Влияние плазмохимического травления на структуру поверхности кремниевых пластин фотоэлектрических преобразователей
The results of plasma-chemical etching (PCE) of the surface of photovoltaic converter (PVC) wafers, pre-structured by chemical etching, are presented. PCE was carried out in a plasma-chemical reactor using a mixture of sulfur hexafluoride (SF₆) and 10% oxygen. Mass spectrometry demonstrated high eff...
Збережено в:
| Дата: | 2006 |
|---|---|
| Автори: | , , , , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
PE "Politekhperiodika", Book and Journal Publishers
2006
|
| Теми: | |
| Онлайн доступ: | https://www.tkea.com.ua/index.php/journal/article/view/TKEA2006.2.52 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Technology and design in electronic equipment |
Репозитарії
Technology and design in electronic equipment| Резюме: | The results of plasma-chemical etching (PCE) of the surface of photovoltaic converter (PVC) wafers, pre-structured by chemical etching, are presented. PCE was carried out in a plasma-chemical reactor using a mixture of sulfur hexafluoride (SF₆) and 10% oxygen. Mass spectrometry demonstrated high efficiency of working gas utilization in the reactor. Electron microscopy studies revealed varying degrees of surface structure modification depending on etching time. As a result of short-term treatment of the silicon wafer surface, its interaction with light is enhanced — the short-circuit current increases by 5.5%, and the efficiency of the PVC rises from 12% to 13%. |
|---|