Формирователи импульсов тока для контактной сварки
An analysis and generalization of the principles of designing current pulse shapers for spot welding has been carried out, taking into account modern trends in its development. The main features have been identified, and a contemporary classification of devices has been compiled. Using the proposed...
Збережено в:
| Дата: | 2008 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
PE "Politekhperiodika", Book and Journal Publishers
2008
|
| Теми: | |
| Онлайн доступ: | https://www.tkea.com.ua/index.php/journal/article/view/TKEA2008.3.25 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Technology and design in electronic equipment |
Репозитарії
Technology and design in electronic equipment| Резюме: | An analysis and generalization of the principles of designing current pulse shapers for spot welding has been carried out, taking into account modern trends in its development. The main features have been identified, and a contemporary classification of devices has been compiled. Using the proposed classification scheme, the most promising principle for constructing pulse shapers for micro-welding has been highlighted — a transformerless pulse shaper with energy accumulation based on transistor regulators operating in active mode. |
|---|