Високоентропійні AlCoFeCrVNi та AlCoFeCrVTi сплави, отримані механічним легуванням і наступним спіканням
High-entropy AlCoFeCrVNi and AlCoFeCrVTi alloys were obtained by mechanical alloying and sintering, and it was shown that after mechanical alloying alloys consist mainly of BCC solid solutionі and insignificant amount of FCC solid solutionі, which are in a nanostructural state. After sintering in a...
Збережено в:
| Дата: | 2018 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
Physico- Technological Institute of Metals and Alloys of the NAS of Ukraine
2018
|
| Онлайн доступ: | https://momjournal.org.ua/index.php/mom/article/view/2018-4-5 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal Science and Treatment of Metals |
Репозитарії
Metal Science and Treatment of Metals| Резюме: | High-entropy AlCoFeCrVNi and AlCoFeCrVTi alloys were obtained by mechanical alloying and sintering, and it was shown that after mechanical alloying alloys consist mainly of BCC solid solutionі and insignificant amount of FCC solid solutionі, which are in a nanostructural state. After sintering in a vacuum the alloys consist of FCC solid solutions and precipitates of intermetallic and carbide phases. After sintering under high pressure alloys consist of FCC and BCC solid solutions and the FCC solid solution is a predominant phase in both alloys. Also sintering under high pressure allows keeping nanostructural state in AlCoFeCrVNi and AlCoFeCrVTi alloys and increased microhardness. |
|---|