ЗАЛЕЖНІСТЬ КІЛЬКОСТІ ПЕРЕМИКАНЬ, НЕОБХІДНИХ ДЛЯ ДОСЯГНЕННЯ УСТАЛЕНОГО РЕЖИМУ, ПРИ РЕВЕРСУВАННІ РЕАКТИВНОГО ЕЛЕМЕНТА В RLC-КОЛІ СИНУСОЇДНОЇ НАПРУГИ ВІД ПАРАМЕТРІВ КОЛА ТА ПЕРІОДУ КЕРУЮЧОГО СИГНАЛУ
Investigations on processes occurring under symmetric and asymmetric reversal of reactive component in an RLC-circuit of sinusoidal voltage at different values of its parameters L and C, period of control switching and input signal period, have been made. It has been identified that the number of sw...
Gespeichert in:
| Datum: | 2011 |
|---|---|
| Hauptverfasser: | , |
| Format: | Artikel |
| Sprache: | Ukrainian |
| Veröffentlicht: |
Інститут електродинаміки НАН України, Київ
2011
|
| Schlagworte: | |
| Online Zugang: | https://techned.org.ua/index.php/techned/article/view/1466 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Technical Electrodynamics |
Institution
Technical Electrodynamics| Zusammenfassung: | Investigations on processes occurring under symmetric and asymmetric reversal of reactive component in an RLC-circuit of sinusoidal voltage at different values of its parameters L and C, period of control switching and input signal period, have been made. It has been identified that the number of switches required for reaching of steady state by the process essentially depends on circuit parameters, signal period of switching control and symmetry of control process. Parameters of a circuit and control pulses under which the process is balancing at a minimum number of reversal have been defined. References 3, figures 3. |
|---|