Cover Image

Structural state of quick- hardened brazing alloy Cu–Ti

Saved in:

Bibliographic Details
Date:	2010
Main Authors:	S. V. Maksimova, V. F. Khorunov, G. M. Zelinskaja
Format:	Article
Language:	English
Published:	2010
Series:	Automatic Welding
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000465657
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Brazing of titanium aluminide by rapidly-hardened strips
by: S. V. Maksimova, et al.
Published: (2010)

Brazing alloys of Ti–Zr–(Fe, Mn, Co) system for brazing of titanium alloys
by: V. F. Khorunov, et al.
Published: (2013)

Effect of gap value and initial state of brazing alloy of structure formation of titanium alloy brazed joints
by: S. V. Maksimova, et al.
Published: (2013)

Brazing of titanium alloys using brazing alloys based on aluminium
by: V. F. Khorunov, et al.
Published: (2012)

The effect of tin fillers on structure and technological properties of brazing alloys of Ag-Cu-Zn system
by: V. F. Khorunov, et al.
Published: (2010)

Effect of nickel and manganese on structure of alloys of Ag–Cu–Zn–Sn system and strength of brazed joints
by: V. F. Khorunov, et al.
Published: (2014)

Investigation of structure and phase composition of alloys based on Ti-Zr-Fe system
by: V. F. Khorunov, et al.
Published: (2010)

Structure of joints of heat-resistant nickel alloy Inconel 718, made by high-temperature vacuum brazing
by: S. V. Maksimova, et al.
Published: (2010)

Strength of heat-resistant nickel alloy Inconel 718 brazed joints, produced using palladium brazing alloys
by: V. F. Khorunov, et al.
Published: (2010)

Mechanical properties of brazed joints of dispersion-strengthened copper alloy
by: S. V. Maksimova, et al.
Published: (2010)

Effect of palladium on structure and technological properties of Ag–Cu–Zn–Ni–Mn system brazing filler metals
by: V. F. Khorunov, et al.
Published: (2012)

Possibility of reduction in growth of intermetallic interlayer during brazing of steel using brazing alloys copper-phosphorus
by: A. A. Pisarev, et al.
Published: (2016)

Effect of depressants and base metal on microstructure of brazed seams in joints of Ni3Al-based alloys with Inconel 718 alloy
by: S. V. Maksimova, et al.
Published: (2015)

Arc brazing of low-carbon steels
by: V. F. Khorunov, et al.
Published: (2013)

New system of filler metals for brazing of titanium alloys
by: V. F. Khorunov, et al.
Published: (2012)

Brazing filler metal without boron and silicon for brazing of heat-resistant nickel alloy
by: S. V. Maksimova, et al.
Published: (2017)

Microstructure of brazed joints of nickel aluminides
by: S. V. Maksimova, et al.
Published: (2014)

Structural strength of welded joints of thermo-hardened Al–Cu–Mg alloy
by: O. P. Ostash, et al.
Published: (2019)

Formation of brazed joints of titanium aluminide
by: S. V. Maksimova
Published: (2009)

Flux arc brazing of aluminium with zinc-plated steel
by: V. F. Khorunov, et al.
Published: (2013)

Development of technology of titanium alloy brazing using brazing alloys on Al-Mg system base
by: V. V. Voronov
Published: (2013)

Fluxless brazing of aluminium alloys by brazing filler metal of Al-Ge system
by: O. M. Sabadash, et al.
Published: (2023)

Peculiarities of melting, structure and properties of nickel alloys of Ni–Mn–Cu system
by: V. F. Khorunov, et al.
Published: (2014)

Vacuum brazing of cast nickel alloy ZhS6U with composite brazing alloys on VPr-36 base. Part 1
by: I. S. Malashenko, et al.
Published: (2014)

Influence of Germanium as a Depressant on the Structure and Intervals of Melting of Palladium Alloys
by: S. V. Maksimova, et al.
Published: (2015)

Strength and microstructure of ZhS6U alloy brazed joints produced using complex boron- and silicon-containing brazing alloys
by: A. F. Beljavin, et al.
Published: (2010)

Development of brazing alloy, brazing technologies and correction of castings surface defects of heat-resistant nickel alloys for ship gas turbines
by: V. V. Kvasnytskyi, et al.
Published: (2021)

Geometrical parameters of the brazed seam and its structure in plasma brazing of galvanized steel
by: S. V. Maksymova, et al.
Published: (2020)

Phase transformations in the extruded brazing copper based alloys
by: V. K. Nosenko, et al.
Published: (2015)

Hardening of magnesium alloy ML4 in alloying with gallium
by: M. A. Khokhlov, et al.
Published: (2017)

Strain hardening of titanium alloys doped
by: A. V. Kotko
Published: (2013)

Features of solidification of complex- alloyed filler metals for brazing hightemperature nickel alloys
by: V. V. Kurenkova, et al.
Published: (2009)

Structure of an algoritsm for quick two-dimensional convolution by means of isomorphing hypercomplex numerical systems
by: Ja. A. Kalinovskij, et al.
Published: (2018)

Structure of an algoritsm for quick two-dimensional convolution by means of isomorphing hypercomplex numerical systems
by: Kalinovsky, Ya. A., et al.
Published: (2018)

Structure and strength properties of brazed joints of JS26NK cast nickel alloy. Part 2
by: Kurenkova, V.V., et al.
Published: (2008)

Brazing of alumina ceramic and graphite to titanium by amorphous foil Ti-20Zr–20Cu–20Ni. As the filler metal
by: Shapiro, A.E.
Published: (2015)

Brazing of alumina ceramic and graphite to titanium by amorphous foil Ti-20Zr–20Cu–20Ni. As the filler metal
by: A. E. Shapiro
Published: (2015)

Structure and phase composition of high-entropy AlCuNiFeTi alloy resulted from mechanical alloying
by: O. I. Yurkova, et al.
Published: (2014)

Features of the structure of molybdenum-covar brazed joints
by: S. V. Maksymova, et al.
Published: (2022)

Effect of structure of joint zone of diamond layer with hard-alloy substrate of brazed cutters on their service life
by: B. V. Stefaniv, et al.
Published: (2018)