Equistrong hole shape for crack growth deceleration under longitudinal shear
The problem of finding an equistrong hole shape in crack tip and its effect on crack development is considered. A criterion and method for the problem solution to prevent brittle fracture of solid weakened by longitudinal shear crack is proposed. Using the perturbation method and the conformal mappi...
Gespeichert in:
| Datum: | 2018 |
|---|---|
| 1. Verfasser: | Калантарлы, Н. М. |
| Format: | Artikel |
| Sprache: | Russisch |
| Veröffentlicht: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2018
|
| Schlagworte: | |
| Online Zugang: | https://journals.uran.ua/jme/article/view/117207 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Energy Technologies & Resource Saving |
Institution
Energy Technologies & Resource SavingÄhnliche Einträge
Equistrong hole shape for crack growth deceleration under longitudinal shear
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)
Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)
Modeling of shear crack nucleation in a body, weakening by periodic system of circular holes
von: Гасанов, Ф. Ф.
Veröffentlicht: (2013)
von: Гасанов, Ф. Ф.
Veröffentlicht: (2013)
Modeling of shear crack nucleation in a body, weakening by periodic system of circular holes
von: Гасанов, Ф. Ф.
Veröffentlicht: (2013)
von: Гасанов, Ф. Ф.
Veröffentlicht: (2013)
Minimization of the Stressed State of a Stringer Plate with a Hole and Rectilinear Cracks
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2019)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2019)
Minimization of the Stressed State of a Stringer Plate with a Hole and Rectilinear Cracks
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2019)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2019)
Partial closure of rectilinear bridged cracks in stringer plate with a hole
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)
Partial closure of rectilinear bridged cracks in stringer plate with a hole
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)
Computational model of cracking in circular heated disk
von: Калантарлы, Наиля Мерадж гызы
Veröffentlicht: (2015)
von: Калантарлы, Наиля Мерадж гызы
Veröffentlicht: (2015)
Computational model of cracking in circular heated disk
von: Калантарлы, Наиля Мерадж гызы
Veröffentlicht: (2015)
von: Калантарлы, Наиля Мерадж гызы
Veröffentlicht: (2015)
Modelling of crack nucleation in the fibre of composite reinforced with unidirectional fibres under shear
von: Гасанов, Ф. Ф.
Veröffentlicht: (2014)
von: Гасанов, Ф. Ф.
Veröffentlicht: (2014)
Modelling of crack nucleation in the fibre of composite reinforced with unidirectional fibres under shear
von: Гасанов, Ф. Ф.
Veröffentlicht: (2014)
von: Гасанов, Ф. Ф.
Veröffentlicht: (2014)
Effect of small recesses and swellings on cohesive crack growth in stretched by two concentrated forces plate
von: Гасанов, Шахин
Veröffentlicht: (2015)
von: Гасанов, Шахин
Veröffentlicht: (2015)
Effect of small recesses and swellings on cohesive crack growth in stretched by two concentrated forces plate
von: Гасанов, Шахин
Veröffentlicht: (2015)
von: Гасанов, Шахин
Veröffentlicht: (2015)
Modeling Crack Initiation in a Composite Under Bending
von: Hasanov, Sh. G.
Veröffentlicht: (2018)
von: Hasanov, Sh. G.
Veröffentlicht: (2018)
Modeling Crack Initiation in a Composite Under Bending
von: Hasanov, Sh. G.
Veröffentlicht: (2018)
von: Hasanov, Sh. G.
Veröffentlicht: (2018)
Effect of local temperature field on retardation of curvilinear crack with allowance of plastic deformation
von: Мустафаев, Азер Байрам оглы
Veröffentlicht: (2015)
von: Мустафаев, Азер Байрам оглы
Veröffentlicht: (2015)
Effect of local temperature field on retardation of curvilinear crack with allowance of plastic deformation
von: Мустафаев, Азер Байрам оглы
Veröffentlicht: (2015)
von: Мустафаев, Азер Байрам оглы
Veröffentlicht: (2015)
Fracture of non-uniformly heated annular disk
von: Калантарлы, Н. М.
Veröffentlicht: (2014)
von: Калантарлы, Н. М.
Veröffentlicht: (2014)
Fracture of non-uniformly heated annular disk
von: Калантарлы, Н. М.
Veröffentlicht: (2014)
von: Калантарлы, Н. М.
Veröffentlicht: (2014)
Preconditions for the ozone hole decrease in 2017
von: Kravchenko, Volodymyr, et al.
Veröffentlicht: (2018)
von: Kravchenko, Volodymyr, et al.
Veröffentlicht: (2018)
SEASONAL AND DAILY VARIABILITY ANALYSIS OF THE WIND SHEAR COEFFICIENT
von: Petrenko, K., et al.
Veröffentlicht: (2023)
von: Petrenko, K., et al.
Veröffentlicht: (2023)
Shear processes in anisotropic anticlinal geostructures under the gravity action
von: Lubkov, Michail
Veröffentlicht: (2024)
von: Lubkov, Michail
Veröffentlicht: (2024)
The Studying of Orthogonalization Properties of Longitudinally Inhomogeneous Nondepolarizing Medium
von: Kolomiets, I. S., et al.
Veröffentlicht: (2013)
von: Kolomiets, I. S., et al.
Veröffentlicht: (2013)
On the similarity of shear deformation of a granular massif and a fragmented medium in the seismically active area
von: Mykulyak, S. V., et al.
Veröffentlicht: (2021)
von: Mykulyak, S. V., et al.
Veröffentlicht: (2021)
Shear Modulus of a Fiber Composite with a Transtropic Viscolelastic Matrix and Transtropic Elastic Fiber
von: Grebenyuk, Sergey N., et al.
Veröffentlicht: (2018)
von: Grebenyuk, Sergey N., et al.
Veröffentlicht: (2018)
Shear Modulus of a Fiber Composite with a Transtropic Viscolelastic Matrix and Transtropic Elastic Fiber
von: Grebenyuk, Sergey N., et al.
Veröffentlicht: (2018)
von: Grebenyuk, Sergey N., et al.
Veröffentlicht: (2018)
Wheeled Vehicle Brake Drum Computation by Fracture Toughness Criteria
von: Askerov, Sahib A.
Veröffentlicht: (2025)
von: Askerov, Sahib A.
Veröffentlicht: (2025)
Wheeled Vehicle Brake Drum Computation by Fracture Toughness Criteria
von: Askerov, Sahib A.
Veröffentlicht: (2025)
von: Askerov, Sahib A.
Veröffentlicht: (2025)
Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
von: Зульфугаров, Э. И.
Veröffentlicht: (2014)
von: Зульфугаров, Э. И.
Veröffentlicht: (2014)
Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
von: Зульфугаров, Э. И.
Veröffentlicht: (2014)
von: Зульфугаров, Э. И.
Veröffentlicht: (2014)
Stressed State of a Hollow Cylinder with a System of Cracks under Longitudinal Shear Harmonic Oscillations
von: Kyrylova, O. I., et al.
Veröffentlicht: (2019)
von: Kyrylova, O. I., et al.
Veröffentlicht: (2019)
Stressed State of a Hollow Cylinder with a System of Cracks under Longitudinal Shear Harmonic Oscillations
von: Kyrylova, O. I., et al.
Veröffentlicht: (2019)
von: Kyrylova, O. I., et al.
Veröffentlicht: (2019)
Modeling of partial closure of slots system in perforated isotropic medium reinforced by stringers
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2018)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2018)
Modeling of partial closure of slots system in perforated isotropic medium reinforced by stringers
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2018)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2018)
ELECTROMAGNETIC WAVE EXCITATION BY A LONGITUDINAL SLOT IN A BROAD WALL OF RECTANGULAR WAVEGUIDE IN THE PRESENCE OF PASSIVE IMPEDANCE VIBRATORS OUTSIDE THE WAVEGUIDE
von: Berdnik, S. L., et al.
Veröffentlicht: (2016)
von: Berdnik, S. L., et al.
Veröffentlicht: (2016)
EXPERIMENTAL DETERMINATION OF LONGITUDINAL COMPONENT OF MAGNETIC FLUX IN FERROMAGNETIC WIRE OF SINGLE-CORE POWER CABLE ARMOUR
von: Kostiukov, I. A.
Veröffentlicht: (2014)
von: Kostiukov, I. A.
Veröffentlicht: (2014)
Minimization of fracture parameters for friction pair hub
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2015)
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2015)
Minimization of fracture parameters for friction pair hub
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2015)
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2015)
Ähnliche Einträge
-
Equistrong hole shape for crack growth deceleration under longitudinal shear
von: Калантарлы, Н. М.
Veröffentlicht: (2018) -
Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020) -
Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020) -
Modeling of shear crack nucleation in a body, weakening by periodic system of circular holes
von: Гасанов, Ф. Ф.
Veröffentlicht: (2013) -
Modeling of shear crack nucleation in a body, weakening by periodic system of circular holes
von: Гасанов, Ф. Ф.
Veröffentlicht: (2013)