Cover Image

Melting-pouring ladle with induction heating

Saved in:

Bibliographic Details
Date:	2010
Main Author:	V. O. Mushegjan
Format:	Article
Language:	English
Published:	2010
Series:	Electrometallurgy Today
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000466850
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Melting-pouring ladle with induction heating
by: V. A. Shapovalov, et al.
Published: (2010)

The investigation of the influence of both accumulating and ladle pouring processes on the blast-furnace operation
by: V. A. Petrenko, et al.
Published: (2014)

The microinhomogeneity metal melt and optimal temperature of pouring steel into molds
by: A. M. Skrebtsov, et al.
Published: (2017)

The change of the thermophysical features of the melt flow over a volumetric and locally heated substrate from a stationary pour device
by: R. S. Nadashkevych
Published: (2018)

Testing equipment to simulate the thermal processing of the melt in the ladle furnace
by: V. P. Piptjuk, et al.
Published: (2015)

Preparing the equipment for physical modeling of processes in the melt treatment ladle
by: V. P. Piptjuk, et al.
Published: (2014)

Numerical study of melt hydrodynamics in D.C. ladle-furnace unit
by: I. V. Krikent, et al.
Published: (2014)

Features of Rotary Processing of Aluminum Melts in the Ladle in the Rheo-Thixocasting Processes
by: V. P. Holovachenko, et al.
Published: (2020)

The influence of heating of mist flow in a ladle lance on the impulse of gas suspension jet that flows into the melt. Report 2
by: N. V. Kosolap, et al.
Published: (2012)

Problems of molten steel pouring at a low speed
by: A. K. Tsykulenko, et al.
Published: (2009)

Method of calculation the processes in tuyere for blowing a desulphurizer into the melt in a ladle
by: N. V. Kosolap, et al.
Published: (2011)

The study of temperature fields in the thickness of the lining and the height of the ladle during drying and heating of the steel-teeming ladles with different lining
by: P. A. Plokhikh, et al.
Published: (2018)

Formation of optimum conditions of electron beam heating in melting of molybdenum in installation MV-1
by: V. O. Mushegjan, et al.
Published: (2010)

The pouring out of dry sand from molds without dust
by: V. S. Doroshenko
Published: (2011)

Development of technology of melting and ladle treatment of steel using programming complex &quot;DesigningMelt&quot;
by: R. V. Sinjakov
Published: (2011)

Induction melting in sectional mold
by: B. E. Paton, et al.
Published: (2019)

Multiphysics modeling of the induction heating and melting of conductive workpieces with magnetic flux concentrator
by: A. D. Podoltsev, et al.
Published: (2015)

Electromagnetic, thermal and hydrodynamic processes at induction heating of output channel of glass melting furnace
by: I. V. Volkov, et al.
Published: (2018)

Influence of some factors on melt mixing during treatment on AC ladle furnace of middle power
by: V. P. Piptjuk, et al.
Published: (2011)

Innovation approaches and flexible solutions for metal pouring at the metallurgical micro-plants
by: V. I. Dubodelov, et al.
Published: (2016)

Electron beam melting of reduced concentrate of molybdenum
by: V. O. Mushegjan
Published: (2009)

Mathematical modeling of electron beam melting of molybdenum
by: V. O. Mushegjan
Published: (2011)

Induction melting of metals in sectional mould
by: B. E. Paton, et al.
Published: (2009)

Physical-chemical peculiarities of steel melt degassing from hydrogen during ladle treatment in electrostatic field
by: N. I. Zakharov, et al.
Published: (2014)

Use of Oxygen and Enriched Air in Heating Furnaces, Soaking Pits and Stands of Steel Casting Ladles Heating
by: I. N. Karp, et al.
Published: (2012)

Induction melting and refining of silicon in sectional mould
by: V. A. Shapovalov, et al.
Published: (2012)

New technology of molybdenum rod production using electron beam melting
by: V. O. Mushegjan
Published: (2013)

Effect of parameters of EBCH melting on properties of ingots of molybdenum and alloys on its base
by: V. O. Mushegjan
Published: (2013)

Optimizing the technology of electron beam melting of molybdenum using method of mathematical modeling
by: V. O. Mushegjan
Published: (2011)

Investigation of metal of ingots produced from recovered concentrate of molybdenum using ESCH melting method
by: V. O. Mushegjan
Published: (2010)

Features of application of the lining of teeming ladles
by: V. G. Gerasimenko, et al.
Published: (2018)

Features of the siphon method of filling in the formwhen receiving a large steel castingsin pouring speed
by: A. V. Dudchenko, et al.
Published: (2013)

Laboratory research process ladle desulphurization powder lime and granulated magnesium when applied to melt the low-voltage electrical potential
by: S. I. Semykin, et al.
Published: (2014)

A new approach to solving the problem of directional formation of final melts during steel debugging at a ladle-furnace unit
by: D. M. Tohobytska, et al.
Published: (2021)

Thermal state of hardening disc during extraction from melt in induction melting in sectional crystallizer
by: D. A. Kalashnik, et al.
Published: (2018)

The influence of blowing on hydrodynamics of metal in the casting ladle
by: M. K. Siharov, et al.
Published: (2016)

Continuous light-guide control of melts temperature in induction furnaces
by: L. Zhukov, et al.
Published: (2024)

Continuous Light-Guide Control of Melts Temperature in Induction Furnaces
by: Zhukov, Leonid, et al.
Published: (2024)

Comparison of different technologies ladle desulphurization magnesium
by: A. F. Shevchenko, et al.
Published: (2015)

Investigation of structure and mechanical properties of molybdenum produced by EBCH melting method
by: V. O. Mushegjan, et al.
Published: (2012)