Отримання мікропоруватих шарів GaAs методом хімічного травлення на підкладках р-GaAs та їхня фотолюмінісценція
The porous GaAs layers have been obtained on the GaAs(100) and GaAs(111) substrates by the chemical etching method. Etching of the substrates was carried out in HF-based solutions using HNO3 or Н2О2 as an oxidizer. Sponge layers were formed with adding of HNO3 and pores got pyramid-like shapes unifo...
Збережено в:
| Дата: | 2012 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | Російська |
| Опубліковано: |
Chuiko Institute of Surface Chemistry National Academy of Sciences of Ukraine
2012
|
| Онлайн доступ: | https://www.cpts.com.ua/index.php/cpts/article/view/150 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Chemistry, Physics and Technology of Surface |
Репозитарії
Chemistry, Physics and Technology of Surface| Резюме: | The porous GaAs layers have been obtained on the GaAs(100) and GaAs(111) substrates by the chemical etching method. Etching of the substrates was carried out in HF-based solutions using HNO3 or Н2О2 as an oxidizer. Sponge layers were formed with adding of HNO3 and pores got pyramid-like shapes uniformly covering the surface and orienting along one direction when H2O2 was used. The photoluminescence spectra of the layers contain the wide band with a non-elementary structure in the visible spectral range. The visible photoluminescence band is decomposed into three sub-bands with Emax equal to 2.844, 2.508 and 1.85 eV and that is caused not from emission of compound element oxides but is mainly due to a quantum dimensional effect. According to the calculations, the linear sizes of crystallites are estimated as 6.5, 4 and 3.5 nm with predominating of 4 nm diameter. |
|---|