РОЗРАХУНОК ПРОЦЕСІВ У ПЕРЕТВОРЮВАЧІ ЗІ ЗМЕНШЕНОЮ ПУЛЬСАЦІЄЮ ВИХІДНОЇ ПОСТІЙНОЇ НАПРУГИ

The electromagnetic processes in elementary dc converter according to the Luo topology with inverting output in  modes of continuous and discontinuous conduction were studied. Using the method of averaging in the state space based on Lagrange theorems, mathematical models of converter for m...

Повний опис

Збережено в:
Бібліографічні деталі
Дата:2023
Автор: Руденко, Ю.В.
Формат: Стаття
Мова:Ukrainian
Опубліковано: Інститут електродинаміки Національної академії наук України 2023
Теми:
Онлайн доступ:https://prc.ied.org.ua/index.php/proceedings/article/view/325
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine

Репозитарії

Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine
Опис
Резюме:The electromagnetic processes in elementary dc converter according to the Luo topology with inverting output in  modes of continuous and discontinuous conduction were studied. Using the method of averaging in the state space based on Lagrange theorems, mathematical models of converter for mentioned modes of operation have been developed. The use of developed models made it possible to obtain analytical expressions for calculating the average and pulsation values ​​of currents and voltages in the reactive elements of the converter, as well as their ripple coefficients. Graphical dependences of the mentioned parameters were calculated in the entire commutation range of converter, taking into account the conduction modes. It is shown that, in comparison with traditional topology of  buck-boost converter, the output filter in elementary Luo converter with inverting output significantly reduces the ripple coefficient of output voltage. It was determined that the amount of voltage ripple reduction is proportional to the product of the inductance and filter capacity values, as well as the square of the switching frequency and does not depend on the conductivity mode of the converter.