Балансування напруги модульного накопичувача енергії джерела живлення для контактного мікрозварювання
Micro resistance welding is one of the most effective ways to obtain permanent joints of metal parts. The quality of welded joints strongly depends on the characteristics of the power supply of welding equipment. The power supplies for micro resistance welding based on Energy Storage topology have a...
Збережено в:
| Дата: | 2017 |
|---|---|
| Автори: | , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
PE "Politekhperiodika", Book and Journal Publishers
2017
|
| Теми: | |
| Онлайн доступ: | https://www.tkea.com.ua/index.php/journal/article/view/TKEA2017.4-5.15 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Technology and design in electronic equipment |
Репозитарії
Technology and design in electronic equipment| id |
oai:tkea.com.ua:article-189 |
|---|---|
| record_format |
ojs |
| spelling |
oai:tkea.com.ua:article-1892025-05-30T19:29:12Z Voltage balancing in modular energy storage of power supply for micro resistance welding Балансування напруги модульного накопичувача енергії джерела живлення для контактного мікрозварювання Kozhushko, Yu. V. Bondarenko, O. F. micro resistance welding energy storage supercapacitor voltage balancing pulse converter контактне мікрозварювання накопичувач енергії суперконденсатор балансування напруги імпульсний перетворювач Micro resistance welding is one of the most effective ways to obtain permanent joints of metal parts. The quality of welded joints strongly depends on the characteristics of the power supply of welding equipment. The power supplies for micro resistance welding based on Energy Storage topology have a softer impact on the network than the ones based on Direct Energy topology. The use of supercapacitors for Energy Storage type power supplies makes it possible to reduce the dimensions of welding equipment and to improve its technical parameters. However, the feature of the supercapacitors is low value of the nominal voltage, which usually does not exceed 3 V. To provide higher voltage, the modules of supercapacitors connected in series are designed. In order to extend the lifetime of such modules, a voltage balancing system is required.A circuit for balancing the voltage of a modular supercapacitor energy storage of a power supply for micro resistance welding is proposed. The fragments of calculation of control units of a supercapacitor module cell are given. The simulation of the balancing circuit operation is carried out and time charts of the supercapacitor charge process are obtained. The operability and effectiveness of the proposed solution is confirmed. The advantage of the proposed circuit is the possibility of obtaining the high efficiency because of returning the excessive energy of the module cell back into the power supply. Запропоновано схемне рішення для балансування напруги модульного накопичувача енергії на основі суперконденсаторів джерела живлення для контактного мікрозварювання. Наведено формули для розрахунку вузлів керування окремої комірки суперконденсаторного модуля. Проведено моделювання роботи схеми балансування напруги модуля та отримано часові діаграми процесу заряду суперконденсатора. Підтверджено працездатність та ефективність запропонованого рішення. PE "Politekhperiodika", Book and Journal Publishers 2017-10-28 Article Article Peer-reviewed Article application/pdf https://www.tkea.com.ua/index.php/journal/article/view/TKEA2017.4-5.15 10.15222/TKEA2017.4-5.15 Technology and design in electronic equipment; No. 4–5 (2017): Tekhnologiya i konstruirovanie v elektronnoi apparature; 15-23 Технологія та конструювання в електронній апаратурі; № 4–5 (2017): Технология и конструирование в электронной аппаратуре; 15-23 3083-6549 3083-6530 10.15222/TKEA2017.4-5 uk https://www.tkea.com.ua/index.php/journal/article/view/TKEA2017.4-5.15/169 Copyright (c) 2017 Kozhushko Yu. V., Bondarenko O. F. http://creativecommons.org/licenses/by/4.0/ |
| institution |
Technology and design in electronic equipment |
| baseUrl_str |
|
| datestamp_date |
2025-05-30T19:29:12Z |
| collection |
OJS |
| language |
Ukrainian |
| topic |
контактне мікрозварювання накопичувач енергії суперконденсатор балансування напруги імпульсний перетворювач |
| spellingShingle |
контактне мікрозварювання накопичувач енергії суперконденсатор балансування напруги імпульсний перетворювач Kozhushko, Yu. V. Bondarenko, O. F. Балансування напруги модульного накопичувача енергії джерела живлення для контактного мікрозварювання |
| topic_facet |
micro resistance welding energy storage supercapacitor voltage balancing pulse converter контактне мікрозварювання накопичувач енергії суперконденсатор балансування напруги імпульсний перетворювач |
| format |
Article |
| author |
Kozhushko, Yu. V. Bondarenko, O. F. |
| author_facet |
Kozhushko, Yu. V. Bondarenko, O. F. |
| author_sort |
Kozhushko, Yu. V. |
| title |
Балансування напруги модульного накопичувача енергії джерела живлення для контактного мікрозварювання |
| title_short |
Балансування напруги модульного накопичувача енергії джерела живлення для контактного мікрозварювання |
| title_full |
Балансування напруги модульного накопичувача енергії джерела живлення для контактного мікрозварювання |
| title_fullStr |
Балансування напруги модульного накопичувача енергії джерела живлення для контактного мікрозварювання |
| title_full_unstemmed |
Балансування напруги модульного накопичувача енергії джерела живлення для контактного мікрозварювання |
| title_sort |
балансування напруги модульного накопичувача енергії джерела живлення для контактного мікрозварювання |
| title_alt |
Voltage balancing in modular energy storage of power supply for micro resistance welding |
| description |
Micro resistance welding is one of the most effective ways to obtain permanent joints of metal parts. The quality of welded joints strongly depends on the characteristics of the power supply of welding equipment. The power supplies for micro resistance welding based on Energy Storage topology have a softer impact on the network than the ones based on Direct Energy topology. The use of supercapacitors for Energy Storage type power supplies makes it possible to reduce the dimensions of welding equipment and to improve its technical parameters. However, the feature of the supercapacitors is low value of the nominal voltage, which usually does not exceed 3 V. To provide higher voltage, the modules of supercapacitors connected in series are designed. In order to extend the lifetime of such modules, a voltage balancing system is required.A circuit for balancing the voltage of a modular supercapacitor energy storage of a power supply for micro resistance welding is proposed. The fragments of calculation of control units of a supercapacitor module cell are given. The simulation of the balancing circuit operation is carried out and time charts of the supercapacitor charge process are obtained. The operability and effectiveness of the proposed solution is confirmed. The advantage of the proposed circuit is the possibility of obtaining the high efficiency because of returning the excessive energy of the module cell back into the power supply. |
| publisher |
PE "Politekhperiodika", Book and Journal Publishers |
| publishDate |
2017 |
| url |
https://www.tkea.com.ua/index.php/journal/article/view/TKEA2017.4-5.15 |
| work_keys_str_mv |
AT kozhushkoyuv voltagebalancinginmodularenergystorageofpowersupplyformicroresistancewelding AT bondarenkoof voltagebalancinginmodularenergystorageofpowersupplyformicroresistancewelding AT kozhushkoyuv balansuvannânaprugimodulʹnogonakopičuvačaenergíídžerelaživlennâdlâkontaktnogomíkrozvarûvannâ AT bondarenkoof balansuvannânaprugimodulʹnogonakopičuvačaenergíídžerelaživlennâdlâkontaktnogomíkrozvarûvannâ |
| first_indexed |
2025-09-24T17:30:31Z |
| last_indexed |
2025-09-24T17:30:31Z |
| _version_ |
1850410220910542848 |