Низькотемпературна наномодифікація поверхні нержавіючої сталі іонними пучками
The samples containing chromium, molybdenum and titanium on the base of stainless foil were prepared by low-temperature ionic implantation. The synthesized composites were studied by optical microscopy, atomic force microscopy and sclerometric analysis. Through computer simulation, formation of nano...
Gespeichert in:
| Datum: | 2014 |
|---|---|
| Hauptverfasser: | , , , |
| Format: | Artikel |
| Sprache: | Russisch |
| Veröffentlicht: |
Chuiko Institute of Surface Chemistry National Academy of Sciences of Ukraine
2014
|
| Schlagworte: | |
| Online Zugang: | https://www.cpts.com.ua/index.php/cpts/article/view/278 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Chemistry, Physics and Technology of Surface |
Institution
Chemistry, Physics and Technology of Surface| Zusammenfassung: | The samples containing chromium, molybdenum and titanium on the base of stainless foil were prepared by low-temperature ionic implantation. The synthesized composites were studied by optical microscopy, atomic force microscopy and sclerometric analysis. Through computer simulation, formation of nanoscale layer on the carrier surface was shown. It has been found that the surface microgeometry of the samples depends on the applied target metal and the implantation dose. The dependence of surface microstructure vs implantation dose have the periodic view. The sclerometric analysis shows that implantation of metal ions allows us to increase in several times the surface mechanical strength in relation to the untreated foil. A perspective of the use of ionic implantation as a technology for preparation of surface nanolayers on the stainless steel was shown. This method can be used for obtaining of new materials with improved physical, chemical and operational characteristics. |
|---|