Підвищення ефективності введення дисперсного матеріалу в розплав за умов лазерної обробки
Designed and implemented the design of mixing reactors, where there is a continuous formation of the suspension. Such reactors are distinguished by the imposition of mechanical rotation with the ability to control the kneading intensity, the number of particles that are introduced into the melt, the...
Gespeichert in:
| Datum: | 2018 |
|---|---|
| 1. Verfasser: | |
| Format: | Artikel |
| Sprache: | Ukrainisch |
| Veröffentlicht: |
Physico- Technological Institute of Metals and Alloys of the NAS of Ukraine
2018
|
| Online Zugang: | https://momjournal.org.ua/index.php/mom/article/view/2018-3-8 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Metal Science and Treatment of Metals |
Institution
Metal Science and Treatment of Metals| _version_ | 1856543761678467072 |
|---|---|
| author | Timoshenko, A. M. |
| author_facet | Timoshenko, A. M. |
| author_sort | Timoshenko, A. M. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2024-06-03T10:00:10Z |
| description | Designed and implemented the design of mixing reactors, where there is a continuous formation of the suspension. Such reactors are distinguished by the imposition of mechanical rotation with the ability to control the kneading intensity, the number of particles that are introduced into the melt, the formation of the vortex motion of the melt and the decrease in the volume of the melt in the reactor. Based on the physical and mathematical modeling of hydro- and gas-dynamic processes of formation of a suspension melt in mixing reactors, the dependences of the change in the shape of the free surface and the rate of fluid outflow from the reactor and the gas flows that are supplied. The effectiveness of the use of these reactors to obtain a dispersion-reinforced composite material based on aluminum and copper alloys has been established. |
| first_indexed | 2025-09-24T17:41:09Z |
| format | Article |
| id | oai:ojs2.localhost:article-245 |
| institution | Metal Science and Treatment of Metals |
| language | Ukrainian |
| last_indexed | 2025-12-17T12:07:40Z |
| publishDate | 2018 |
| publisher | Physico- Technological Institute of Metals and Alloys of the NAS of Ukraine |
| record_format | ojs |
| spelling | oai:ojs2.localhost:article-2452024-06-03T10:00:10Z Increasing the efficiency of the introduction of the disperse material into the melt under laser treatment conditions Підвищення ефективності введення дисперсного матеріалу в розплав за умов лазерної обробки Timoshenko, A. M. Designed and implemented the design of mixing reactors, where there is a continuous formation of the suspension. Such reactors are distinguished by the imposition of mechanical rotation with the ability to control the kneading intensity, the number of particles that are introduced into the melt, the formation of the vortex motion of the melt and the decrease in the volume of the melt in the reactor. Based on the physical and mathematical modeling of hydro- and gas-dynamic processes of formation of a suspension melt in mixing reactors, the dependences of the change in the shape of the free surface and the rate of fluid outflow from the reactor and the gas flows that are supplied. The effectiveness of the use of these reactors to obtain a dispersion-reinforced composite material based on aluminum and copper alloys has been established. Запропоновано та реалізовано конструкції реакторів змішування, де відбувається безперервне формування суспензії, які відрізняються накладанням механічного обертання з можливістю керування інтенсивністю замішування, кількістю частинок, що вводяться в розплав, утворенням вихрового руху розплаву та зменшенням об’єму розплаву в реакторі. На основі проведеного фізико-математичного моделювання гідро-, газодинамічних процесів формування суспензійного розплаву в реакторах змішання отримано залежності зміни форми вільної поверхні і швидкості витікання рідини з реактора від витрати рідинного потоку і газових потоків, що подаються, а також способу замішування. Встановлено, ефективність застосування даних реакторів для отримання дисперсно-армованого композиційного матеріалу на основі алюмінієвих і мідних сплавів Physico- Technological Institute of Metals and Alloys of the NAS of Ukraine 2018-09-30 Article Article Peer-reviewed Article application/pdf https://momjournal.org.ua/index.php/mom/article/view/2018-3-8 Scientific Technical Journal; Vol. 24 No. 3 (2018): The Scientific Technical journal Metal Science and Treatment of Metals; 30-31 Науково-технічний журнал; Том 24 № 3 (2018): Науково-технічний журнал Металознавство та обробка металів; 30-31 2664-2441 2073-9583 10.15407/mom2018.03 uk https://momjournal.org.ua/index.php/mom/article/view/2018-3-8/2018-3-8 Copyright (c) 2023 Scientific Technical Journal https://creativecommons.org/licenses/by-nc-nd/4.0 |
| spellingShingle | Timoshenko, A. M. Підвищення ефективності введення дисперсного матеріалу в розплав за умов лазерної обробки |
| title | Підвищення ефективності введення дисперсного матеріалу в розплав за умов лазерної обробки |
| title_alt | Increasing the efficiency of the introduction of the disperse material into the melt under laser treatment conditions |
| title_full | Підвищення ефективності введення дисперсного матеріалу в розплав за умов лазерної обробки |
| title_fullStr | Підвищення ефективності введення дисперсного матеріалу в розплав за умов лазерної обробки |
| title_full_unstemmed | Підвищення ефективності введення дисперсного матеріалу в розплав за умов лазерної обробки |
| title_short | Підвищення ефективності введення дисперсного матеріалу в розплав за умов лазерної обробки |
| title_sort | підвищення ефективності введення дисперсного матеріалу в розплав за умов лазерної обробки |
| url | https://momjournal.org.ua/index.php/mom/article/view/2018-3-8 |
| work_keys_str_mv | AT timoshenkoam increasingtheefficiencyoftheintroductionofthedispersematerialintothemeltunderlasertreatmentconditions AT timoshenkoam pídviŝennâefektivnostívvedennâdispersnogomateríaluvrozplavzaumovlazernoíobrobki |