Обеспечение заданной длины проводников в САПР TopoR
This article introduces mathematical models and algorithm for calculation of wire shapes of specified length, which are inscribed in an arbitrary trapezium. This helps to save workspace, which is especially important for any-angle routing. The presented algorithm allows maintaining the defined wire...
Збережено в:
| Дата: | 2009 |
|---|---|
| Автори: | , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
PE "Politekhperiodika", Book and Journal Publishers
2009
|
| Теми: | |
| Онлайн доступ: | https://www.tkea.com.ua/index.php/journal/article/view/TKEA2009.4.03 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Technology and design in electronic equipment |
Репозитарії
Technology and design in electronic equipment| Резюме: | This article introduces mathematical models and algorithm for calculation of wire shapes of specified length, which are inscribed in an arbitrary trapezium. This helps to save workspace, which is especially important for any-angle routing. The presented algorithm allows maintaining the defined wire length with a maximum tolerance of 50 nm. For compatibility with CAD formats that do not support arc-shaped wires, TopoR creates approximated snake-like connections made up of straight lines only. |
|---|