Buchumschlag

Малогабаритный стробоскопический блок с пониженным энергопотреблением

Ways to reduce supply voltage, lower power consumption, and minimize dimensions of the stroboscopic unit are considered. The proposed solutions allow reducing the supply voltage of the stroboscopic unit to ±5 V and decreasing the consumed current to 62.3 mA. To reduce the dimensions of the unit, it...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Datum:2003
Автори та афіліації:
  • V. P. Ruban — A. Ya. Usikov Institute of Radiophysics and Electronics of the National Academy of Sciences of Ukraine, Kharkiv, Ukraine
  • P. V. Kholod — A. Ya. Usikov Institute of Radiophysics and Electronics of the National Academy of Sciences of Ukraine, Kharkiv, Ukraine
Ключові слова:keywords
Hauptverfasser: Ruban, V. P., Kholod, P. V.
Format: Artikel
Sprache:Ukrainisch
Veröffentlicht: PE "Politekhperiodika", Book and Journal Publishers 2003
Schlagworte:
малогабаритный стробоскопический блок
пониженное энергопотребление
формирователь строб-импульсов на щелевой линии
Online Zugang:https://www.tkea.com.ua/index.php/journal/article/view/TKEA2003.3.41
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:Technology and design in electronic equipment
Завантажити файл: Pdf

Institution

Technology and design in electronic equipment
Beschreibung
Zusammenfassung:Ways to reduce supply voltage, lower power consumption, and minimize dimensions of the stroboscopic unit are considered. The proposed solutions allow reducing the supply voltage of the stroboscopic unit to ±5 V and decreasing the consumed current to 62.3 mA. To reduce the dimensions of the unit, it is proposed to use a strobe pulse shaper based on a slot line, which makes it possible to place the stroboscopic unit in a volume of 30×120×10 mm.

Ähnliche Einträge