МОДЕЛЮВАННЯ НАПРУЖЕНО-ДЕФОРМОВАНОГО СТАНУ КОНТЕЙНЕРА ПРИ СТИСКУ ПУАНСОНАМИ КУБІЧНОГО ПРЕСА
A numerical technique for simulation of the compression of a pyrophyllite cube on anvils of a cubic press has been developed, stress-strain state of a cube has been studied and the peculiarities of the process have been defined.It is shown that the technique correctly describes the compression of th...
Збережено в:
| Дата: | 2018 |
|---|---|
| Автори: | , , , , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
Институт сверхтвердых материалов им. В. Н. Бакуля Национальной академии наук Украины
2018
|
| Теми: | |
| Онлайн доступ: | http://altis-ism.org.ua/index.php/ALTIS/article/view/53 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Tooling materials science |
Репозитарії
Tooling materials science| Резюме: | A numerical technique for simulation of the compression of a pyrophyllite cube on anvils of a cubic press has been developed, stress-strain state of a cube has been studied and the peculiarities of the process have been defined.It is shown that the technique correctly describes the compression of the pyrophyllite cube under high pressure, but at the same time requires an adjustment to take into account the deformation singularities in the contact region at the junction of the three anvils |
|---|