Structure of diffusion layers of iron alloys after laser treatment in saturation atmosphere
Gespeichert in:
| Datum: | 2009 |
|---|---|
| Hauptverfasser: | Ye. V. Ivashchenko, N. V. Franchik, A. S. Khodakivskyi |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2009
|
| Schriftenreihe: | Metal Science and Treatment of Metals |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0000411339 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
Structure formation in iron alloys with Cr and Ti during laser chemical and heat treatment
von: N. V. Franchik, et al.
Veröffentlicht: (2011)
von: N. V. Franchik, et al.
Veröffentlicht: (2011)
The anomalous increasing of microhardening in surface layers of aluminium alloys after the laser alloying by copper and iron
von: V. V. Girzhon, et al.
Veröffentlicht: (2009)
von: V. V. Girzhon, et al.
Veröffentlicht: (2009)
Structure and tribological characteristics of heterogeneous alloy before and after laser treatment
von: V. H. Novytskyi, et al.
Veröffentlicht: (2011)
von: V. H. Novytskyi, et al.
Veröffentlicht: (2011)
Structure and topography of titanium alloys surface after thermal-diffusion saturation from boron carbide in vacuum
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2010)
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2010)
Regularities of thermal diffusion saturation with nitrogen, combined with standard heat treatment of BT22 alloys
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2016)
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2016)
The surface hardened layer formation a the chemical-heat treatment of iron, combined with electric-spark alloying
von: Ye. V. Ivashchenko, et al.
Veröffentlicht: (2010)
von: Ye. V. Ivashchenko, et al.
Veröffentlicht: (2010)
Oxygen diffusion saturation of hafnium with the different surface layer
von: V. S. Trush, et al.
Veröffentlicht: (2023)
von: V. S. Trush, et al.
Veröffentlicht: (2023)
Properties of iron-based shape memory alloy after thermomechanical treatment
von: A. N. Titenko, et al.
Veröffentlicht: (2013)
von: A. N. Titenko, et al.
Veröffentlicht: (2013)
Diffusion saturation of alloy VT6 by nitrogen, carbon, oxygen
von: M. M. Bobina, et al.
Veröffentlicht: (2011)
von: M. M. Bobina, et al.
Veröffentlicht: (2011)
Laser treatment as an additional method to increase the tribotechnical properties of alloys based on cast irons alloyed with Cu and S
von: E. A. Markovskij, et al.
Veröffentlicht: (2017)
von: E. A. Markovskij, et al.
Veröffentlicht: (2017)
The structure of the diffusion layer formed by the vacuum activated saturation of the solid BK-15 in the chromium nanopowder
von: S. G. Rudenkij
Veröffentlicht: (2011)
von: S. G. Rudenkij
Veröffentlicht: (2011)
Features of the formation and properties of coatings on steel after electric-spark alloying in liquid saturating environment with carbon-containing powder
von: S. I. Sydorenko, et al.
Veröffentlicht: (2014)
von: S. I. Sydorenko, et al.
Veröffentlicht: (2014)
Surface-Layers' Structure of Hypoeutectic Silumin after Laser Alloying by Mixture of the Copper and Cobalt Powders
von: V. V. Girzhon, et al.
Veröffentlicht: (2015)
von: V. V. Girzhon, et al.
Veröffentlicht: (2015)
Influence of laser treatment of surface on a structure and wearproof of chromic cast-iron
von: V. A. Loktionov-Remizovskyi, et al.
Veröffentlicht: (2009)
von: V. A. Loktionov-Remizovskyi, et al.
Veröffentlicht: (2009)
Physicomechanical characteristics of VT6 titanium alloy after surface deformation-diffusion treatment
von: T. M. Kravchyshyn, et al.
Veröffentlicht: (2020)
von: T. M. Kravchyshyn, et al.
Veröffentlicht: (2020)
Regularities of thermo-diffusion saturation of titanium alloys from amorphous boron in nitrogen
von: V. M. Fedirko, et al.
Veröffentlicht: (2011)
von: V. M. Fedirko, et al.
Veröffentlicht: (2011)
Features of the Structure State of the Al—Mg—Si-Alloy Surface Layers After Ultrasonic Impact Treatment
von: A. L. Berezina, et al.
Veröffentlicht: (2014)
von: A. L. Berezina, et al.
Veröffentlicht: (2014)
Influence of oxygen diffusion saturation on the fatigue and long-term static strength of titanium alloys
von: V. M. Fedirko, et al.
Veröffentlicht: (2014)
von: V. M. Fedirko, et al.
Veröffentlicht: (2014)
Structure formation of protective coatings on steels depending on the mode of diffusion saturation
von: M. V. Kindrachuk, et al.
Veröffentlicht: (2012)
von: M. V. Kindrachuk, et al.
Veröffentlicht: (2012)
Structure and properties of superficial layers of EP 823 steel at laser alloying
von: Z. A. Durjagіna, et al.
Veröffentlicht: (2010)
von: Z. A. Durjagіna, et al.
Veröffentlicht: (2010)
Structure of surfaced zone of cast high-nickel alloy KhN56MBYuDSh after laser surface treatment
von: A. A. Polishko, et al.
Veröffentlicht: (2014)
von: A. A. Polishko, et al.
Veröffentlicht: (2014)
The structure and properties of surface layers in iron after preliminary plastic deformation and nitriding
von: L. D. Demchenko, et al.
Veröffentlicht: (2015)
von: L. D. Demchenko, et al.
Veröffentlicht: (2015)
Effect of time of surface heat treatment and structure of powder iron-carbon alloys
von: A. V. Minitskyi, et al.
Veröffentlicht: (2016)
von: A. V. Minitskyi, et al.
Veröffentlicht: (2016)
Structure and properties of aluminiums alloys after treatments by the concentrated flows of energy
von: A. D. Pogrebnjak, et al.
Veröffentlicht: (2007)
von: A. D. Pogrebnjak, et al.
Veröffentlicht: (2007)
Influence of VT22 alloy structural factors on surface hardening during deformation-diffusion treatment
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2017)
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2017)
The structure and crystallisation of laser condensates vanadium deposited in oxygen atmosphere
von: Bagmut, A.G., et al.
Veröffentlicht: (2006)
von: Bagmut, A.G., et al.
Veröffentlicht: (2006)
Mossbauer analysis of the structure Fe-Ni-C alloys after heat and ultrasonic treatments
von: Nadutov, V.M., et al.
Veröffentlicht: (2004)
von: Nadutov, V.M., et al.
Veröffentlicht: (2004)
The surface thermal treatment of powder iron-carbon alloys
von: A. V. Minitskyi, et al.
Veröffentlicht: (2015)
von: A. V. Minitskyi, et al.
Veröffentlicht: (2015)
Kinetics of diffusion saturation of VT1-0 titanium alloy by nitrogen and oxygen at a temperature of 950?S
von: Ya. S. Matychak, et al.
Veröffentlicht: (2013)
von: Ya. S. Matychak, et al.
Veröffentlicht: (2013)
Formation of Aluminium Surface Layers’ Structure during Laser Alloying with Copper and Cobalt Powders
von: Girzhon, V.V., et al.
Veröffentlicht: (2013)
von: Girzhon, V.V., et al.
Veröffentlicht: (2013)
Peculiarities of saturation with deuterium of vacuum-arc coatings based on iron
von: H. D. Tolstolutska, et al.
Veröffentlicht: (2020)
von: H. D. Tolstolutska, et al.
Veröffentlicht: (2020)
Radiation dynamics of injection lasers with saturating absorber in resonator
von: Manak, I.S.
Veröffentlicht: (2008)
von: Manak, I.S.
Veröffentlicht: (2008)
Influence of plastic prestrain on boron and carbon diffusion in iron based alloys
von: Yu. Filonenko, et al.
Veröffentlicht: (2010)
von: Yu. Filonenko, et al.
Veröffentlicht: (2010)
Residual stresses and mechanical properties of turbine blades after laser treatment of surface
von: Ja. Dzjankhua, et al.
Veröffentlicht: (2010)
von: Ja. Dzjankhua, et al.
Veröffentlicht: (2010)
Hydrogen-diffusion mechanical treatment of structural materials
von: Ya. M. Hladkyi, et al.
Veröffentlicht: (2019)
von: Ya. M. Hladkyi, et al.
Veröffentlicht: (2019)
One- and two-component diffusion saturation of titanium with interstitial elements
von: Ya. S. Matychak, et al.
Veröffentlicht: (2013)
von: Ya. S. Matychak, et al.
Veröffentlicht: (2013)
Influence of the hydrogen saturation temperature on the structure of melt-spun Ti₃₀Zr₄₅Ni₂₅ alloy
von: Dmytrenko, O.Ye., et al.
Veröffentlicht: (2018)
von: Dmytrenko, O.Ye., et al.
Veröffentlicht: (2018)
Influence of low-temperature treatment on the properties of the amorphous iron alloys
von: O. M. Hertsyk, et al.
Veröffentlicht: (2016)
von: O. M. Hertsyk, et al.
Veröffentlicht: (2016)
Surface laser treatment of sintered alloy Cu—30% (wt. ) Cr
von: V. P. Korzhov
Veröffentlicht: (2014)
von: V. P. Korzhov
Veröffentlicht: (2014)
Formation of multi layer electrospark coatings on iron in the carbonaceous mediums
von: K. M. Khranovska, et al.
Veröffentlicht: (2011)
von: K. M. Khranovska, et al.
Veröffentlicht: (2011)
Ähnliche Einträge
-
Structure formation in iron alloys with Cr and Ti during laser chemical and heat treatment
von: N. V. Franchik, et al.
Veröffentlicht: (2011) -
The anomalous increasing of microhardening in surface layers of aluminium alloys after the laser alloying by copper and iron
von: V. V. Girzhon, et al.
Veröffentlicht: (2009) -
Structure and tribological characteristics of heterogeneous alloy before and after laser treatment
von: V. H. Novytskyi, et al.
Veröffentlicht: (2011) -
Structure and topography of titanium alloys surface after thermal-diffusion saturation from boron carbide in vacuum
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2010) -
Regularities of thermal diffusion saturation with nitrogen, combined with standard heat treatment of BT22 alloys
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2016)