Buchumschlag

Principal Modernization Solutions for a 300 MW Power Unit to be Converted to Operate at Ultra-Supercritical Steam Parameters

This paper analyses the state of power engineering in Ukraine and the main trends in the development of the world market in the field of converting high-capacity powerful power units of thermal power plants into ultra-supercritical (USC) ones. It is shown that the energy sector of Ukraine requires s...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2022
Hauptverfasser:	Костиков, А. О., Субботин, В. Г., Шубенко, А. Л., Сенецкий, А. В., Тарасова, В. А., Голощапов, В. Н., Бабак, Н. Ю.
Format:	Artikel
Sprache:	Englisch Russisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2022
Online Zugang:	https://journals.uran.ua/jme/article/view/248502
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Energy Technologies & Resource Saving

Institution

Energy Technologies & Resource Saving

Ähnliche Einträge

Principal Modernization Solutions for a 300 MW Power Unit to be Converted to Operate at Ultra-Supercritical Steam Parameters
von: Костиков, А. О., et al.
Veröffentlicht: (2022)

Principal Modernization Solutions for a 300 MW Power Unit to be Converted to Operate at Ultra-Supercritical Steam Parameters
von: A. O. Kostikov, et al.
Veröffentlicht: (2021)

Ways of TPP Power Units Modernization During Their Conversion to Ultra-Supercritical Steam Parameters
von: Костіков, А. О., et al.
Veröffentlicht: (2024)

Ways of TPP Power Units Modernization During Their Conversion to Ultra-Supercritical Steam Parameters
von: Костіков, А. О., et al.
Veröffentlicht: (2024)

Concept of K-300 Series Steam Turbine Flow Part Modernization for Transition to Operation with Ultra-Supercritical Steam Parameters
von: Русанов, Р. А.
Veröffentlicht: (2026)

Concept of K-300 Series Steam Turbine Flow Part Modernization for Transition to Operation with Ultra-Supercritical Steam Parameters
von: Русанов, Р. А.
Veröffentlicht: (2026)

Energy efficiency of cooling systems of thermal stresses the most powerful turbo units with supercritical and supercritical steam parameters of the initial
von: Переверзев, Д. А., et al.
Veröffentlicht: (2016)

Energy efficiency of cooling systems of thermal stresses the most powerful turbo units with supercritical and supercritical steam parameters of the initial
von: Переверзев, Д. А., et al.
Veröffentlicht: (2016)

Method of calculation of unsteady formation of the liquid phase in rapidly expanding flows of supercooled steam in the stages of wet steam turbines
von: Шубенко, Александр Леонидович, et al.
Veröffentlicht: (2015)

Method of calculation of unsteady formation of the liquid phase in rapidly expanding flows of supercooled steam in the stages of wet steam turbines
von: Шубенко, Александр Леонидович, et al.
Veröffentlicht: (2015)

Optimal Thermal Output of an Absorption Heat Pump with Steam Heating Integrated in a PT-60/70-130/13 Steam Turbine
von: Шубенко, О. Л., et al.
Veröffentlicht: (2025)

Optimal Thermal Output of an Absorption Heat Pump with Steam Heating Integrated in a PT-60/70-130/13 Steam Turbine
von: Шубенко, О. Л., et al.
Veröffentlicht: (2025)

The analysis of temperature field of rotor of turbogenerator capacity 300 mw at asymmetry of cooling of grooving zone
von: K. A. Kuchinskij
Veröffentlicht: (2013)

Calculation of Performance of Coal-pulverisation Systems of Boilers TTP-312 in 300 mW Power Units by Burning of Non-Project Fuels
von: S. Y. Mysak
Veröffentlicht: (2015)

The plastic deformation mechanisms of ultra fine-grained copper at temperatures 4.2–300 K
von: N. V. Isaev, et al.
Veröffentlicht: (2016)

MAIN CONCEPTUAL SOLUTIONS AND METHODS OF THEIR IMPLEMENTATION WHEN CHANGING THE 300 MW ENERGY UNITS FROM BURNING ANTHRACITE CULM TO BURNING COAL OF THE GAS GROUP
von: Rokhman, B.B.
Veröffentlicht: (2018)

Main conceptual solutions and methods of their implementation when changing the 300 mw energy units from burning anthracite culm to burning coal of the gas group
von: B. B. Rokhman
Veröffentlicht: (2018)

Development of the method of construction of the functions rational management of the thermal state of power steam turbine units
von: Переверзев, Д. А., et al.
Veröffentlicht: (2016)

Development of the method of construction of the functions rational management of the thermal state of power steam turbine units
von: Переверзев, Д. А., et al.
Veröffentlicht: (2016)

Manufacture of the combined welded-forged medium-pressure rotor for 325 mW steam turbine
von: A. K. Tsarjuk, et al.
Veröffentlicht: (2012)

Метод расчета нестационарного образования жидкой фазы в быстрорасширяющихся потоках переохлажденного пара в ступенях влажнопаровых турбин
von: Шубенко, А.Л., et al.
Veröffentlicht: (2015)

Choosing the thermogas dynamic and design values of peak load turbine for high-temperature topping part of power unit K-300-24014
von: Мацевитый, Юрий Михайлович, et al.
Veröffentlicht: (2012)

Choosing the thermogas dynamic and design values of peak load turbine for high-temperature topping part of power unit K-300-24014
von: Мацевитый, Юрий Михайлович, et al.
Veröffentlicht: (2012)

The Gas-Dynamic Efficiency Increase of the K-300 Series Steam Turbine Control Compartment
von: Rusanov, Andrii V., et al.
Veröffentlicht: (2021)

The Gas-Dynamic Efficiency Increase of the K-300 Series Steam Turbine Control Compartment
von: Rusanov, Andrii V., et al.
Veröffentlicht: (2021)

The Gas-Dynamic Efficiency Increase of the K-300 Series Steam Turbine Control Compartment
von: A. V. Rusanov, et al.
Veröffentlicht: (2020)

Development volumetric mathematical models of cooling-dawn steam turbines after stops powerful generating units of thermal power plants
von: Переверзев, Д. А., et al.
Veröffentlicht: (2016)

Development volumetric mathematical models of cooling-dawn steam turbines after stops powerful generating units of thermal power plants
von: Переверзев, Д. А., et al.
Veröffentlicht: (2016)

Development of flow parts of cogeneration turbines with a capacity of 2.5 and 5 MW using modern computer technology
von: Русанов, Р. А., et al.
Veröffentlicht: (2015)

Development of flow parts of cogeneration turbines with a capacity of 2.5 and 5 MW using modern computer technology
von: Русанов, Р. А., et al.
Veröffentlicht: (2015)

Peculiarities of welding and control in manufacture of heat-exchange modules of boiler-utiliser of steam-gas electric station of 150 MW capacity
von: A. K. Tsarjuk, et al.
Veröffentlicht: (2015)

Performance analysis of a new LP stage located upstream the extraction point in a 225 MW turbine
von: Шиманяк, М., et al.
Veröffentlicht: (2016)

Performance analysis of a new LP stage located upstream the extraction point in a 225 MW turbine
von: Шиманяк, М., et al.
Veröffentlicht: (2016)

Simulation of the Erosion-Corrosion Destruction Process of Steam Turbine Low-Pressure Cylinder Blades
von: Шубенко, О. Л., et al.
Veröffentlicht: (2023)

Simulation of the Erosion-Corrosion Destruction Process of Steam Turbine Low-Pressure Cylinder Blades
von: Шубенко, О. Л., et al.
Veröffentlicht: (2023)

К-325-23,5 Steam Turbine High-Pressure Rotor Thermal and Thermo-structural State during cold start-up
von: Бахмутская, Ю. О., et al.
Veröffentlicht: (2017)

К-325-23,5 Steam Turbine High-Pressure Rotor Thermal and Thermo-structural State during cold start-up
von: Бахмутская, Ю. О., et al.
Veröffentlicht: (2017)

Оптимизация ширины вентиляционного тракта контейнера с отработанным ядерным топливом
von: Алёхина, С.В., et al.
Veröffentlicht: (2011)

Electromagnetic radiation in the steam turbine
von: Тарелин, А. А., et al.
Veröffentlicht: (2017)

Electromagnetic radiation in the steam turbine
von: Тарелин, А. А., et al.
Veröffentlicht: (2017)