РОЗРАХУНОК ЕЛЕКТРОТЕПЛОВИХ ПРОЦЕСІВ В ІНДУКЦІЙНІЙ КАНАЛЬНІЙ ПЕЧІ В УСТАЛЕНОМУ РЕЖИМІ НА ОСНОВІ ТЕОРІЇ ТЕПЛОВИХ КІЛ
Based on the theory of thermal circuits, a computer model of an induction channel furnace has been developed, which is used to obtain industrial copper wire rods in the mode of continuous casting. The model allows calculating the established electrothermal processes considering the flows of cold and...
Gespeichert in:
| Datum: | 2021 |
|---|---|
| Hauptverfasser: | , , , , |
| Format: | Artikel |
| Sprache: | Ukrainian |
| Veröffentlicht: |
Інститут електродинаміки Національної академії наук України
2021
|
| Schlagworte: | |
| Online Zugang: | https://prc.ied.org.ua/index.php/proceedings/article/view/48 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine |
Institution
Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine| id |
oai:ojs2.prc.new-point.com.ua:article-48 |
|---|---|
| record_format |
ojs |
| spelling |
oai:ojs2.prc.new-point.com.ua:article-482022-09-02T05:08:01Z CALCULATION OF ELECTROTHERMAL PROCESSES IN THE INDUCTION CHANNEL FURNACE IN THE STEADY-STATE OPERATION BASED ON THE THEORY OF THERMAL CIRCUITS РОЗРАХУНОК ЕЛЕКТРОТЕПЛОВИХ ПРОЦЕСІВ В ІНДУКЦІЙНІЙ КАНАЛЬНІЙ ПЕЧІ В УСТАЛЕНОМУ РЕЖИМІ НА ОСНОВІ ТЕОРІЇ ТЕПЛОВИХ КІЛ Щерба, А.А. Подольцев, О.Д. Перетятко, Ю.В. Золотарьов, В.М. Білянін, Р.В. індукційна канальна піч електротеплові процеси теплові кола усталений режим розподіл температури induction channel furnace electrothermal processes thermal circles steady-state mode temperature distribution Based on the theory of thermal circuits, a computer model of an induction channel furnace has been developed, which is used to obtain industrial copper wire rods in the mode of continuous casting. The model allows calculating the established electrothermal processes considering the flows of cold and molten metal in its core. In the developed thermal model, it is proposed to consider the convection fluxes of heat in the metal using controlled current sources. The temperature distribution in the active zone of the channel furnace is calculated, and the influence of the mass flow of metal at the inlet and outlet of the furnace on the non-uniformity of temperature distribution in the active zone is shown. The obtained results allow determining the required electric power of the furnace at different values of the flow rate of the metal that moves continuously through its core while heating to a given temperature. The developed model is relatively easy to implement, using the Matlab/Simulink package, and allows online to estimate the melt temperature in different zones depending on the electric power consumed by the furnace and the metal consumption at the outlet of the furnace, as well as to determine rational modes of its operation. Ref. 7, fig. 4. На основі теорії теплових кіл розроблено комп’ютерну модель індукційної канальної печі, що використовується для отримання в режимі безперервного лиття мідної катанки промислового призначення. Модель дає змогурозраховувати усталені електротеплові процеси з урахуванням потоків холодного та розплавленого металу в її активній зоні. У розробленій тепловій моделі запропоновано враховувати конвекційні потоки теплоти в металі за допомогою керованих джерел струму. Проведено розрахунок розподілу температури в активній зоні канальної печі й показано вплив масової витрати металу на вході та виході з печі на нерівномірність розподілення температури в активній зоні. Одержані результати дають змогу визначати необхідну електричну потужність печі за різних значень витрати металу, що безперервно рухається крізь її активну зону, нагріваючись за цих обставин до заданої температури. Розроблена модель є відносно простою в реалізації, завдяки використанню для цього пакет Matlab/Simulink, і дає змогу в режимі on-line оцінювати температуру розплаву в різних зонах залежно від електричної потужності, що споживає піч, та витрати металу на виході з печі, а також визначати раціональні режими її роботи. Бібл. 7, рис. 4. Інститут електродинаміки Національної академії наук України 2021-12-10 Article Article reveiwing article рецензована стаття application/pdf https://prc.ied.org.ua/index.php/proceedings/article/view/48 10.15407/publishing2021.60.005 Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine; No. 60 (2021): Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine ; 005 Праці Інституту електродинаміки Національної академії наук України; № 60 (2021): Праці Інституту електродинаміки Національної академії наук України; 005 2786-7064 1727-9895 10.15407/publishing2021.60 uk https://prc.ied.org.ua/index.php/proceedings/article/view/48/35 Авторське право (c) 2021 А.А. Щерба, О.Д. Подольцев, Ю.В. Перетятко, В.М. Золотарьов, Р.В. Білянін https://creativecommons.org/licenses/by-nc-nd/4.0 |
| institution |
Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine |
| baseUrl_str |
|
| datestamp_date |
2022-09-02T05:08:01Z |
| collection |
OJS |
| language |
Ukrainian |
| topic |
індукційна канальна піч електротеплові процеси теплові кола усталений режим розподіл температури |
| spellingShingle |
індукційна канальна піч електротеплові процеси теплові кола усталений режим розподіл температури Щерба, А.А. Подольцев, О.Д. Перетятко, Ю.В. Золотарьов, В.М. Білянін, Р.В. РОЗРАХУНОК ЕЛЕКТРОТЕПЛОВИХ ПРОЦЕСІВ В ІНДУКЦІЙНІЙ КАНАЛЬНІЙ ПЕЧІ В УСТАЛЕНОМУ РЕЖИМІ НА ОСНОВІ ТЕОРІЇ ТЕПЛОВИХ КІЛ |
| topic_facet |
індукційна канальна піч електротеплові процеси теплові кола усталений режим розподіл температури induction channel furnace electrothermal processes thermal circles steady-state mode temperature distribution |
| format |
Article |
| author |
Щерба, А.А. Подольцев, О.Д. Перетятко, Ю.В. Золотарьов, В.М. Білянін, Р.В. |
| author_facet |
Щерба, А.А. Подольцев, О.Д. Перетятко, Ю.В. Золотарьов, В.М. Білянін, Р.В. |
| author_sort |
Щерба, А.А. |
| title |
РОЗРАХУНОК ЕЛЕКТРОТЕПЛОВИХ ПРОЦЕСІВ В ІНДУКЦІЙНІЙ КАНАЛЬНІЙ ПЕЧІ В УСТАЛЕНОМУ РЕЖИМІ НА ОСНОВІ ТЕОРІЇ ТЕПЛОВИХ КІЛ |
| title_short |
РОЗРАХУНОК ЕЛЕКТРОТЕПЛОВИХ ПРОЦЕСІВ В ІНДУКЦІЙНІЙ КАНАЛЬНІЙ ПЕЧІ В УСТАЛЕНОМУ РЕЖИМІ НА ОСНОВІ ТЕОРІЇ ТЕПЛОВИХ КІЛ |
| title_full |
РОЗРАХУНОК ЕЛЕКТРОТЕПЛОВИХ ПРОЦЕСІВ В ІНДУКЦІЙНІЙ КАНАЛЬНІЙ ПЕЧІ В УСТАЛЕНОМУ РЕЖИМІ НА ОСНОВІ ТЕОРІЇ ТЕПЛОВИХ КІЛ |
| title_fullStr |
РОЗРАХУНОК ЕЛЕКТРОТЕПЛОВИХ ПРОЦЕСІВ В ІНДУКЦІЙНІЙ КАНАЛЬНІЙ ПЕЧІ В УСТАЛЕНОМУ РЕЖИМІ НА ОСНОВІ ТЕОРІЇ ТЕПЛОВИХ КІЛ |
| title_full_unstemmed |
РОЗРАХУНОК ЕЛЕКТРОТЕПЛОВИХ ПРОЦЕСІВ В ІНДУКЦІЙНІЙ КАНАЛЬНІЙ ПЕЧІ В УСТАЛЕНОМУ РЕЖИМІ НА ОСНОВІ ТЕОРІЇ ТЕПЛОВИХ КІЛ |
| title_sort |
розрахунок електротеплових процесів в індукційній канальній печі в усталеному режимі на основі теорії теплових кіл |
| title_alt |
CALCULATION OF ELECTROTHERMAL PROCESSES IN THE INDUCTION CHANNEL FURNACE IN THE STEADY-STATE OPERATION BASED ON THE THEORY OF THERMAL CIRCUITS |
| description |
Based on the theory of thermal circuits, a computer model of an induction channel furnace has been developed, which is used to obtain industrial copper wire rods in the mode of continuous casting. The model allows calculating the established electrothermal processes considering the flows of cold and molten metal in its core. In the developed thermal model, it is proposed to consider the convection fluxes of heat in the metal using controlled current sources. The temperature distribution in the active zone of the channel furnace is calculated, and the influence of the mass flow of metal at the inlet and outlet of the furnace on the non-uniformity of temperature distribution in the active zone is shown. The obtained results allow determining the required electric power of the furnace at different values of the flow rate of the metal that moves continuously through its core while heating to a given temperature. The developed model is relatively easy to implement, using the Matlab/Simulink package, and allows online to estimate the melt temperature in different zones depending on the electric power consumed by the furnace and the metal consumption at the outlet of the furnace, as well as to determine rational modes of its operation. Ref. 7, fig. 4. |
| publisher |
Інститут електродинаміки Національної академії наук України |
| publishDate |
2021 |
| url |
https://prc.ied.org.ua/index.php/proceedings/article/view/48 |
| work_keys_str_mv |
AT ŝerbaaa calculationofelectrothermalprocessesintheinductionchannelfurnaceinthesteadystateoperationbasedonthetheoryofthermalcircuits AT podolʹcevod calculationofelectrothermalprocessesintheinductionchannelfurnaceinthesteadystateoperationbasedonthetheoryofthermalcircuits AT peretâtkoûv calculationofelectrothermalprocessesintheinductionchannelfurnaceinthesteadystateoperationbasedonthetheoryofthermalcircuits AT zolotarʹovvm calculationofelectrothermalprocessesintheinductionchannelfurnaceinthesteadystateoperationbasedonthetheoryofthermalcircuits AT bílânínrv calculationofelectrothermalprocessesintheinductionchannelfurnaceinthesteadystateoperationbasedonthetheoryofthermalcircuits AT ŝerbaaa rozrahunokelektroteplovihprocesívvíndukcíjníjkanalʹníjpečívustalenomurežimínaosnovíteorííteplovihkíl AT podolʹcevod rozrahunokelektroteplovihprocesívvíndukcíjníjkanalʹníjpečívustalenomurežimínaosnovíteorííteplovihkíl AT peretâtkoûv rozrahunokelektroteplovihprocesívvíndukcíjníjkanalʹníjpečívustalenomurežimínaosnovíteorííteplovihkíl AT zolotarʹovvm rozrahunokelektroteplovihprocesívvíndukcíjníjkanalʹníjpečívustalenomurežimínaosnovíteorííteplovihkíl AT bílânínrv rozrahunokelektroteplovihprocesívvíndukcíjníjkanalʹníjpečívustalenomurežimínaosnovíteorííteplovihkíl |
| first_indexed |
2025-09-24T17:31:22Z |
| last_indexed |
2025-09-24T17:31:22Z |
| _version_ |
1850410171650539520 |