Планарные взаимоиндуктивные сенсоры для датчиков положения и приближения
Preliminary unbalancing of an inductive balanced sensor by bringing the coils closer relative to the balance position leads to a decrease in the output voltage as a conductive plate approaches the sensor. In this case, the sensitivity of the sensor increases several times, but the sensitivity zone d...
Збережено в:
| Опубліковано в: | Технологія та конструювання в електронній апаратурі |
|---|---|
| Дата: | 2002 |
| Випуск: | 4–5 |
| Сторінки: | 47-49 |
| ISSN: | 3083-6549 |
| Автори та афіліації: |
|
| Автори: | , |
| Формат: | Стаття |
| Мова: | yo |
| Опубліковано: |
PE "Politekhperiodika", Book and Journal Publishers
2002
|
| Теми: | |
| Онлайн доступ: | https://www.tkea.com.ua/index.php/journal/article/view/TKEA2002.4-5.47 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Technology and design in electronic equipment |
| Завантажити файл: |
|
Репозитарії
Technology and design in electronic equipment| Резюме: | Preliminary unbalancing of an inductive balanced sensor by bringing the coils closer relative to the balance position leads to a decrease in the output voltage as a conductive plate approaches the sensor. In this case, the sensitivity of the sensor increases several times, but the sensitivity zone decreases. Sensitivity increases tens of times when using unbalanced planar mutual-inductive sensors. |
|---|---|
| ISSN: | 3083-6549 |