ЛИТЬЕ С КРИСТАЛИЗАЦИЕЙ ПОД ДАВЛЕНИЕМ АЛЮМИНИЕВЫХ СПЛАВОВ
the use of special types of casting in mechanical engineering allows to obtain high-quality blanks with enhanced mechanical properties. One of these methods is injection molding, which allows to obtain dense castings from all groups of casting aluminum alloys.
Збережено в:
| Дата: | 2018 |
|---|---|
| Автори: | , , , , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
National Academy of Sciences of Ukraine, Physical-Technological Institute of Metals and Alloys of NAS of Ukraine
2018
|
| Теми: | |
| Онлайн доступ: | https://plit-periodical.org.ua/index.php/plit/article/view/174 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Casting Processes |
Репозитарії
Casting Processes| Резюме: | the use of special types of casting in mechanical engineering allows to obtain high-quality blanks with enhanced mechanical properties. One of these methods is injection molding, which allows to obtain dense castings from all groups of casting aluminum alloys. |
|---|