Охлаждение светодиодного модуля с помощью различных теплоотводов

The given article presents the results of an experimental comparison of three radiators which are: pressed radiator made of aluminum plate (basic variant), radiator made of copper wire, and copper/water pulsating heat pipe. The radiators are intended to take off heat from the LED module with the pow...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Datum:2015
Hauptverfasser: Naumova, A. M., Nikolaenko, Yu. E., Kravets, V. Yu., Sorokin, V. M., Oliinyk, O. S.
Format: Artikel
Sprache:Ukrainian
Veröffentlicht: PE "Politekhperiodika", Book and Journal Publishers 2015
Schlagworte:
Online Zugang:https://www.tkea.com.ua/index.php/journal/article/view/TKEA2015.5-6.35
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:Technology and design in electronic equipment

Institution

Technology and design in electronic equipment
id oai:tkea.com.ua:article-262
record_format ojs
spelling oai:tkea.com.ua:article-2622025-05-30T19:32:05Z Cooling of led module by various radiators Охлаждение светодиодного модуля с помощью различных теплоотводов Naumova, A. M. Nikolaenko, Yu. E. Kravets, V. Yu. Sorokin, V. M. Oliinyk, O. S. LED module heat sink radiator pulsating heat pipe temperature светодиодный модуль теплоотвод радиатор пульсационная тепловая труба температура The given article presents the results of an experimental comparison of three radiators which are: pressed radiator made of aluminum plate (basic variant), radiator made of copper wire, and copper/water pulsating heat pipe. The radiators are intended to take off heat from the LED module with the power capacity of 10,55 W. It is established that under natural convection all three radiators can keep temperature level of the circuit board module less than 64 C that lies within the operating range. In comparison with basic variant, the use of the copper wire radiator allows lowering of the temperature in the LED module center to 3.9 C, and the same value for the pulsating heat pipe is 7.1 C. Приведены результаты экспериментального сравнения тепловых характеристик трех теплоотводов: штампованного из алюминиевого листа (базовый вариант), на основе медно-водяной пульсационной тепловой трубы и на основе медного проволочного радиатора, с помощью которых охлаждался светодиодный модуль мощностью 10,55 Вт. Установлено, что все исследованные теплоотводы обеспечивают температуру не выше 64°С в местах установки светодиодов в условиях естественной конвекции, при этом использование медного проволочного радиатора позволяет снизить температуру в центре печатной платы модуля на 3,9°С по сравнению с базовым вариантом, а использование теплоотвода на основе пульсационной тепловой трубы — на 7,1°С. PE "Politekhperiodika", Book and Journal Publishers 2015-12-25 Article Article Peer-reviewed Article application/pdf https://www.tkea.com.ua/index.php/journal/article/view/TKEA2015.5-6.35 10.15222/TKEA2015.5-6.35 Technology and design in electronic equipment; No. 5–6 (2015): Tekhnologiya i konstruirovanie v elektronnoi apparature; 35-40 Технологія та конструювання в електронній апаратурі; № 5–6 (2015): Технология и конструирование в электронной аппаратуре; 35-40 3083-6549 3083-6530 uk https://www.tkea.com.ua/index.php/journal/article/view/TKEA2015.5-6.35/230 Copyright (c) 2015 Naumova A. M., Nikolaenko Yu. E., Kravets V. Yu., Sorokin V. M., Oliinyk O. S. http://creativecommons.org/licenses/by/4.0/
institution Technology and design in electronic equipment
baseUrl_str
datestamp_date 2025-05-30T19:32:05Z
collection OJS
language Ukrainian
topic светодиодный модуль
теплоотвод
радиатор
пульсационная тепловая труба
температура
spellingShingle светодиодный модуль
теплоотвод
радиатор
пульсационная тепловая труба
температура
Naumova, A. M.
Nikolaenko, Yu. E.
Kravets, V. Yu.
Sorokin, V. M.
Oliinyk, O. S.
Охлаждение светодиодного модуля с помощью различных теплоотводов
topic_facet LED module
heat sink
radiator
pulsating heat pipe
temperature
светодиодный модуль
теплоотвод
радиатор
пульсационная тепловая труба
температура
format Article
author Naumova, A. M.
Nikolaenko, Yu. E.
Kravets, V. Yu.
Sorokin, V. M.
Oliinyk, O. S.
author_facet Naumova, A. M.
Nikolaenko, Yu. E.
Kravets, V. Yu.
Sorokin, V. M.
Oliinyk, O. S.
author_sort Naumova, A. M.
title Охлаждение светодиодного модуля с помощью различных теплоотводов
title_short Охлаждение светодиодного модуля с помощью различных теплоотводов
title_full Охлаждение светодиодного модуля с помощью различных теплоотводов
title_fullStr Охлаждение светодиодного модуля с помощью различных теплоотводов
title_full_unstemmed Охлаждение светодиодного модуля с помощью различных теплоотводов
title_sort охлаждение светодиодного модуля с помощью различных теплоотводов
title_alt Cooling of led module by various radiators
description The given article presents the results of an experimental comparison of three radiators which are: pressed radiator made of aluminum plate (basic variant), radiator made of copper wire, and copper/water pulsating heat pipe. The radiators are intended to take off heat from the LED module with the power capacity of 10,55 W. It is established that under natural convection all three radiators can keep temperature level of the circuit board module less than 64 C that lies within the operating range. In comparison with basic variant, the use of the copper wire radiator allows lowering of the temperature in the LED module center to 3.9 C, and the same value for the pulsating heat pipe is 7.1 C.
publisher PE "Politekhperiodika", Book and Journal Publishers
publishDate 2015
url https://www.tkea.com.ua/index.php/journal/article/view/TKEA2015.5-6.35
work_keys_str_mv AT naumovaam coolingofledmodulebyvariousradiators
AT nikolaenkoyue coolingofledmodulebyvariousradiators
AT kravetsvyu coolingofledmodulebyvariousradiators
AT sorokinvm coolingofledmodulebyvariousradiators
AT oliinykos coolingofledmodulebyvariousradiators
AT naumovaam ohlaždeniesvetodiodnogomodulâspomoŝʹûrazličnyhteplootvodov
AT nikolaenkoyue ohlaždeniesvetodiodnogomodulâspomoŝʹûrazličnyhteplootvodov
AT kravetsvyu ohlaždeniesvetodiodnogomodulâspomoŝʹûrazličnyhteplootvodov
AT sorokinvm ohlaždeniesvetodiodnogomodulâspomoŝʹûrazličnyhteplootvodov
AT oliinykos ohlaždeniesvetodiodnogomodulâspomoŝʹûrazličnyhteplootvodov
first_indexed 2025-09-24T17:30:38Z
last_indexed 2025-09-24T17:30:38Z
_version_ 1844167351436574720