощапов, В. Н.
Format:	Artikel
Sprache:	Russisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2017
Schlagworte:	steam turbine high pressure rotor boundary conditions thermal state thermal stress
Online Zugang:	https://journals.uran.ua/jme/article/view/105599
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Energy Technologies & Resource Saving

Institution

Energy Technologies & Resource Saving

Ähnliche Einträge

К-325-23,5 Steam Turbine High-Pressure Rotor Thermal and Thermo-structural State during cold start-up
von: Бахмутская, Ю. О., et al.
Veröffentlicht: (2017)

Performance analysis of a new LP stage located upstream the extraction point in a 225 MW turbine
von: Шиманяк, М., et al.
Veröffentlicht: (2016)

Performance analysis of a new LP stage located upstream the extraction point in a 225 MW turbine
von: Шиманяк, М., et al.
Veröffentlicht: (2016)

MATHEMATICAL DESCRIPTION OF THE SOLID FUEL GASIFICATION PROCESS IN A FIXED BED: 1. NUMERICAL RESULTS OF THERMAL-CHEMICAL PROCESSING OF PEAT IN A VAPOR- OXYGEN MIXTURE UNDER A PRESSURE OF 3 MPa
von: Rokhman, B.
Veröffentlicht: (2019)

Aerodynamical improvement of design, aerodynamic and power characteristics of “I.P.-L.P.-1” compartment of steam turbine К-325-23,5
von: Солодов, В. Г., et al.
Veröffentlicht: (2016)

Aerodynamical improvement of design, aerodynamic and power characteristics of “I.P.-L.P.-1” compartment of steam turbine К-325-23,5
von: Солодов, В. Г., et al.
Veröffentlicht: (2016)

Experimental Study of the Model Compartment of the Low-Pressure Cylinder of K-320-240 Turbines of JSC "Turboatom"
von: Alyokhina, Svitlana V., et al.
Veröffentlicht: (2019)

Experimental Study of the Model Compartment of the Low-Pressure Cylinder of K-320-240 Turbines of JSC "Turboatom"
von: Alyokhina, Svitlana V., et al.
Veröffentlicht: (2019)

Thermostressed State of the Lock Joint of Turbine Rotor Blades of the First Stage of К-500-240 Steam Turbine Medium Pressure Cylinder
von: Palkov, Ihor A., et al.
Veröffentlicht: (2019)

Thermostressed State of the Lock Joint of Turbine Rotor Blades of the First Stage of К-500-240 Steam Turbine Medium Pressure Cylinder
von: Palkov, Ihor A., et al.
Veröffentlicht: (2019)

Thermal state of the rotor winding of the turbogenerator with direct hydrogen cooling
von: Кобзарь, К. А., et al.
Veröffentlicht: (2015)

Thermal state of the rotor winding of the turbogenerator with direct hydrogen cooling
von: Кобзарь, К. А., et al.
Veröffentlicht: (2015)

DEVELOPMENT OF A MATHEMATICAL MODEL FOR A FREQUENCY-CONTROLLED ASYNCHRONOUS MOTOR ROTOR TEMPERATURE FIELD ON THE BASIS OF DIFFERENTIAL EQUATIONS OF HEAT CONDUCTION
von: Ostashevskiy, N. A., et al.
Veröffentlicht: (2013)

Calculation Study of Thermal Stresses in the Medium-Pressure Rotor of the K-200-130 Turbine During Start-Up from a Cold State
von: Ліщук, С. Р., et al.
Veröffentlicht: (2024)

Calculation Study of Thermal Stresses in the Medium-Pressure Rotor of the K-200-130 Turbine During Start-Up from a Cold State
von: Ліщук, С. Р., et al.
Veröffentlicht: (2024)

Thermal and Stress State of the Steam Turbine Control Valve Casing, with the Turbine Operation in the Stationary Modes
von: Koliadiuk, Andrii S., et al.
Veröffentlicht: (2019)

Thermal and Stress State of the Steam Turbine Control Valve Casing, with the Turbine Operation in the Stationary Modes
von: Koliadiuk, Andrii S., et al.
Veröffentlicht: (2019)

AN ANTHOLOGY OF THE DISTINGUISHED ACHIEVEMENTS IN SCIENCE AND TECHNIQUE. PART 43: TRADITIONAL POWER ENGINEERING. THERMAL POWER PLANTS: STATE AND PROSPECTS OF THEIR DEVELOPMENT
von: Baranov, M. I.
Veröffentlicht: (2018)

TWO-DIMENSIONAL MODEL OF THE SOLID FUEL GASIFICATION IN A FIXED BED UNDER PRESSER. 1. INVESTIGATION OF SHUBARKOL COAL CONVERSION IN A STEAM-OXYGEN MIXTURE WITH THE MASS PART OF H2О/O2=45/55
von: Rokhman, B.
Veröffentlicht: (2019)

DESIGN FEATURES OF THE EXPERIMENTAL UNIT AND NUMERICAL STUDIES OF BIOMASS THERMO-CHEMICAL PROCESSING PART 4 CALCULATIONS RESULTS OF ELECTRIC HEATERS AND COKE ASH RESIDUE GASIFICATION
von: Rokhman, B., et al.
Veröffentlicht: (2025)

Elastic Stress-Strain State of Elements of the Internal High-Pressure Casing for Steam Turbines
von: Palkov, Serhii A., et al.
Veröffentlicht: (2019)

Elastic Stress-Strain State of Elements of the Internal High-Pressure Casing for Steam Turbines
von: Palkov, Serhii A., et al.
Veröffentlicht: (2019)

TWO-DIMENSIONAL MODEL OF THE SOLID FUEL GASIFICATION IN A FIXED BED UNDER PRESSER. 2. NUMERICAL RESULTS OF THERMAL-CHEMICAL PROCESSING OF SHUBARKOL COAL AT A RATIO OF MASS FRACTIONS H2О/O2=72/28
von: Rokhman, B.
Veröffentlicht: (2019)

Development of the Flow Part of Reactive Type HPC of K-325-23.5 Series Steam Turbine Based on the Use of Modern Computer Technologies
von: Русанов, А. В., et al.
Veröffentlicht: (2022)

Development of the Flow Part of Reactive Type HPC of K-325-23.5 Series Steam Turbine Based on the Use of Modern Computer Technologies
von: Русанов, А. В., et al.
Veröffentlicht: (2022)

Numerical study of flow irregularity in a new type control section of steam turbine high-pressure module
von: Bykov, Yurii A., et al.
Veröffentlicht: (2025)

Numerical study of flow irregularity in a new type control section of steam turbine high-pressure module
von: Bykov, Yurii A., et al.
Veröffentlicht: (2025)

Development Thermal state of the rotor of the turbogenerator with direct hydrogen cooling
von: Овсянникова, Е. А.
Veröffentlicht: (2017)

Development Thermal state of the rotor of the turbogenerator with direct hydrogen cooling
von: Овсянникова, Е. А.
Veröffentlicht: (2017)

Эффективный метод подготовки бурого угля к сжиганию на тепловых электрических станциях
von: Кутовой, Владимир Александрович
Veröffentlicht: (2015)

Эффективный метод подготовки бурого угля к сжиганию на тепловых электрических станциях
von: Кутовой, Владимир Александрович
Veröffentlicht: (2015)

NUMERICAL STUDIES OF A TWO-STAGE THERMOCHEMICAL BIOMASS PROCESSING IN A FIXED BED PLANT WITH A CAPACITY OF 1250 kg/h
von: Rokhman, B., et al.
Veröffentlicht: (2023)

Design Forecasting of Thermal Strength and Resource of Steam Turbine structural Components
von: Shulzhenko, Nikolay G., et al.
Veröffentlicht: (2018)

Design Forecasting of Thermal Strength and Resource of Steam Turbine structural Components
von: Shulzhenko, Nikolay G., et al.
Veröffentlicht: (2018)

THEORETICAL STUDY OF NONSTATIONARY AIR GASIFICATION OF SOLID FUEL IN A FIXED BED AT ATMOSPHERIC PRESSURE
von: Rokhman, B., et al.
Veröffentlicht: (2020)

DESIGN FEATURES OF THE EXPERIMENTAL UNIT AND NUMERICAL STUDIES OF BAGASSE THER-MOCHEMICAL PROCESSING PART 1 REACTOR DESCRIPTION AND WORKFLOW MODELING
von: Rohman , B. B., et al.
Veröffentlicht: (2024)

DESIGN FEATURES OF THE EXPERIMENTAL UNIT AND NUMERICAL STUDIES OF BAGASSE THERMOCHEMICAL PROCESSING PART 2. ANALYSIS OF THE PYROLYSIS PROCESS IN A FIXED BED APPARATUS
von: Rohman , B., et al.
Veröffentlicht: (2024)

CALCULATION OF THE THERMAL FIELD OF A POLYFUNCTIONAL ELECTROMECHANICAL TRANSDUCER WITH A HOLLOW PERFORATED ROTOR
von: Zablodskii, N. N., et al.
Veröffentlicht: (2013)

DETERMINATION OF THERMOPHYSICAL PROPERTIES OF ROCKS USING WELLS
von: Morozov, Y.
Veröffentlicht: (2023)

Mathematical modeling of rheostat-reactor start of wound-rotor induction motors
von: Malyar, V. S., et al.
Veröffentlicht: (2022)