Синтез нанопорошків Ni та Cu методом електролізу
The preparation of ceramic composites based on metal nanopowders allows us to change significantly the thermal characteristics of the ceramic matrix, which is important for the creation of heat-conducting ceramics technology.The work establishes the most efficient method of obtaining nickel nanopowd...
Gespeichert in:
| Datum: | 2023 |
|---|---|
| Hauptverfasser: | Zolotarenko, Ol. D., Rudakova, E. P., Zolotarenko, An. D., Shvachko, N. A., Akhanova, N. Y., Ualkhanova, M., Schur, D. V., Lavrenko, V. A., Gabdullin, M. T., Zhirko, Yu. I., Zolotarenko, A. D., Tarasenko, Yu. O., Chymbai, M. V., Havryliuk, O. O. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Chuiko Institute of Surface Chemistry National Academy of Sciences of Ukraine
2023
|
| Schlagworte: | |
| Online Zugang: | https://www.cpts.com.ua/index.php/cpts/article/view/690 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Chemistry, Physics and Technology of Surface |
Institution
Chemistry, Physics and Technology of SurfaceÄhnliche Einträge
Вплив умов синтезу на властивості наночастинок заліза, отриманих методом хімічного осадження
von: Нгуєн, Тієн Хіеп, et al.
Veröffentlicht: (2023)
von: Нгуєн, Тієн Хіеп, et al.
Veröffentlicht: (2023)
Платиновмісні вуглецеві наноструктури для створення електропровідної кераміки при використанні 3D друку технології CJP
von: Zolotarenko, O. D., et al.
Veröffentlicht: (2022)
von: Zolotarenko, O. D., et al.
Veröffentlicht: (2022)
Наноструктуровані композити на основі осадженого кремнезему та кристалітів Ni, вкритих вуглецем із карбонізованого крохмалю
von: Gun'ko, V. M., et al.
Veröffentlicht: (2023)
von: Gun'ko, V. M., et al.
Veröffentlicht: (2023)
Synthesis of Ni and Cu nanopowders by electrolysis
von: Ol. D. Zolotarenko, et al.
Veröffentlicht: (2023)
von: Ol. D. Zolotarenko, et al.
Veröffentlicht: (2023)
ОСОБЛИВОСТІ ТЕХНОЛОГІЧНОГО ПРОЦЕСУ ФОРМУВАННЯ ЗАХИСНОГО ПОКРИТТЯ З МІКРО-, СУБМІКРО- ТА НАНОПОРОШКІВ КУБІЧНОГО НІТРИДУ БОРУ НА ПОВЕРХНІ ЗЕРЕН ШЛІФПОРОШКІВ СИНТЕТИЧНОГО АЛМАЗУ ПІДВИЩЕНОЇ МІЦНОСТІ
von: Полторацький, Володимир, et al.
Veröffentlicht: (2025)
von: Полторацький, Володимир, et al.
Veröffentlicht: (2025)
Нові магнієві інтерметаліди – перспективні, надійні, реверсивні накопичувачі водню
von: Matysina, Z. A., et al.
Veröffentlicht: (2023)
von: Matysina, Z. A., et al.
Veröffentlicht: (2023)
Comparative analysis of products of electric arc synthesis using graphite of different grades
von: O. D. Zolotarenko, et al.
Veröffentlicht: (2023)
von: O. D. Zolotarenko, et al.
Veröffentlicht: (2023)
Comparative analysis of products of electric arc synthesis using graphite of different grades
von: O. D. Zolotarenko, et al.
Veröffentlicht: (2023)
von: O. D. Zolotarenko, et al.
Veröffentlicht: (2023)
Особливості синтезу прямих та спіральних вуглецевих нанотрубок піролітичним методом
von: Zolotarenko, Ol. D., et al.
Veröffentlicht: (2023)
von: Zolotarenko, Ol. D., et al.
Veröffentlicht: (2023)
Interstitial impurities in alloys with B19 structure
von: S. Y. Zaginaichenko, et al.
Veröffentlicht: (2023)
von: S. Y. Zaginaichenko, et al.
Veröffentlicht: (2023)
ВПЛИВ МОДИФІКАЦІЇ ПОВЕРХНІ ЧАСТИНОК АЛМАЗНОГО НАНОПОРОШКУ ЗВ’ЯЗКАМИ С–W НА СПІКАННЯ ЗА ВИСОКОГО ТИСКУ НАНОКОМПОЗИТУ АЛМАЗ – КАРБІД ВОЛЬФРАМУ
von: Бочечка, Олександр, et al.
Veröffentlicht: (2023)
von: Бочечка, Олександр, et al.
Veröffentlicht: (2023)
ФОРМУВАННЯ ПОКРИТТЯ З НАНО-, СУБМІКРО-ТА МІКРОПОРОШКІВ КУБІЧНОГО НІТРИДУ БОРУ (CBN) НА ПОВЕРХНІ ЗЕРЕН ШЛІФПОРОШКІВ СИНТЕТИЧНОГО АЛМАЗУ ПІДВИЩЕНОЇ МІЦНОСТІ ДЛЯ ШЛІФУВАЛЬНОГО ІНСТРУМЕНТУ. ДОСЛІДЖЕННЯ ЦИХ ШЛІФПОРОШКІВ МЕТОДАМИ СКАНУВАЛЬНОЇ ЕЛЕКТРОННОЇ МІКРОС
von: Полторацький, Володимир, et al.
Veröffentlicht: (2025)
von: Полторацький, Володимир, et al.
Veröffentlicht: (2025)
Hydrogen in compounds and alloys with A15 structure
von: An. D. Zolotarenko, et al.
Veröffentlicht: (2023)
von: An. D. Zolotarenko, et al.
Veröffentlicht: (2023)
Порівняльний аналіз продуктів електродугового синтезу при використанні графіту різних марок
von: Zolotarenko, Ol.D., et al.
Veröffentlicht: (2023)
von: Zolotarenko, Ol.D., et al.
Veröffentlicht: (2023)
Електропровідні композити на основі TiO2 та вуглецевих наноструктур, виготовлені при використанні 3D друку технології CJP
von: Zolotarenk, Ol. D, et al.
Veröffentlicht: (2022)
von: Zolotarenk, Ol. D, et al.
Veröffentlicht: (2022)
On the solubility of hydrogen in metals and alloys
von: An. D. Zolotarenko, et al.
Veröffentlicht: (2023)
von: An. D. Zolotarenko, et al.
Veröffentlicht: (2023)
Creation of 3d-products using carbon nanostructures and 3d-printing technologies (FDM, CJP, SLA, SLS)
von: Ol. D. Zolotarenko, et al.
Veröffentlicht: (2023)
von: Ol. D. Zolotarenko, et al.
Veröffentlicht: (2023)
Crystalline potassium dihydrogen phosphate (KDP) powders
von: An. D. Zolotarenko, et al.
Veröffentlicht: (2023)
von: An. D. Zolotarenko, et al.
Veröffentlicht: (2023)
Synthesis of carbon nanostructures using cheap grades of graphite
von: Ol. D. Zolotarenko, et al.
Veröffentlicht: (2022)
von: Ol. D. Zolotarenko, et al.
Veröffentlicht: (2022)
Features of the synthesis of straight and spiral carbon nanotubes by the pyrolytic method
von: O. D. Zolotarenko, et al.
Veröffentlicht: (2023)
von: O. D. Zolotarenko, et al.
Veröffentlicht: (2023)
Modern methods of obtaining iron endofullerenes
von: Ol. D. Zolotarenko, et al.
Veröffentlicht: (2022)
von: Ol. D. Zolotarenko, et al.
Veröffentlicht: (2022)
Advantages and disadvantages of electric arc methods for the synthesis of carbon nanostructures
von: O. D. Zolotarenko, et al.
Veröffentlicht: (2022)
von: O. D. Zolotarenko, et al.
Veröffentlicht: (2022)
Electric arc methods to synthesize carbon nanostructures
von: Z. A. Matysina, et al.
Veröffentlicht: (2022)
von: Z. A. Matysina, et al.
Veröffentlicht: (2022)
Источник бескапельных плазменных потоков для наноэлектроники
von: Borisenko, A. G.
Veröffentlicht: (2013)
von: Borisenko, A. G.
Veröffentlicht: (2013)
Технологические источники ионов на основе контрагированных разрядов
von: Nikitinsky, V. A., et al.
Veröffentlicht: (2006)
von: Nikitinsky, V. A., et al.
Veröffentlicht: (2006)
Electrically conductive composites based on TiO2 and carbon nanostructures manufactured using 3D printing of CJP technology
von: Ol. D. Zolotarenko, et al.
Veröffentlicht: (2022)
von: Ol. D. Zolotarenko, et al.
Veröffentlicht: (2022)
Переваги та недоліки електродугових методів синтезу вуглецевих наноструктур
von: Zolotarenko, Ol. D, et al.
Veröffentlicht: (2026)
von: Zolotarenko, Ol. D, et al.
Veröffentlicht: (2026)
Домішки впровадження у сплавах зі структурою В19
von: Zaginaichenko, S.Yu., et al.
Veröffentlicht: (2023)
von: Zaginaichenko, S.Yu., et al.
Veröffentlicht: (2023)
Iron in endometallofullerenes
von: Z. A. Matysina, et al.
Veröffentlicht: (2022)
von: Z. A. Matysina, et al.
Veröffentlicht: (2022)
Perspective materials based on copper and carbon nanostructures
von: O. D. Zolotarenko
Veröffentlicht: (2015)
von: O. D. Zolotarenko
Veröffentlicht: (2015)
Формування катодних продуктів електролізу вольфраматномолібдатних розплавів
von: Малишев, В.В., et al.
Veröffentlicht: (2012)
von: Малишев, В.В., et al.
Veröffentlicht: (2012)
Хеміхромні властивості плівок NiOOH в розчинах формальдегіду
von: Fomanyuk, S. S., et al.
Veröffentlicht: (2018)
von: Fomanyuk, S. S., et al.
Veröffentlicht: (2018)
Атоми впровадження у кристалічній гексагональній структурі
von: Matysina, Z. A., et al.
Veröffentlicht: (2023)
von: Matysina, Z. A., et al.
Veröffentlicht: (2023)
Platinum-containing carbon nanostructures for the creation of electrically conductive ceramics using 3D printing of CJP technology
von: O. D. Zolotarenko, et al.
Veröffentlicht: (2022)
von: O. D. Zolotarenko, et al.
Veröffentlicht: (2022)
Використання спектрів поглинання для ідентифікації ендометалофуллеренів
von: Akhanova, N. Y., et al.
Veröffentlicht: (2020)
von: Akhanova, N. Y., et al.
Veröffentlicht: (2020)
Embedded atoms in a crystalline hexagonal structure
von: Z. A. Matysina, et al.
Veröffentlicht: (2023)
von: Z. A. Matysina, et al.
Veröffentlicht: (2023)
Особливості функціоналізації нанопорошків вуглецевих нанотрубок
von: Oliinyk, N. O., et al.
Veröffentlicht: (2019)
von: Oliinyk, N. O., et al.
Veröffentlicht: (2019)
Study of heat resistance of Me–S nanocomposites
von: A. D. Zolotarenko, et al.
Veröffentlicht: (2012)
von: A. D. Zolotarenko, et al.
Veröffentlicht: (2012)
Аналіз способів вводу наночасток в сплави на основі алюмінію
von: Треньов, М.С., et al.
Veröffentlicht: (2025)
von: Треньов, М.С., et al.
Veröffentlicht: (2025)
The mechanism of forming carbon nanostructures by electron arc-method
von: O. D. Zolotarenko, et al.
Veröffentlicht: (2020)
von: O. D. Zolotarenko, et al.
Veröffentlicht: (2020)
Ähnliche Einträge
-
Вплив умов синтезу на властивості наночастинок заліза, отриманих методом хімічного осадження
von: Нгуєн, Тієн Хіеп, et al.
Veröffentlicht: (2023) -
Платиновмісні вуглецеві наноструктури для створення електропровідної кераміки при використанні 3D друку технології CJP
von: Zolotarenko, O. D., et al.
Veröffentlicht: (2022) -
Наноструктуровані композити на основі осадженого кремнезему та кристалітів Ni, вкритих вуглецем із карбонізованого крохмалю
von: Gun'ko, V. M., et al.
Veröffentlicht: (2023) -
Synthesis of Ni and Cu nanopowders by electrolysis
von: Ol. D. Zolotarenko, et al.
Veröffentlicht: (2023) -
ОСОБЛИВОСТІ ТЕХНОЛОГІЧНОГО ПРОЦЕСУ ФОРМУВАННЯ ЗАХИСНОГО ПОКРИТТЯ З МІКРО-, СУБМІКРО- ТА НАНОПОРОШКІВ КУБІЧНОГО НІТРИДУ БОРУ НА ПОВЕРХНІ ЗЕРЕН ШЛІФПОРОШКІВ СИНТЕТИЧНОГО АЛМАЗУ ПІДВИЩЕНОЇ МІЦНОСТІ
von: Полторацький, Володимир, et al.
Veröffentlicht: (2025)