Аналіз вимог до системи контролю витрат газу в розподільних газопроводах

The article deals with the main requirements for the gas flow control system in regional gas pipelines specified by regulatory documents. Particular attention is paid to the requirements of the technical regulations on measuring instruments and state standards of Ukraine for measuring equipment at n...

Повний опис

Збережено в:
Бібліографічні деталі
Дата:2024
Автори: Petrushenko, Sergii, Zaporozhets, Artur
Формат: Стаття
Мова:Ukrainian
Опубліковано: General Energy Institute of the National Academy of Sciences of Ukraine 2024
Теми:
Онлайн доступ:https://systemre.org/index.php/journal/article/view/873
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:System Research in Energy

Репозитарії

System Research in Energy
Опис
Резюме:The article deals with the main requirements for the gas flow control system in regional gas pipelines specified by regulatory documents. Particular attention is paid to the requirements of the technical regulations on measuring instruments and state standards of Ukraine for measuring equipment at natural gas metering units, such as gas meters, calculators and volume correctors. The requirements for the climatic operating conditions and power supply of these devices are determined. It is shown that safety during the operation of equipment containing electronic and electrical components in explosive environments is achieved through the use of intrinsically spark barriers. Possible data acquisition and communication technologies that ensure continuous monitoring, rapid fault detection and remote control are considered. In particular, automated data acquisition systems (SCADA) and programmable logic controllers (PLC) are considered, which allow operators to obtain accurate real time data, analyze it and make informed management decisions It is noted that based on the analysis of data stored in the memory of gas metering equipment, using mathematical models, it is possible to perform predictive calculations of consumer gas consumption depending on operating conditions and internal factors such as temperature, pressure and consumption volume.