ЗАСТОСУВАННЯ КЕРОВАНИХ ПРИСТРОЇВ КОМПЕНСАЦІЇ ЗАРЯДНОЇ ПОТУЖНОСТІ ЛЕП НВН В ЕЛЕКТРИЧНИХ МЕРЕЖАХ
It is shown that the use of controlled shunt reactors allows you to create FACTS-controlled power lines based on extra-high voltage power lines that meet the necessary requirements of modern energy systems to control normal conditions. The typical modes of operation of an ultra-high voltage power li...
Збережено в:
| Дата: | 2021 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
Інститут електродинаміки НАН України, Київ
2021
|
| Теми: | |
| Онлайн доступ: | https://techned.org.ua/index.php/techned/article/view/264 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Technical Electrodynamics |
Репозитарії
Technical Electrodynamics| Резюме: | It is shown that the use of controlled shunt reactors allows you to create FACTS-controlled power lines based on extra-high voltage power lines that meet the necessary requirements of modern energy systems to control normal conditions. The typical modes of operation of an ultra-high voltage power line with installed controlled shunt reactors are analyzed. The efficiency of using controlled shunt reactors to increase the reliability of single-phase auto-reclosing is shown. The issues of the appearance of an aperiodic component in the current when disconnecting the line of SF6 circuit breakers are considered. It is shown that the presence of a ferromagnetic core in controlled shunt reactors causes the appearance of transition resonance, which must be taken into account when designing the FACTS. References 10, figures 1, tables 1. |
|---|