ВИБІР ПАРАМЕТРІВ ЕЛЕКТРОМЕХАНІЧНОГО ПЕРЕТВОРЮВАЧА ІНДУКЦІЙНОГО ТИПУ ДЛЯ ЕЛЕКТРОДИНАМІЧНОЇ ОБРОБКИ ЗВАРНИХ З’ЄДНАНЬ
The features of electromechanics transformer construction of induction type are specified at application of it in a technological complex for electrodynamic treatment of the weld-fabricated connections, that consists in the simultaneous operating on a small limit area of surface of the weld-fabricat...
Gespeichert in:
| Datum: | 2017 |
|---|---|
| Hauptverfasser: | , , , |
| Format: | Artikel |
| Sprache: | Ukrainian |
| Veröffentlicht: |
Інститут електродинаміки НАН України, Київ
2017
|
| Schlagworte: | |
| Online Zugang: | https://techned.org.ua/index.php/techned/article/view/761 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Technical Electrodynamics |
Institution
Technical Electrodynamics| Zusammenfassung: | The features of electromechanics transformer construction of induction type are specified at application of it in a technological complex for electrodynamic treatment of the weld-fabricated connections, that consists in the simultaneous operating on a small limit area of surface of the weld-fabricated joint by impulsive electric current and mechanical force. Magnitude of current density and force, at which transformation of mechanical descriptions environments is possible, are indicated. Interrelationships of structural parameters of electromechanics transformer with by the size of electrodynamic force and current density at the set voltage magnitude on a capacity storage and width of discharge process are defined. It is defined that the diameter of contact mark at electrodynamic treatment of the weld-fabricated joints from aluminium alloys must make 2 - 2,5 mm. References 7, figures 5. |
|---|