Choosing a Universal Air Collector Design for a Cylindrical-Shaped Hot-Wire Anemometer
Air flow measurement at the outlets of air terminal devices installed in ventilation systems is very difficult. At the outlets of anemostats, swirl diffusers, grilles, the air flow can swirl, contract, or expand sharply, change its direction, etc., which causes great measurement errors. Th...
Saved in:
| Date: | 2021 |
|---|---|
| Main Authors: | Цаканян, О. С., Кошель, С. В. |
| Format: | Article |
| Language: | English Russian |
| Published: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2021
|
| Online Access: | https://journals.uran.ua/jme/article/view/235450 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Energy Technologies & Resource Saving |
Institution
Energy Technologies & Resource SavingSimilar Items
Choosing a Universal Air Collector Design for a Cylindrical-Shaped Hot-Wire Anemometer
by: Цаканян, О. С., et al.
Published: (2021)
by: Цаканян, О. С., et al.
Published: (2021)
Development of the Universal Air Collector Design for Measuring the Flow Rate of Swirling Air Flow Using an Integral Thermoanemometer
by: Цаканян, О. С., et al.
Published: (2024)
by: Цаканян, О. С., et al.
Published: (2024)
Development of the Universal Air Collector Design for Measuring the Flow Rate of Swirling Air Flow Using an Integral Thermoanemometer
by: Цаканян, О. С., et al.
Published: (2024)
by: Цаканян, О. С., et al.
Published: (2024)
Use of In-house Design Modules When Choosing Bearing Assemblies for Pumps Being Designed
by: Rudenko, Andrii A., et al.
Published: (2020)
by: Rudenko, Andrii A., et al.
Published: (2020)
Use of In-house Design Modules When Choosing Bearing Assemblies for Pumps Being Designed
by: Rudenko, Andrii A., et al.
Published: (2020)
by: Rudenko, Andrii A., et al.
Published: (2020)
For constructing a spherical solar collector
by: Мацевитый, Ю. М., et al.
Published: (2016)
by: Мацевитый, Ю. М., et al.
Published: (2016)
For constructing a spherical solar collector
by: Мацевитый, Ю. М., et al.
Published: (2016)
by: Мацевитый, Ю. М., et al.
Published: (2016)
Parabolic Boundary Value Problems in a Piecewise Homogeneous Wedge-Shaped Cylindrical-Circular Space with a Cavity
by: Конет, Іван Михайлович, et al.
Published: (2018)
by: Конет, Іван Михайлович, et al.
Published: (2018)
Parabolic Boundary Value Problems in a Piecewise Homogeneous Wedge-Shaped Cylindrical-Circular Layer with a Cavity
by: Громик, Андрій, et al.
Published: (2022)
by: Громик, Андрій, et al.
Published: (2022)
DETERMINATION OF THE EFFICIENCY OF SOLAR HOT WATER SYSTEMS IMPLEMENTATION
by: Matyakh, S., et al.
Published: (2020)
by: Matyakh, S., et al.
Published: (2020)
Parabolic Boundary Value Problems of Mathematical Physics in a Piecewise Homogeneous Wedge-Shaped Cylindrical-Circular Half-Space with a Cavity
by: Громик, Андрій, et al.
Published: (2023)
by: Громик, Андрій, et al.
Published: (2023)
Hyperbolic Boundary Value Problems of Mathematical Physics in a Piecewise Homogeneous Wedge-Shaped Cylindrical-Circular Half-Space With a Cavity
by: Громик, Андрій, et al.
Published: (2025)
by: Громик, Андрій, et al.
Published: (2025)
Features of designing high-voltage overhead power lines in an underground collector
by: Shevchenko, S. Yu., et al.
Published: (2025)
by: Shevchenko, S. Yu., et al.
Published: (2025)
Hyperbolic Boundary Value Problems of Mathematical Physics in a Piecewise Homogeneous Wedge-Shaped Cylindrical-Circular Half-Space
by: Громик, Андрій, et al.
Published: (2025)
by: Громик, Андрій, et al.
Published: (2025)
Choosing the operating condition and the design values of the device for extraction of thermal energy from waste oil and gas well
by: Мацевитый, Ю. М., et al.
Published: (2016)
by: Мацевитый, Ю. М., et al.
Published: (2016)
Choosing the operating condition and the design values of the device for extraction of thermal energy from waste oil and gas well
by: Мацевитый, Ю. М., et al.
Published: (2016)
by: Мацевитый, Ю. М., et al.
Published: (2016)
Semi-Сonductor Terahertz Systems of Coherent Reception on the Effect of “Hot-Electrons”
by: Eru, I. I.
Published: (2012)
by: Eru, I. I.
Published: (2012)
Optimal Design of Single-Layered Reinforced Cylindrical Shells
by: Филатов, Г. В.
Published: (2021)
by: Филатов, Г. В.
Published: (2021)
Optimal Design of Single-Layered Reinforced Cylindrical Shells
by: Филатов, Г. В.
Published: (2021)
by: Филатов, Г. В.
Published: (2021)
CALCULATION OF COMPENSATING SUSCEPTANCE FOR A THREE-WIRE NET
by: Sirotin, Iu. A.
Published: (2014)
by: Sirotin, Iu. A.
Published: (2014)
Free-convective air movement in the vertical channel with discrete heat sources
by: Цаканян, О. С., et al.
Published: (2015)
by: Цаканян, О. С., et al.
Published: (2015)
Free-convective air movement in the vertical channel with discrete heat sources
by: Цаканян, О. С., et al.
Published: (2015)
by: Цаканян, О. С., et al.
Published: (2015)
Heat transfer of multichannel water convectors under natural convection
by: Цаканян, О. С., et al.
Published: (2013)
by: Цаканян, О. С., et al.
Published: (2013)
Heat transfer of multichannel water convectors under natural convection
by: Цаканян, О. С., et al.
Published: (2013)
by: Цаканян, О. С., et al.
Published: (2013)
COMPARATIVE ANALYSIS OF WEIGHT AND COST INDICATIONS OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
by: Stavinskii, A. A., et al.
Published: (2015)
by: Stavinskii, A. A., et al.
Published: (2015)
COMPARATIVE ANALYSIS OF ACTIVE POWER LOSSES OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
by: Stavinskii, A. A., et al.
Published: (2015)
by: Stavinskii, A. A., et al.
Published: (2015)
Analysis of the Stress State of a Layer with Two Cylindrical Swivel Joints and a Cylindrical Cavity
by: Мірошніков, В. Ю., et al.
Published: (2024)
by: Мірошніков, В. Ю., et al.
Published: (2024)
Analysis of the Stress State of a Layer with Two Cylindrical Swivel Joints and a Cylindrical Cavity
by: Мірошніков, В. Ю., et al.
Published: (2024)
by: Мірошніков, В. Ю., et al.
Published: (2024)
Integral Thermo-Anemometers for Average Temperature and Airflow Measurement in Ducts, at Anemostat Outlets and in Ventilation Grilles
by: Tsakanian, Oleh S., et al.
Published: (2021)
by: Tsakanian, Oleh S., et al.
Published: (2021)
Integral Thermo-Anemometers for Average Temperature and Airflow Measurement in Ducts, at Anemostat Outlets and in Ventilation Grilles
by: Tsakanian, Oleh S., et al.
Published: (2021)
by: Tsakanian, Oleh S., et al.
Published: (2021)
Metal Screen Influence on the Resonant Length of a Wire Antenna
by: Gorobets, N. N., et al.
Published: (2012)
by: Gorobets, N. N., et al.
Published: (2012)
Choosing the thermogas dynamic and design values of peak load turbine for high-temperature topping part of power unit K-300-24014
by: Мацевитый, Юрий Михайлович, et al.
Published: (2012)
by: Мацевитый, Юрий Михайлович, et al.
Published: (2012)
Choosing the thermogas dynamic and design values of peak load turbine for high-temperature topping part of power unit K-300-24014
by: Мацевитый, Юрий Михайлович, et al.
Published: (2012)
by: Мацевитый, Юрий Михайлович, et al.
Published: (2012)
DIPOLE ANTENNAS WITH A SECTOR-SHAPED RADIATION PATTERN
by: Gorobets, M. M., et al.
Published: (2024)
by: Gorobets, M. M., et al.
Published: (2024)
The use of functional-cost analysis in the tasks of alternatives choosing
by: Топунова, В. Ю., et al.
Published: (2023)
by: Топунова, В. Ю., et al.
Published: (2023)
The models of the “VOIDS” in the Universe
by: Korkina, M. P., et al.
Published: (2013)
by: Korkina, M. P., et al.
Published: (2013)
RESEARCH ON THE STABILITY AND SIMULATION OF THE ELECTRICAL AND THERMAL PARTS OF A HYBRID PHOTOVOLTAIC THERMAL COLLECTOR
by: Bondarenko , D., et al.
Published: (2025)
by: Bondarenko , D., et al.
Published: (2025)
To the orientation of spherical solar collectors
by: Ценципер, А. И., et al.
Published: (2015)
by: Ценципер, А. И., et al.
Published: (2015)
To the orientation of spherical solar collectors
by: Ценципер, А. И., et al.
Published: (2015)
by: Ценципер, А. И., et al.
Published: (2015)
A natural method of evaluating the permeability of the water-collector skeleter and optimization of the debit of fountain wells
by: Ludanov, K., et al.
Published: (2017)
by: Ludanov, K., et al.
Published: (2017)
Similar Items
-
Choosing a Universal Air Collector Design for a Cylindrical-Shaped Hot-Wire Anemometer
by: Цаканян, О. С., et al.
Published: (2021) -
Development of the Universal Air Collector Design for Measuring the Flow Rate of Swirling Air Flow Using an Integral Thermoanemometer
by: Цаканян, О. С., et al.
Published: (2024) -
Development of the Universal Air Collector Design for Measuring the Flow Rate of Swirling Air Flow Using an Integral Thermoanemometer
by: Цаканян, О. С., et al.
Published: (2024) -
Use of In-house Design Modules When Choosing Bearing Assemblies for Pumps Being Designed
by: Rudenko, Andrii A., et al.
Published: (2020) -
Use of In-house Design Modules When Choosing Bearing Assemblies for Pumps Being Designed
by: Rudenko, Andrii A., et al.
Published: (2020)