To the Analysis of Creep Strains of the Thin-Wall Tubular Elements Made of the Linearly Viscoelastic Materials in Conditions of Tension with Torsion
Збережено в:
| Дата: | 2022 |
|---|---|
| Автори: | V. P. Holub, Ya. V. Pavliuk, V. S. Rieznyk |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2022
|
| Назва видання: | International Applied Mechanics |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0001344137 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
To Analysis of Creep Strains and Stress Relaxations in Thin-Wall Tubular Elements Made of Linearly Viscoelastic Materials. 1. Superposition of Shear and Volume Creep
за авторством: V. P. Golub, та інші
Опубліковано: (2020)
за авторством: V. P. Golub, та інші
Опубліковано: (2020)
Creep Failure Time of Thin-Walled Pipes under Combined Internal Pressure, Bending, and Tension
за авторством: El Megharbel, A.
Опубліковано: (2010)
за авторством: El Megharbel, A.
Опубліковано: (2010)
Effect of Non-Stechiometry and Different-Strength of Perovskite to the Tension-Compression on the Diffusional Creep of Thick-Wall Cylinder Made of Perovskite
за авторством: O. O. Zolochevskyi, та інші
Опубліковано: (2021)
за авторством: O. O. Zolochevskyi, та інші
Опубліковано: (2021)
Calculation of the Tubular Elements Made of Pressed Profiles
за авторством: M. M. Hrebennikov, та інші
Опубліковано: (2023)
за авторством: M. M. Hrebennikov, та інші
Опубліковано: (2023)
Calculation of the Tubular Elements Made of Pressed Profiles
за авторством: Гребенніков, М. М., та інші
Опубліковано: (2023)
за авторством: Гребенніков, М. М., та інші
Опубліковано: (2023)
Calculation of the Tubular Elements Made of Pressed Profiles
за авторством: Гребенніков, М. М., та інші
Опубліковано: (2023)
за авторством: Гребенніков, М. М., та інші
Опубліковано: (2023)
Estimation of the periods of creep-fatigue crack initiation and growth in thin-walled structural elements
за авторством: Ye. Andreikiv, та інші
Опубліковано: (2011)
за авторством: Ye. Andreikiv, та інші
Опубліковано: (2011)
Long-term durability of the thin-walled structural elements with the low-temperature creep cracks under static loading
за авторством: Yu. Ya. Matviiv
Опубліковано: (2012)
за авторством: Yu. Ya. Matviiv
Опубліковано: (2012)
Torsion of an unevenly loaded tubular belt on a straight route of a belt tubular conveyor
за авторством: T. I. Zhihula
Опубліковано: (2019)
за авторством: T. I. Zhihula
Опубліковано: (2019)
Development of technology and equipment for diagnostics by the method of electron shearography of elements of thin-walled structures made with application of spot welding
за авторством: L. M. Lobanov, та інші
Опубліковано: (2010)
за авторством: L. M. Lobanov, та інші
Опубліковано: (2010)
Theoretical research of the influencing of the basic parameters of tubular belt conveyors on the magnitude of risk of tubular belt torsion
за авторством: T. I. Zhyhula, та інші
Опубліковано: (2023)
за авторством: T. I. Zhyhula, та інші
Опубліковано: (2023)
Constructing the Criterion of Long-Term Failure owing to Creep of Thin-Wall Layered Structures
за авторством: B. P. Maslov
Опубліковано: (2024)
за авторством: B. P. Maslov
Опубліковано: (2024)
Hydrogen influence on the durability of a thin-walled sample under high-temperature creep
за авторством: O. Y. Chepil
Опубліковано: (2024)
за авторством: O. Y. Chepil
Опубліковано: (2024)
Development of Technology and Creation of Test Equipment for Pressure Welding of High-Load Thin-Walled Heterogeneous Steel Tubular Parts
за авторством: V. S. Kachynskyi, та інші
Опубліковано: (2021)
за авторством: V. S. Kachynskyi, та інші
Опубліковано: (2021)
Determination of Parameters of Heredity Kernels of Nonlinearly Viscoelastic Isotropic Materials under Torsion
за авторством: V. P. Golub, та інші
Опубліковано: (2015)
за авторством: V. P. Golub, та інші
Опубліковано: (2015)
Correlation of uniaxial cyclic torsion and tension-compression for low-cycle fatigue
за авторством: T. Lagoda, та інші
Опубліковано: (2017)
за авторством: T. Lagoda, та інші
Опубліковано: (2017)
Mathematic modeling of stress-strain state of the belt linear sector in the tubular conveyor
за авторством: R. V. Kirija, та інші
Опубліковано: (2016)
за авторством: R. V. Kirija, та інші
Опубліковано: (2016)
Elastoplastic Axisymmetric Stress-Strain State of Thin Shells from Materials with Different Strength to Tension and Compression
за авторством: M. O. Babeshko, та інші
Опубліковано: (2021)
за авторством: M. O. Babeshko, та інші
Опубліковано: (2021)
Analysis of the stress-strain state of the Bridgman specimen by the finite elements method under axial tension
за авторством: T. M. Lenkovskyi, та інші
Опубліковано: (2020)
за авторством: T. M. Lenkovskyi, та інші
Опубліковано: (2020)
Calculation of the stress-strain state, creep and creep-damage of multilayer plates on the elastic foundation
за авторством: V. A. Bogomolov, та інші
Опубліковано: (2014)
за авторством: V. A. Bogomolov, та інші
Опубліковано: (2014)
Calculation of the stress-strain state, creep and creep-damage of multilayer plates on the elastic foundation
за авторством: Богомолов, В. А., та інші
Опубліковано: (2014)
за авторством: Богомолов, В. А., та інші
Опубліковано: (2014)
Calculation of the stress-strain state, creep and creep-damage of multilayer plates on the elastic foundation
за авторством: Богомолов, В. А., та інші
Опубліковано: (2014)
за авторством: Богомолов, В. А., та інші
Опубліковано: (2014)
Creep and viscoelasticity of Ti3AlC2 MAX-phase at room temperature
за авторством: S. M. Dub, та інші
Опубліковано: (2020)
за авторством: S. M. Dub, та інші
Опубліковано: (2020)
Models of Long-Term Brittle Fracture of Rods under Tension and Compression in Condition of Creep
за авторством: Ju. M. Kobzar
Опубліковано: (2017)
за авторством: Ju. M. Kobzar
Опубліковано: (2017)
An Identification of Heredity Kernels of the Isotropic Linear Viscoelastic Materials under Combined Stress State. 1. Superposition of the Shear and Volume Creep
за авторством: V. P. Golub, та інші
Опубліковано: (2016)
за авторством: V. P. Golub, та інші
Опубліковано: (2016)
Evaluation of the admissible sizes of faulty fusions of thin-walled cell elements
за авторством: M. H. Stashchuk
Опубліковано: (2014)
за авторством: M. H. Stashchuk
Опубліковано: (2014)
Creep of Bodies of Revolution of Complex Shape made of Functionally Gradient Materials
за авторством: S. M. Sklepus
Опубліковано: (2022)
за авторством: S. M. Sklepus
Опубліковано: (2022)
Stress-strain state of fragments of iron-concrete monolithic overlapping with tubular insertions
за авторством: I. V. Melnyk
Опубліковано: (2016)
за авторством: I. V. Melnyk
Опубліковано: (2016)
A tension of thick-walled shell of finite length with faces covered by diaphragm
за авторством: Yu. D. Kovalov, та інші
Опубліковано: (2013)
за авторством: Yu. D. Kovalov, та інші
Опубліковано: (2013)
Discretization of Thin-Walled Sections with Variable Wall Thickness
за авторством: Гребенніков, М. М., та інші
Опубліковано: (2025)
за авторством: Гребенніков, М. М., та інші
Опубліковано: (2025)
Discretization of Thin-Walled Sections with Variable Wall Thickness
за авторством: Гребенніков, М. М., та інші
Опубліковано: (2025)
за авторством: Гребенніков, М. М., та інші
Опубліковано: (2025)
Bending of Plates with Complex Shape Made from Materials that Differently Resist to Tension and Compression
за авторством: S. M. Sklepus
Опубліковано: (2023)
за авторством: S. M. Sklepus
Опубліковано: (2023)
Bending of Plates with Complex Shape Made from Materials that Differently Resist to Tension and Compression
за авторством: Склепус, C. М.
Опубліковано: (2025)
за авторством: Склепус, C. М.
Опубліковано: (2025)
Bending of Plates with Complex Shape Made from Materials that Differently Resist to Tension and Compression
за авторством: Склепус, C. М.
Опубліковано: (2025)
за авторством: Склепус, C. М.
Опубліковано: (2025)
Laser welding of thin-wall filter elements of steel 08Kh18N10T
за авторством: V. D. Sheljagin, та інші
Опубліковано: (2017)
за авторством: V. D. Sheljagin, та інші
Опубліковано: (2017)
Estimation of residual life-time of thin-walled structural elements with short corrosion-fatigue cracks
за авторством: Ye. Andreikiv, та інші
Опубліковано: (2017)
за авторством: Ye. Andreikiv, та інші
Опубліковано: (2017)
Examination of tubular metal structures of frame elements of Chernobyl NPP ventilation pipe
за авторством: V. A. Troitskij, та інші
Опубліковано: (2014)
за авторством: V. A. Troitskij, та інші
Опубліковано: (2014)
An Asymptotic Linear Thin-Walled Rod Model Coupling Twist and Bending
за авторством: Hamdouni, A., та інші
Опубліковано: (2010)
за авторством: Hamdouni, A., та інші
Опубліковано: (2010)
Analysis of the Thermal Mode of an Electrically Conductive Tubular Element with a Thin External Electrically Conductive Coating Under te Action of an Unstable Electromagnetic Field
за авторством: R. S. Musii, та інші
Опубліковано: (2022)
за авторством: R. S. Musii, та інші
Опубліковано: (2022)
Analysis of the Thermal Mode of an Electrically Conductive Tubular Element with a Thin External Electrically Conductive Coating Under the Action of an Unstable Electromagnetic Field
за авторством: Мусій, Роман, та інші
Опубліковано: (2022)
за авторством: Мусій, Роман, та інші
Опубліковано: (2022)
Схожі ресурси
-
To Analysis of Creep Strains and Stress Relaxations in Thin-Wall Tubular Elements Made of Linearly Viscoelastic Materials. 1. Superposition of Shear and Volume Creep
за авторством: V. P. Golub, та інші
Опубліковано: (2020) -
Creep Failure Time of Thin-Walled Pipes under Combined Internal Pressure, Bending, and Tension
за авторством: El Megharbel, A.
Опубліковано: (2010) -
Effect of Non-Stechiometry and Different-Strength of Perovskite to the Tension-Compression on the Diffusional Creep of Thick-Wall Cylinder Made of Perovskite
за авторством: O. O. Zolochevskyi, та інші
Опубліковано: (2021) -
Calculation of the Tubular Elements Made of Pressed Profiles
за авторством: M. M. Hrebennikov, та інші
Опубліковано: (2023) -
Calculation of the Tubular Elements Made of Pressed Profiles
за авторством: Гребенніков, М. М., та інші
Опубліковано: (2023)