Аналіз вимог до системи контролю витрат газу в розподільних газопроводах

The article deals with the main requirements for the gas flow control system in regional gas pipelines specified by regulatory documents. Particular attention is paid to the requirements of the technical regulations on measuring instruments and state standards of Ukraine for measuring equipment at n...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Datum:2024
Hauptverfasser: Petrushenko, Sergii, Zaporozhets, Artur
Format: Artikel
Sprache:Ukrainian
Veröffentlicht: General Energy Institute of the National Academy of Sciences of Ukraine 2024
Schlagworte:
Online Zugang:https://systemre.org/index.php/journal/article/view/873
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:System Research in Energy

Institution

System Research in Energy
Beschreibung
Zusammenfassung:The article deals with the main requirements for the gas flow control system in regional gas pipelines specified by regulatory documents. Particular attention is paid to the requirements of the technical regulations on measuring instruments and state standards of Ukraine for measuring equipment at natural gas metering units, such as gas meters, calculators and volume correctors. The requirements for the climatic operating conditions and power supply of these devices are determined. It is shown that safety during the operation of equipment containing electronic and electrical components in explosive environments is achieved through the use of intrinsically spark barriers. Possible data acquisition and communication technologies that ensure continuous monitoring, rapid fault detection and remote control are considered. In particular, automated data acquisition systems (SCADA) and programmable logic controllers (PLC) are considered, which allow operators to obtain accurate real time data, analyze it and make informed management decisions It is noted that based on the analysis of data stored in the memory of gas metering equipment, using mathematical models, it is possible to perform predictive calculations of consumer gas consumption depending on operating conditions and internal factors such as temperature, pressure and consumption volume.